top of page

Home  ›  Products  ›  Hydraulic Grips  ›  Hydraulic Single-Action Grip 300 kN

UGC-HG-080 symmetric hydraulic single-action grip 300 kN by Universal Grip
UGC-HG-080 symmetric hydraulic single-action grip 300 kN by Universal Grip
UGC-HG-080 Hydraulic Single-Action Grip 300 kN by Universal Grip, view 2
UGC-HG-080 Hydraulic Single-Action Grip 300 kN by Universal Grip, view 3
UGC-HG-080 Hydraulic Single-Action Grip 300 kN by Universal Grip, view 4

Hydraulic Single-Action Grip 300 kN – 0–60 mm Opening

Symmetric hydraulic grip with spring return: 600 kN clamping at 700 bar, a 300 kN tensile rating and a 0–60 mm opening for heavy round and flat specimens.

Brand: Universal Grip  |  Model: UGC-HG-080  |  ● Configured to order

  • Rated for 300 kN (about 67,400 lbf) maximum tensile load

  • 600 kN (about 134,900 lbf) clamping force at 700 bar (10,150 psi)

  • Two rods close symmetrically, keeping specimens centered

  • Spring return opens the jaws once pressure is released

  • Jaw opening 0–60 mm (0–2.36 in) for large rounds and thick flats

  • V-jaws for bar from 8 to 60 mm diameter, 120 mm (4.72 in) clamping height

  • Rigid or self-aligning Ø 156 mm compression platen attachments

Standards: ASTM A370  ·  ASTM A615  ·  ASTM F606

Trusted by Global Companies

Symmetric hydraulic grip for heavy bar, rebar and fastener tests

The UGC-HG-080 uses 700 bar hydraulics to hold large round and flat specimens without any mechanical tightening. Two rods close symmetrically from either side, producing 600 kN (about 134,900 lbf) of clamping force at 700 bar (10,150 psi) for a maximum tensile load of 300 kN (about 67,400 lbf). The 0–60 mm (0–2.36 in) opening takes heavy rebar, threaded rod, wire rope terminations and thick flat bar, and the symmetric closing keeps each specimen on the load axis whatever its diameter.

 

Single-action or double-action

The single-action version closes hydraulically and opens on spring return, so the jaws release as soon as pressure is let off at the end of the test. A double-action version without spring return is available at the same 300 kN rating for setups where the hydraulic system drives both strokes. For larger work, a 600 kN version without spring return develops 1200 kN of clamping and couples with a female clevis for a Ø 80 mm (3.15 in) pin. Whichever version you choose, specify the 700 bar hydraulic pump you will use.

 

Jaws

V-jaws for round specimens come in two ranges, 8–35 mm and 30–60 mm diameter, each with a 120 mm (4.72 in) clamping height for a long, even grip on bar and rod. The jaws are hardened and the body is nickel-plated steel, rated 0 to +70 °C (32 to 158 °F) with other ranges on request. Jaws for heavy flat specimens are configured at quote to suit your section.

 

Compression without changing grips

A rigid or self-aligning steel compression platen, Ø 156 mm (6.14 in), attaches directly to the grip. That lets a lab move from a tensile pull to a compression test on the same frame without removing the grips.

 

Typical applications

  • Steel bar and rebar

  • Wire rope terminations

  • Bolts and threaded rod

  • Heavy flat specimens

Common programs include ASTM A370 on steel products and ASTM F606 on externally threaded fasteners.

 

Machine fit

The standard coupling is a female clevis for a Ø 60 mm (2.36 in) pin, with others on request. The grip suits Galdabini floor-standing and hydraulic universal testing machines of 300 kN and above. For 400–600 kN tension and compression with wedge action, see the UGC-HG-070 hydraulic wedge grips.

Specify single- or double-action, coupling, jaw type and diameter range, and the 700 bar pump available, and we will quote the setup: request a quote.

Product video

At a glance

  • Max. tensile load: 300 kN

  • Clamping force: 600 kN at 700 bar

  • Jaw opening: 0–60 mm

  • Jaw size: V-jaws, 120 mm clamping height

  • Coupling: Female clevis, Ø 60 mm pin; others on request

  • Body material: Steel, nickel-plated; jaws hardened

Hydraulic Single-Action Grip 300 kN Specifications

MAX. TENSILE LOAD

300 kN

 

CLAMPING FORCE

600 kN at 700 bar

 

JAW OPENING

0–60 mm

 

JAW SIZE

V-jaws, 120 mm clamping height

 

COUPLING

Female clevis, Ø 60 mm pin; others on request

 

BODY MATERIAL

Steel, nickel-plated; jaws hardened

 

OPERATION

Hydraulic, single-action with spring return

 

TEMPERATURE RANGE

0 to +70 °C; other ranges on request

 

COMPRESSION PLATEN

Rigid or self-aligning, Ø 156 mm (option)

 

PART REF.

UGC-HG-080

 

Models & Options

  • Single-action — Spring return, 300 kN (Specify at order)

  • Double-action — Without spring return, 300 kN (Specify at order)

  • 600 kN version — 1200 kN clamping, female clevis Ø 80 mm pin (Specify at order)

  • V-jaws 8–35 mm — Round specimens, 120 mm clamping height (Specify at order)

  • V-jaws 30–60 mm — Round specimens, 120 mm clamping height (Specify at order)

  • Compression platen — Rigid or self-aligning steel, Ø 156 mm (Specify at order)

  • Jaws for flat specimens — Configured to the specimen section (On request)

What's Included

  • Hydraulic grip, single- or double-action as ordered

  • V-jaw sets chosen by diameter range at order

  • Compression platens are optional attachments

  • 700 bar hydraulic pump: specify the unit to be used

Supported Test Standards

  • ASTM A370 — Mechanical testing of steel bar, plate and fasteners

  • ASTM A615 — Carbon-steel reinforcing bar

  • ASTM F606 — Mechanical properties of externally threaded fasteners

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-HG-070 Hydraulic Wedge Grips 400-600 kN

UGC-HG-070 Hydraulic Wedge Grips 400-600 kN

Heavy-duty hydraulic wedge grips rated 400 kN or 600 kN for tension, compression and dynamic tests on flat and round met

UGC-HG-090 Hydraulic Non-Shift Wedge Grip 100 kN

UGC-HG-090 Hydraulic Non-Shift Wedge Grip 100 kN

Hydraulic wedge grip whose jaws hold their vertical position while the body closes them, so short and sensitive specimen

UGC-HG-060 Hydraulic Grip 60-180 kN Clamping

UGC-HG-060 Hydraulic Grip 60-180 kN Clamping

Spring-return hydraulic grips built on Ø 50 mm pistons: 60 kN clamping at 315 bar with one piston, 180 kN with three, in

UGC-HG-100 Large Hydraulic Grip 1200 kN

UGC-HG-100 Large Hydraulic Grip 1200 kN

Enclosed, opposed-cylinder hydraulic grip that applies 1200 kN of clamping load to heavy plate, large-diameter bar, chai

Hydraulic Single-Action Grip 300 kN FAQ

What does single-action mean on the UGC-HG-080?

The grip closes hydraulically and opens by spring return. A double-action version without spring return is also available.

 

What hydraulic pressure does it need?

Rated clamping force of 600 kN is reached at 700 bar (10,150 psi), so the grip needs a 700 bar pump.

 

What diameter range do the V-jaws cover?

Two sets cover 8–35 mm and 30–60 mm diameter, each with a 120 mm clamping height.

 

Can I run compression tests without removing the grip?

Yes. A rigid or self-aligning Ø 156 mm compression platen attaches directly to the grip.

 

Is there a higher-capacity version?

Yes. A 600 kN version without spring return develops 1200 kN clamping and uses a female clevis for a Ø 80 mm pin.

 

How does it connect to the machine?

By a female clevis for a Ø 60 mm pin. Other couplings are available on request, and adapters fit most frames.

 

Need help configuring a hydraulic grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page