Home › Products › Puncture Fixtures › Textile Elasticity Fixture ISO 20932-2





Textile Elasticity Fixture ISO 20932-2
Ring clamp and hemispherical probe that stretch a clamped fabric in every direction at once to measure multiaxial elasticity to ISO 20932-2.
Brand: Universal Grip | Model: UGC-PF-010 | ● Configured to order
Arranged to the ring-and-probe setup shown in ISO 20932-2, Figures 2 and 3
Ring clamp restrains the fabric evenly around its whole edge
Hemispherical probe draws the fabric into a dome, loading it multiaxially
Column stand leaves clear travel for the probe below the ring
Clamping screws make specimen changes quick between runs
Clevis pin coupling on the probe; other machine connections via adapters
Standards: ISO 20932-2
Trusted by Global Companies


























Multiaxial elasticity fixture for knitted and elastic fabrics
The UGC-PF-010 is a ring-and-probe fixture for measuring how textile fabrics stretch and recover when they are deformed in all directions at the same time. It is configured to the arrangement shown in ISO 20932-2, Figures 2 and 3, and is aimed at textile labs, sportswear and medical textile developers, and QC teams who need more than a single-direction strip test can tell them. A knit worn over a knee or shoulder is stretched biaxially in use; this fixture puts the same kind of loading on a flat specimen in the lab.
How it works
The fabric is clamped in a ring holder mounted on a column stand. Clamping screws close the ring around the specimen so it is restrained uniformly around its edge, without the local pinch that flat jaws create. A hemispherical probe, connected to the crosshead by a clevis pin coupling, is then driven through the ring. As it advances, the fabric is drawn into a dome and stretched in every direction at once. The testing machine records force against probe travel, and that curve, together with the return stroke, describes the stretch and recovery behavior of the fabric.
The column stand lifts the ring high enough that the probe has clear travel below the specimen plane, which matters for highly extensible knits that deform a long way before the test ends. The clamping screws are easy to reach, so loading the next specimen takes little time.
Typical applications
Knitted fabrics
Elastic textiles
Sportswear and medical textiles
Nets and meshes
Configuring the fixture
Maximum load is set on request, because elasticity tests span a wide range of forces depending on fabric weight and construction. Tell us the fabric types you test and the load range you expect, and the fixture is sized to suit. The probe connects with a clevis pin coupling; other coupling sizes, and the connection between the column stand base and your machine, are handled with adapters. The fixture is made of steel and aluminum.
Fabric elasticity work is usually a low-force job, so a Mark-10 F-series motorized tensile tester (100 to 1,500 lbF) or a Galdabini benchtop universal testing machine is a sensible platform; the choice depends on the peak force of your heaviest fabric and the probe travel you need. If you also need burst strength, the UGC-PF-060 ball burst fixture pushes a ball through a clamped fabric to rupture. Other fabric, film and membrane fixtures are on our puncture fixtures page, and fabric grips are on the textiles page.
Send us your fabric type, expected load range and the couplings on your machine, and we will configure the fixture: request a quote.
Textile Elasticity Fixture ISO 20932-2 Specifications
TEST TYPE
Multiaxial elasticity (probe push-through)
STANDARD
ISO 20932-2, Fig. 2 and 3
SPECIMEN
Fabric, clamped in ring holder
SPECIMEN HOLDER
Ring clamp with clamping screws on a column stand
PROBE
Hemispherical
MAX. LOAD
On request
COUPLING
Clevis pin coupling; other sizes via adapters
MATERIAL
Steel / aluminum
DRAWINGS
Dimensional drawings and 3D models on request
PART REF.
UGC-PF-010
Models & Options
Load range — Fixture sized to the forces your fabrics reach (On request)
Probe coupling — Clevis pin connection to the crosshead; other sizes via adapters (Specify at order)
Base coupling — Connection of the column stand to your machine (Specify at order)
Custom versions — Modified ring or probe for non-standard specimens (On request)
What's Included
Ring holder with clamping screws on a column stand
Hemispherical probe with clevis pin coupling
Probe and base couplings to suit your machine, specified at order
Adapters for other coupling sizes are available separately
Supported Test Standards
ISO 20932-2 — Elasticity of fabrics, multiaxial test (Figures 2 and 3)
Compatible Grips & Fixtures
Puncture Fixtures — Probe and ring fixtures for fabrics, films and membranes
UGC-PF-060 Ball Burst Puncture Fixture — Bursting strength of knits and nonwovens
Textiles Testing — Grips and fixtures for fabric tensile, tear and burst tests
Motorized Tensile Testers — Mark-10 F-series frames for low-force fabric work
Benchtop UTMs — Galdabini frames from 2.5 kN
Adapters — Couplings for the probe and column stand
“Customer quote”
Related Equipment
UGC-PF-060 Ball Burst Puncture Fixture ISO 9073-5
Ring clamp with 44.45 mm opening and 25.4 mm ball probe for bursting strength of knits, nonwovens and coated fabrics, ra
UGC-PF-020 Bi-Metal Coin Core Push-Out Fixture
Compression fixture that punches the center pill out of a bi-metal coin or token and records the push-out shear force ho
UGC-PF-030 Geomembrane Index Puncture Fixture
Ring clamp with 45 mm opening and hardened 8 mm probe for index puncture tests on geomembranes and geosynthetics to ASTM
UGC-PF-040 Dental Ceramic Biaxial Flexure Fixture ISO 6872
Piston-on-three-balls fixture with tungsten carbide piston for biaxial flexural strength of dental ceramic discs to ISO
Textile Elasticity Fixture ISO 20932-2 FAQ
What does the UGC-PF-010 measure?
The multiaxial elasticity of textile fabrics: force and extension as a hemispherical probe stretches a ring-clamped specimen, which describes its stretch and recovery behavior.
Which standard is it set up for?
ISO 20932-2, using the ring-and-probe arrangement shown in Figures 2 and 3 of that standard.
Why use a ring clamp instead of tensile grips?
The ring restrains the fabric evenly around its whole edge, so the probe stretches it in all directions at once instead of along one axis, as happens in a strip test.
What is the maximum load?
Maximum load is on request. Tell us your fabrics and expected force range and the fixture is sized to match.
How does it attach to my machine?
The probe uses a clevis pin coupling. Other sizes and the base connection are handled with adapters.
Which machine should I run it on?
Fabric elasticity tests are usually low force, so a Mark-10 F-series motorized tester or a Galdabini benchtop UTM is typical; we can help size the frame.




