Home › Products › Puncture Fixtures › Bi-Metal Coin Core Push-Out Fixture





Bi-Metal Coin Core Push-Out Fixture
Compression fixture that punches the center pill out of a bi-metal coin or token and records the push-out shear force holding the press fit.
Brand: Universal Grip | Model: UGC-PF-020 | ● Configured to order
Gives one comparable number for core-to-ring press-fit strength: peak push-out force
Works on circulation coins and on casino or gaming tokens
Coin seat made to your coin diameter so the outer ring is located precisely
Hollow support with viewing window to see and retrieve the ejected core
Round punch carried in the upper adapter
Nickel-coated steel resists corrosion in daily QC handling
Downloads and standards
Trusted by Global Companies


























Push-out fixture for bi-metal coin and token cores
The UGC-PF-020 measures the force needed to press the center pill out of a bi-metal coin or token. Bi-metal coins, such as the 1 euro coin, are assembled by pressing a core of one alloy into a ring of another, and the joint is held by the fit alone. Mints, blank suppliers and token makers use a push-out test to confirm that the joint will survive circulation, coin mechanisms and rough handling. The peak force at which the core lets go is a direct, comparable measure of press-fit strength from lot to lot.
How it works
The coin sits in a seat on top of a hollow cylindrical support. The seat locates the outer ring and leaves the core unsupported over the bore. A round punch, mounted in the upper adapter, comes down on the core in compression and shears it out through the ring. The ejected core drops into the hollow support, where a viewing window lets the operator see it and take it out. The testing machine records force against punch travel, and the maximum is reported as the core push-out shear force.
The fixture is made from nickel-coated steel, so the seat and punch stay free of corrosion in a production environment where coins are handled all day.
Made to your coin
Coin and token formats vary, so the seat is made to the outer diameter of your coin and the punch to suit its core. Maximum load is also set on request to cover the push-out force you expect. When you order, give us the coin or token diameter, the core diameter, an estimate of the push-out force and your machine coupling. The standard connection is a female clevis with a Ø 15.9 mm (5/8 in) pin; other machines are covered with adapters. Dimensional drawings or 3D models are available before you commit.
Typical applications
Mint quality control
Bi-metal coin production
Casino token testing
Press-fit joint strength checks
Machine fit
The test runs in compression on any frame with a suitable force range. A Galdabini benchtop universal testing machine covers a wide spread of forces, and where push-out loads are moderate a Mark-10 F-series motorized tester (100 to 1,500 lbF) can handle it. Settle the frame once you know what your coins reach; we can help with sizing. For other punch-through and shear setups, see our shear fixtures and puncture fixtures.
Send us your coin and core dimensions, the expected push-out force and your machine coupling, and we will quote the fixture: request a quote.
Bi-Metal Coin Core Push-Out Fixture Specifications
TEST TYPE
Compression / core push-out shear
SPECIMEN
Bi-metal coins and tokens
COIN SEAT
Made to the coin diameter
SUPPORT
Hollow cylinder with viewing window
PUNCH
Round punch in upper adapter
MAX. LOAD
On request
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin
MATERIAL
Steel, nickel-coated
DRAWINGS
Dimensional drawings and 3D models on request
PART REF.
UGC-PF-020
Models & Options
Coin seat — Machined to your coin or token outer diameter (Specify at order)
Punch — Sized to the core diameter (Specify at order)
Load rating — Matched to your expected push-out force (On request)
Machine coupling — Female clevis Ø 15.9 mm standard; others via adapters (Specify at order)
What's Included
Hollow cylindrical support with coin seat and viewing window
Round punch in upper adapter
Seat and punch made to the coin dimensions you specify
Adapters for other machine couplings are available separately
Supported Test Standards
Standards list
Compatible Grips & Fixtures
Shear Fixtures — Other fixtures for shear and punch-out tests
Compression Fixtures — Fixtures for compression-mode testing
Benchtop UTMs — Galdabini frames from 2.5 kN
Motorized Tensile Testers — Mark-10 F-series for moderate push-out forces
Metals Testing — Fixtures and grips for metal parts and joints
Adapters — Couplings for non-standard machine connections
“Customer quote”
Related Equipment
UGC-PF-010 Textile Elasticity Fixture ISO 20932-2
Ring clamp and hemispherical probe that stretch a clamped fabric in every direction at once to measure multiaxial elasti
UGC-PF-030 Geomembrane Index Puncture Fixture
Ring clamp with 45 mm opening and hardened 8 mm probe for index puncture tests on geomembranes and geosynthetics to ASTM
UGC-PF-040 Dental Ceramic Biaxial Flexure Fixture ISO 6872
Piston-on-three-balls fixture with tungsten carbide piston for biaxial flexural strength of dental ceramic discs to ISO
UGC-PF-050 Geotextile Static Puncture Fixture
50 kN CBR-type static puncture fixture with sample positioning tool for geotextiles and geogrids, used for ASTM D6241 an
Bi-Metal Coin Core Push-Out Fixture FAQ
What does the push-out test tell me?
The peak force needed to shear the core out of the ring, which is a direct measure of the press-fit strength between the two parts of a bi-metal coin or token.
Can it test gaming tokens as well as coins?
Yes. The fixture suits circulation coins and casino or gaming tokens; the seat is made to the diameter of the piece you test.
What do I need to tell you to order?
The coin or token diameter, the core diameter, the push-out force you expect and your machine coupling.
What is the maximum load?
It is set on request to match your coins. Give us an estimate of the push-out force and we will size the punch and support.
How does the operator remove the core after the test?
The core drops into the hollow support, and a viewing window lets the operator see it and take it out.
Which machine should I use?
Any frame that covers your push-out force in compression, such as a Galdabini benchtop UTM or, for moderate forces, a Mark-10 motorized tester.




