top of page

Home  ›  Products  ›  Puncture Fixtures  ›  Geomembrane Index Puncture Fixture

UGC-PF-030 geomembrane index puncture fixture with 45 mm ring clamp and 8 mm probe for ASTM D4833 by Universal Grip
UGC-PF-030 geomembrane index puncture fixture with 45 mm ring clamp and 8 mm probe for ASTM D4833 by Universal Grip
UGC-PF-030 Geomembrane Index Puncture Fixture by Universal Grip, view 2
UGC-PF-030 Geomembrane Index Puncture Fixture by Universal Grip, view 3
UGC-PF-030 Geomembrane Index Puncture Fixture by Universal Grip, view 4

Geomembrane Index Puncture Fixture – ASTM D4833

Ring clamp with 45 mm opening and hardened 8 mm probe for index puncture tests on geomembranes and geosynthetics to ASTM D4833.

Brand: Universal Grip  |  Model: UGC-PF-030  |  ● Configured to order

  • Ring clamp with a 45 ± 0.025 mm (1.772 ± 0.001 in) inside diameter

  • Hardened flat-ended probe, Ø 8 ± 0.1 mm (0.315 ± 0.004 in)

  • 20 kN (4,496 lbf) or 50 kN (11,240 lbf) rating, set by the coupling you choose

  • Light to handle: 3.3 kg lower part incl. adapter, 0.68 kg probe

  • Nickel-plated steel for corrosion resistance

  • Also used for GOST R 56586 and NF P 84-507 puncture tests

Standards: ASTM D4833  ·  GOST R 56586  ·  NF P 84-507

Trusted by Global Companies

Index puncture fixture for geomembranes and geosynthetics

The UGC-PF-030 is a ring clamp and probe set for the index puncture test on geomembranes, geotextiles and related products. It is dimensioned for ASTM D4833 and is also used for tests to GOST R 56586 and NF P 84-507. Geosynthetics manufacturers, liner QC labs and civil engineering test labs use it to compare products and to check production lots against a specified minimum puncture resistance. See our complete ASTM D4833 guide for specimen preparation, procedure and calculations.

 

How it works

The specimen is clamped between two rings with an inside diameter of 45 ± 0.025 mm (1.772 ± 0.001 in) and an outside diameter of 100 mm (3.937 in). A hardened, flat-ended probe of Ø 8 ± 0.1 mm (0.315 ± 0.004 in), driven by the crosshead, pushes through the center of the clamped area. The maximum force before the probe breaks through is recorded as the index puncture resistance. Pre-cutting bolt holes in the specimen is recommended, so slick membranes are held positively in the clamp and cannot draw in under load.

 

Two load ratings

The rating follows the coupling you select:

  • 20 kN (4,496 lbf) with a female clevis of Ø 15.9 mm (5/8 in) or Ø 20 mm

  • 50 kN (11,240 lbf) with a female clevis of Ø 31.8 mm (1-1/4 in)

Other couplings are available through adapters. The lower part weighs 3.3 kg (7.3 lb) including its adapter and the probe 0.68 kg (1.5 lb), so the fixture goes on and off the machine quickly between test programs. Nickel-plated steel resists corrosion, and the standard temperature range is 0 to +70 °C (32 to 158 °F), with other ranges on request.

 

Typical applications

  • Geomembranes and liners

  • Geotextiles and geosynthetics

  • Landfill and civil engineering projects

  • Roofing membranes

 

Machine fit

The 20 kN version pairs naturally with a Galdabini 25 kN benchtop UTM; choose the 50 kN version for a 50 kN or 100 kN frame when you test thick or reinforced products. For the larger CBR-style static puncture test on geotextiles, see the UGC-PF-050 geotextile static puncture fixture. The full range is on our puncture fixtures page.

Tell us your machine coupling and any special temperature range, and we will configure the fixture: request a quote.

ASTM D4833 index puncture test

At a glance

  • Test type: Index puncture

  • Max. load: 20 kN (Ø 15.9 or 20 mm clevis); 50 kN (Ø 31.8 mm clevis)

  • Clamping ring: Inside Ø 45 ± 0.025 mm (1.772 ± 0.001 in), outside Ø 100 mm (3.937 in)

  • Probe: Ø 8 ± 0.1 mm (0.315 ± 0.004 in), hardened

  • Coupling: Female clevis Ø 15.9 mm (5/8 in), Ø 20 mm or Ø 31.8 mm (1-1/4 in); others via adapter

  • Material: Steel, nickel-plated

Geomembrane Index Puncture Fixture Specifications

TEST TYPE

Index puncture

 

MAX. LOAD

20 kN (Ø 15.9 or 20 mm clevis); 50 kN (Ø 31.8 mm clevis)

 

CLAMPING RING

Inside Ø 45 ± 0.025 mm (1.772 ± 0.001 in), outside Ø 100 mm (3.937 in)

 

PROBE

Ø 8 ± 0.1 mm (0.315 ± 0.004 in), hardened

 

COUPLING

Female clevis Ø 15.9 mm (5/8 in), Ø 20 mm or Ø 31.8 mm (1-1/4 in); others via adapter

 

MATERIAL

Steel, nickel-plated

 

TEMPERATURE RANGE

0 to +70 °C (others on request)

 

WEIGHT

3.3 kg lower part incl. adapter; 0.68 kg probe

 

SCOPE OF SUPPLY

1 fixture incl. probe

 

DRAWINGS

Dimensional drawings on data sheet; certified drawings and 3D models on request

 

PART REF.

UGC-PF-030

 

Models & Options

  • 20 kN version — Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm (Specify at order)

  • 50 kN version — Female clevis Ø 31.8 mm (1-1/4 in) (Specify at order)

  • Other couplings — Connection to non-standard machines via adapter (On request)

  • Special temperature range — Beyond 0 to +70 °C (On request)

What's Included

  • 1 fixture: upper and lower clamping rings with adapter

  • Hardened Ø 8 mm probe

  • Coupling per the version ordered (20 kN or 50 kN)

Supported Test Standards

  • ASTM D4833 — Index puncture resistance of geomembranes and related products

  • GOST R 56586 — Geomembrane puncture resistance (Russian national method)

  • NF P 84-507 — Geomembrane puncture resistance (French national method)

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-PF-050 Geotextile Static Puncture Fixture

UGC-PF-050 Geotextile Static Puncture Fixture

50 kN CBR-type static puncture fixture with sample positioning tool for geotextiles and geogrids, used for ASTM D6241 an

UGC-PF-020 Bi-Metal Coin Core Push-Out Fixture

UGC-PF-020 Bi-Metal Coin Core Push-Out Fixture

Compression fixture that punches the center pill out of a bi-metal coin or token and records the push-out shear force ho

UGC-PF-040 Dental Ceramic Biaxial Flexure Fixture ISO 6872

UGC-PF-040 Dental Ceramic Biaxial Flexure Fixture ISO 6872

Piston-on-three-balls fixture with tungsten carbide piston for biaxial flexural strength of dental ceramic discs to ISO

UGC-PF-010 Textile Elasticity Fixture ISO 20932-2

UGC-PF-010 Textile Elasticity Fixture ISO 20932-2

Ring clamp and hemispherical probe that stretch a clamped fabric in every direction at once to measure multiaxial elasti

Geomembrane Index Puncture Fixture FAQ

Which test is the UGC-PF-030 for?

The index puncture test on geomembranes and related products, with the 45 mm ring opening and 8 mm probe used in ASTM D4833. Our ASTM D4833 guide covers specimens, procedure and calculations.

 

Is it 20 kN or 50 kN?

Both are available. The rating follows the coupling: 20 kN with a Ø 15.9 mm or Ø 20 mm clevis, 50 kN with a Ø 31.8 mm clevis.

 

How do I stop the geomembrane slipping in the clamp?

Pre-cut bolt holes in the specimen so it is held positively between the rings; this is recommended on the data sheet.

 

Can it be used for other national standards?

Yes. It is also used for puncture tests to GOST R 56586 and NF P 84-507.

 

What temperature range does it cover?

0 to +70 °C (32 to 158 °F) as standard; other ranges are available on request.

 

What is the difference from the UGC-PF-050?

The PF-030 is a small-probe index test. The UGC-PF-050 runs the larger CBR-style static puncture test on geotextiles at up to 50 kN.

 

Need help configuring a puncture fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page