Home › Products › Puncture Fixtures › Geotextile Static Puncture Fixture





Geotextile Static Puncture Fixture – CBR, 50 kN
50 kN CBR-type static puncture fixture with sample positioning tool for geotextiles and geogrids, used for ASTM D6241 and ISO 12236 tests.
Brand: Universal Grip | Model: UGC-PF-050 | ● Configured to order
50 kN (11,240 lbf) capacity for strong geotextiles and geogrids
Hardened nickel-plated steel plunger, or stainless steel plunger for ISO 12236
Sample positioning tool supplied for consistent specimen placement
Optional hydraulic clamping unit: 100 kN clamping force, 9 mm clamp travel
Nickel-plated steel body for corrosion resistance
Also used for GOST 56335 static puncture tests
Standards: ASTM D6241 · ISO 12236 · GOST 56335
Trusted by Global Companies


























CBR static puncture fixture for geotextiles
The UGC-PF-050 is a 50 kN (11,240 lbf) static puncture fixture for geotextiles and related products. It is used for tests to ASTM D6241 and GOST 56335, and the stainless steel plunger version is also used for DIN EN ISO 12236. The static, or CBR-type, puncture test measures how a geotextile resists a blunt object pressed into it, the way a stone in fill loads the fabric beneath it. Geotextile and geogrid manufacturers, geosynthetic clay liner producers and road and civil engineering labs use the result for product data sheets and site acceptance. See our complete ASTM D6241 guide and ISO 12236 guide for specimen preparation, procedure and calculations.
How it works
The specimen is clamped in a ring holder, and a flat-ended plunger driven by the crosshead pushes through its center. Force and displacement are recorded until the plunger punctures the specimen. A sample positioning tool is supplied with the fixture so each specimen goes into the holder centered and in the same orientation, which keeps scatter down when several operators share the test.
Plunger and clamping options
Steel plunger: hardened and nickel-plated, for ASTM D6241 and GOST 56335
Stainless steel plunger: adds DIN EN ISO 12236
Hydraulic clamping unit: 100 kN (22,480 lbf) clamping force with 9 mm (0.35 in) clamp travel, for ISO 12236 tests on products that are hard to hold
Strong woven geotextiles and geogrids can pull in from the clamp before they puncture. The hydraulic clamping unit applies a high, repeatable clamping force so the measured strength belongs to the material, not to the grip.
Construction
The body is nickel-plated steel for corrosion resistance. The fixture weighs 19 kg (41.9 lb) including plunger and positioning tool, so plan for two-handed handling when fitting it. The standard temperature range is 0 to +70 °C (32 to 158 °F), with others on request.
Typical applications
Geotextiles and geogrids
Geosynthetic clay liners
Civil and road construction
Nonwoven quality control
Machine fit
At 50 kN, the fixture belongs on a Galdabini 50 kN or 100 kN benchtop UTM, or on a floor-standing frame. The standard coupling is a female clevis with a Ø 15.9 mm (5/8 in) pin; others are on request or via adapters. For the small-probe index test on geomembranes, see the UGC-PF-030.
Tell us the plunger material, whether you need hydraulic clamping and your machine coupling, and we will configure the fixture: request a quote.
ASTM D6241 CBR static puncture test
At a glance
Max. load: 50 kN
Test type: Static (CBR) puncture
Plunger: Steel, hardened and nickel-plated, or stainless steel
Coupling: Female clevis, Ø 15.9 mm (5/8 in) pin; others on request
Body: Steel, nickel-plated
Optional clamping: Hydraulic clamping unit, 100 kN clamping force, 9 mm clamp travel
Geotextile Static Puncture Fixture Specifications
MAX. LOAD
50 kN
TEST TYPE
Static (CBR) puncture
PLUNGER
Steel, hardened and nickel-plated, or stainless steel
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin; others on request
BODY
Steel, nickel-plated
OPTIONAL CLAMPING
Hydraulic clamping unit, 100 kN clamping force, 9 mm clamp travel
TEMPERATURE RANGE
0 to +70 °C (others on request)
WEIGHT
19 kg incl. plunger and positioning tool
SCOPE OF SUPPLY
1 fixture incl. sample positioning tool
DRAWINGS
Dimensional drawings on data sheet; certified drawings and 3D models on request
PART REF.
UGC-PF-050
Models & Options
Steel plunger — Hardened, nickel-plated; for ASTM D6241 and GOST 56335 (Specify at order)
Stainless steel plunger — Adds use for DIN EN ISO 12236 (Specify at order)
Hydraulic clamping unit — 100 kN clamping force, 9 mm clamp travel, for ISO 12236 (On request)
Machine coupling — Female clevis Ø 15.9 mm standard; others (On request)
What's Included
1 static puncture fixture with ring holder
Plunger in the material ordered (steel or stainless steel)
Sample positioning tool
Hydraulic clamping unit only if ordered as an option
Supported Test Standards
ASTM D6241 — Static puncture strength of geotextiles and geotextile-related products
ISO 12236 — Geosynthetics, static puncture test (CBR test)
GOST 56335 — Geotextile static puncture (Russian national method)
Compatible Grips & Fixtures
50 kN Benchtop UTM — Galdabini frame matched to the fixture rating
100 kN Benchtop UTM — Headroom for strong geogrids
UGC-PF-030 Geomembrane Index Puncture Fixture — Small-probe index puncture
Puncture Testing — Puncture and burst test setups
Adapters — Couplings for other machine connections
“Customer quote”
Related Equipment
UGC-PF-030 Geomembrane Index Puncture Fixture
Ring clamp with 45 mm opening and hardened 8 mm probe for index puncture tests on geomembranes and geosynthetics to ASTM
UGC-PF-040 Dental Ceramic Biaxial Flexure Fixture ISO 6872
Piston-on-three-balls fixture with tungsten carbide piston for biaxial flexural strength of dental ceramic discs to ISO
UGC-PF-060 Ball Burst Puncture Fixture ISO 9073-5
Ring clamp with 44.45 mm opening and 25.4 mm ball probe for bursting strength of knits, nonwovens and coated fabrics, ra
UGC-PF-070 Leather Ball Burst Fixture ISO 3379
Compact 2 kN ball burst fixture that records distension at grain crack and at burst, showing whether leather will surviv
Geotextile Static Puncture Fixture FAQ
Which tests is this fixture used for?
Static (CBR) puncture tests on geotextiles to ASTM D6241 and GOST 56335, and to ISO 12236 with the stainless steel plunger. Our ASTM D6241 guide and ISO 12236 guide cover the procedures.
What is the capacity?
50 kN (11,240 lbf).
Which plunger do I need?
The hardened, nickel-plated steel plunger covers ASTM D6241 and GOST 56335. Choose the stainless steel plunger if you also test to DIN EN ISO 12236.
When is the hydraulic clamping unit worth adding?
For strong geotextiles and geogrids that pull in from the clamp. It applies 100 kN clamping force with 9 mm clamp travel.
What is the sample positioning tool for?
It places every specimen centered and in the same orientation, which improves repeatability between operators.
How heavy is it?
19 kg (41.9 lb) including plunger and positioning tool.




