Home › Products › Puncture Fixtures › Leather Ball Burst Fixture ISO 3379





Leather Ball Burst Fixture ISO 3379
Compact 2 kN ball burst fixture that records distension at grain crack and at burst, showing whether leather will survive lasting, to ISO 3379.
Brand: Universal Grip | Model: UGC-PF-070 | ● Configured to order
Set up for the DIN EN ISO 3379 leather distension test
Ball probe hardened to 58 HRC, nickel-plated
Gives distension at grain crack and at burst from one test
2 kN (450 lbf) capacity, matched to leather forces
1.7 kg (3.7 lb) including probe; easy to mount and remove
Probe has its own clevis coupling; Ø 15.9 mm (5/8 in) pin standard
Standards: ISO 3379
Trusted by Global Companies


























Ball burst fixture for leather distension and grain strength
The UGC-PF-070 measures how far leather can be stretched before its grain surface cracks and before it bursts, according to DIN EN ISO 3379. In shoe manufacture the upper is pulled hard over the last, and leather that cracks at the grain during lasting is scrap. Tanneries, footwear makers, leather goods manufacturers and synthetic leather producers use the test to judge whether a hide or a lot is fit for lasting before it reaches the factory floor.
How it works
The leather specimen is clamped in the fixture body, and a hardened ball probe on the crosshead pushes into it. Force and displacement are recorded throughout. The displacement at which the grain first cracks is the distension at grain crack; the displacement and force at which the specimen finally bursts complete the result. Because both values come from one specimen, you see the margin between surface damage and outright failure, which is often what decides whether a leather is suitable for a given shoe style.
Construction
The probe is nickel-plated steel hardened to 58 HRC, so its ball surface does not flatten or scuff with repeated tests on stiff or heavily finished leather. It is supplied with its own clevis coupling, making it simple to swap in and out of the crosshead. The body is nickel-plated steel as well, and the complete fixture weighs only 1.7 kg (3.7 lb) including the probe. The 2 kN (450 lbf) rating is set for leather work. The standard connection is a female clevis with a Ø 15.9 mm (5/8 in) pin; other couplings are on request or through adapters. The standard temperature range is 0 to +70 °C (32 to 158 °F), with others on request.
Typical applications
Shoe upper leather
Leather goods
Tannery quality control
Synthetic leather
Machine fit
A 2 kN fixture is well within the range of a Mark-10 F-series motorized tensile tester (100 to 1,500 lbF), which makes it a practical choice for a tannery or footwear QC bench. If your lab also runs tensile and tear tests on leather, a Galdabini 2.5 kN or 5 kN benchtop UTM covers this fixture and those grips on one frame. For textiles and nonwovens, the UGC-PF-060 ball burst fixture runs the comparable test at higher loads. More options are on our puncture fixtures page.
Tell us your machine coupling and any special temperature range, and we will configure the fixture: request a quote.
Leather Ball Burst Fixture ISO 3379 Specifications
MAX. LOAD
2 kN
TEST TYPE
Ball burst / distension
PROBE
Steel, nickel-plated, hardened 58 HRC
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin; others on request
BODY
Steel, nickel-plated
TEMPERATURE RANGE
0 to +70 °C (others on request)
WEIGHT
1.7 kg incl. probe
SCOPE OF SUPPLY
1 fixture incl. probe
DRAWINGS
Dimensional drawings on data sheet; certified drawings and 3D models on request
PART REF.
UGC-PF-070
Models & Options
Machine coupling — Female clevis Ø 15.9 mm standard; other couplings (Specify at order)
Special temperature range — Beyond 0 to +70 °C (On request)
Coupling adapters — For machines with a different connection (On request)
What's Included
1 leather ball burst fixture body with specimen clamp
Hardened ball probe with its own clevis coupling
Supported Test Standards
ISO 3379 — Leather, determination of distension and strength of surface (ball burst method)
Compatible Grips & Fixtures
Motorized Tensile Testers — Mark-10 F-series frames that cover the 2 kN rating
2.5 kN Benchtop UTM — Galdabini frame for leather burst, tensile and tear
UGC-PF-060 Ball Burst Puncture Fixture — Ball burst for textiles and nonwovens
Tear Testing — Tear setups often run alongside leather burst tests
Adapters — Couplings for other machine connections
“Customer quote”
Related Equipment
UGC-PF-060 Ball Burst Puncture Fixture ISO 9073-5
Ring clamp with 44.45 mm opening and 25.4 mm ball probe for bursting strength of knits, nonwovens and coated fabrics, ra
UGC-PF-080 Packaging Puncture Resistance Fixture EN 14477
Needle puncture fixture with interchangeable 0.8 mm round or 3 mm flat needles for packaging films, pouches and laminate
UGC-PF-050 Geotextile Static Puncture Fixture
50 kN CBR-type static puncture fixture with sample positioning tool for geotextiles and geogrids, used for ASTM D6241 an
UGC-PF-090 Small Sample Slow Rate Penetration Fixture
Manually clamped film penetration fixture based on ASTM F1306, sized for strips up to 50 mm wide or discs up to 64 mm in
Leather Ball Burst Fixture ISO 3379 FAQ
What does ISO 3379 measure?
The distension and surface strength of leather: how far it stretches under a ball before the grain cracks and before it bursts.
Why do shoe manufacturers use this test?
It shows whether a leather can survive lasting, where the upper is stretched hard over the last, without cracking at the grain.
What is the capacity?
2 kN (450 lbf).
How hard is the ball probe?
The nickel-plated steel probe is hardened to 58 HRC, so it keeps its surface over repeated tests.
Which tester can I use?
A Mark-10 F-series motorized tester covers the full 2 kN rating; a Galdabini 2.5 kN benchtop UTM also fits.
How heavy is it?
1.7 kg (3.7 lb) including the probe.




