top of page

Home  ›  Products  ›  Puncture Fixtures  ›  Pneumatic Barrier Film Penetration Fixture

UGC-PF-100 pneumatic barrier film penetration fixture for ASTM F1306 by Universal Grip
UGC-PF-100 pneumatic barrier film penetration fixture for ASTM F1306 by Universal Grip
UGC-PF-100 Pneumatic Barrier Film Penetration Fixture by Universal Grip, view 2
UGC-PF-100 Pneumatic Barrier Film Penetration Fixture by Universal Grip, view 3
UGC-PF-100 Pneumatic Barrier Film Penetration Fixture by Universal Grip, view 4

Pneumatic Barrier Film Penetration Fixture – ASTM F1306

Pneumatically clamped fixture for ASTM F1306 slow rate penetration of barrier films, with 5 kN clamping at 7 bar for slip-free, repeatable tests.

Brand: Universal Grip  |  Model: UGC-PF-100  |  ● Configured to order

  • Pneumatic clamping: 5 kN (1,124 lbf) at 7 bar, 9 kN at 12 bar

  • Ø 35 mm (1.375 in) specimen opening, 1.6 mm (0.06 in) probe tip radius

  • Clamping force does not depend on the operator

  • Max. vertical test load 3 kN (674 lbf)

  • EN 14477 and large-opening (Ø 45 mm) versions available

  • Nickel-plated steel, 5.2 kg (11.5 lb)

Standards: ASTM F1306  ·  EN 14477

Trusted by Global Companies

Pneumatic penetration fixture for flexible barrier films

The UGC-PF-100 measures the slow rate penetration resistance of flexible barrier films and laminates according to ASTM F1306. Food and medical packaging labs, film producers and pouch converters use the test to show how well a structure resists being pierced by a slowly advancing point, such as a sharp edge of the product pressing outward. In this test, film slipping in the clamp is the most common source of scatter, and the PF-100 tackles it with pneumatic clamping. See our complete ASTM F1306 guide for specimen preparation, procedure and calculations.

 

How it works

A pneumatic cylinder clamps the film over a Ø 35 mm (1.375 in) opening with 5 kN (1,124 lbf) at 7 bar (102 psi), or up to 9 kN (2,023 lbf) at 12 bar (174 psi). A probe with a 1.6 mm (0.06 in) tip radius then penetrates the film at a controlled speed, and the machine records force and displacement to penetration. The clamping force is set by air pressure, not by how hard an operator turns a handle, so it stays the same from specimen to specimen and from shift to shift. The maximum vertical (test) load on the fixture is 3 kN (674 lbf), which is separate from the clamping force.

 

Versions

  • ASTM F1306: Ø 35 mm opening, 1.6 mm probe radius

  • EN 14477: Ø 10 mm opening, clamping 5 kN at 7 bar (11 kN, or 2,473 lbf, at 16 bar / 232 psi)

  • Large opening: Ø 45 mm ring, 2 mm probe radius

When you order, tell us the standard and opening size, the air pressure available in your lab and your machine coupling. The standard connection is a female clevis with a Ø 15.9 mm (5/8 in) pin; others are on request or via adapters. The fixture is nickel-plated steel, weighs 5.2 kg (11.5 lb) and covers 0 to +70 °C (32 to 158 °F) as standard.

 

Typical applications

  • Barrier films and laminates

  • Food and medical packaging

  • Flexible pouches

  • Film quality control

 

Machine fit

With a 3 kN vertical rating, the fixture suits a Mark-10 F-series motorized tester (up to 1,500 lbF) or a Galdabini 5 kN benchtop UTM. For small samples without an air supply, the UGC-PF-090 uses the same opening and probe radius with a manual clamp; for needle puncture to EN 14477, see the UGC-PF-080. Other pneumatic setups are on our pneumatic grips page.

Tell us your standard, opening size, air pressure and machine coupling, and we will configure the fixture: request a quote.

Product video

At a glance

  • Max. vertical load: 3 kN

  • Clamping force: 5 kN at 7 bar (9 kN at 12 bar)

  • Test type: Slow rate penetration

  • Specimen opening: Ø 35 mm (1.375 in)

  • Probe: Tip radius 1.6 mm (0.06 in)

  • Operation: Pneumatic clamping

Pneumatic Barrier Film Penetration Fixture Specifications

MAX. VERTICAL LOAD

3 kN

 

CLAMPING FORCE

5 kN at 7 bar (9 kN at 12 bar)

 

TEST TYPE

Slow rate penetration

 

SPECIMEN OPENING

Ø 35 mm (1.375 in)

 

PROBE

Tip radius 1.6 mm (0.06 in)

 

OPERATION

Pneumatic clamping

 

COUPLING

Female clevis, Ø 15.9 mm (5/8 in) pin; others on request

 

MATERIAL

Steel, nickel-plated

 

TEMPERATURE RANGE

0 to +70 °C (others on request)

 

WEIGHT

5.2 kg

 

DRAWINGS

Dimensional drawings on data sheet; certified drawings and 3D models on request

 

PART REF.

UGC-PF-100

 

Models & Options

  • ASTM F1306 version — Ø 35 mm opening, 1.6 mm probe radius (Specify at order)

  • EN 14477 version — Ø 10 mm opening, clamping 5 kN at 7 bar (11 kN at 16 bar) (Specify at order)

  • Large opening version — Ø 45 mm ring, 2 mm probe radius (Specify at order)

  • Machine coupling — Female clevis Ø 15.9 mm standard; others (On request)

What's Included

  • 1 pneumatic penetration fixture with clamping cylinder

  • Specimen opening and probe for the version ordered

  • Compressed air supply: specify the pressure available in your lab at order

Supported Test Standards

  • ASTM F1306 — Slow rate penetration resistance of flexible barrier films and laminates

  • EN 14477 — Packaging, flexible packaging material, puncture resistance (version)

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-PF-080 Packaging Puncture Resistance Fixture EN 14477

UGC-PF-080 Packaging Puncture Resistance Fixture EN 14477

Needle puncture fixture with interchangeable 0.8 mm round or 3 mm flat needles for packaging films, pouches and laminate

UGC-PF-090 Small Sample Slow Rate Penetration Fixture

UGC-PF-090 Small Sample Slow Rate Penetration Fixture

Manually clamped film penetration fixture based on ASTM F1306, sized for strips up to 50 mm wide or discs up to 64 mm in

UGC-PF-110 Tissue Paper Ball Burst Fixture ISO 12625-9

UGC-PF-110 Tissue Paper Ball Burst Fixture ISO 12625-9

Stainless steel ball burst fixture with water tray for dry and wet tissue, pneumatic (500 N) or manual (10 kN) clamping,

UGC-PF-120 Fabric Stiffness Puncture Fixture

UGC-PF-120 Fabric Stiffness Puncture Fixture

Circular bend fixture with 38.1 mm orifice and 25.4 mm flat plunger that measures fabric stiffness in all directions at

Pneumatic Barrier Film Penetration Fixture FAQ

Which standard is the UGC-PF-100 for?

ASTM F1306 slow rate penetration of flexible barrier films and laminates. Our ASTM F1306 guide covers specimens, procedure and calculations.

 

Why pneumatic clamping?

Air pressure sets the clamping force, so it is the same for every specimen and every operator, which cuts scatter from film slipping in the clamp.

 

How much clamping force does it apply?

5 kN at 7 bar (1,124 lbf at 102 psi), or up to 9 kN at 12 bar (174 psi).

 

What is the maximum test load?

3 kN (674 lbf) vertical load, separate from the clamping force.

 

Are other openings available?

Yes: an EN 14477 version with a Ø 10 mm opening and a large-opening version with a Ø 45 mm ring and 2 mm probe radius.

 

What do I need to tell you to order?

The standard and opening size, the air pressure available in your lab and your machine coupling.

 

Need help configuring a puncture fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page