Home › Products › Puncture Fixtures › Shade Net Ball Burst Fixture





Shade Net Ball Burst Fixture – 50 mm Ball, 102 mm Opening
Ball burst fixture for HDPE woven shade nets: a Ø 50 mm plastic ball pushes through net clamped over a Ø 102 mm opening by four toggle clamps.
Brand: Universal Grip | Model: UGC-PF-200 | ● Configured to order
Ø 50 mm (1.97 in) plastic ball probe sized for open net structures
Specimen holder with Ø 102 mm (4.0 in) opening
Four toggle clamps for fast specimen changes
146 mm holder height leaves room for full probe travel
Takes net specimens of at least Ø 150 mm (5.9 in)
Steel, aluminum and plastic build; 5/8 in clevis coupling
Downloads and standards
Trusted by Global Companies


























Ball burst fixture for shade nets and woven HDPE netting
The UGC-PF-200 is a ball burst fixture built for open, woven nets rather than fabrics or films. Agricultural shade nets, insect and hail nets and similar HDPE products have large openings and coarse tapes, so they need a bigger ball and a wider clamp than a textile burst fixture provides. Net producers and growers' suppliers use it to check burst resistance on production lots and to compare net constructions.
How it works
A net specimen at least Ø 150 mm (5.9 in) across is laid over the holder and locked down by four toggle clamps around a Ø 102 mm (4.0 in) opening. A Ø 50 mm (1.97 in) plastic ball on the upper adapter is driven down through the centre. The net stretches, the tapes take load, and eventually the structure ruptures. The maximum force and the displacement at that point describe the burst resistance of the net. The holder stands 146 mm (5.75 in) high, so the ball can travel well below the clamping plane before the net fails.
Why a large plastic ball
A small steel ball can slip between the tapes of an open net and measure a single strand instead of the net. The Ø 50 mm ball spans several openings at once, so the test loads the net as a structure. The plastic ball surface also avoids cutting HDPE tapes at the contact point.
Typical applications
Agricultural shade nets
HDPE woven nets
Insect and hail nets
Geonets and meshes
For ball burst tests on nonwovens, leather or tissue paper, see the other ball burst fixtures in our puncture fixtures range.
Machine fit
The maximum load is confirmed on request to your expected burst force. Lighter shade nets are often tested on a Mark-10 motorized tester from our tensile testers range; heavier nets and long probe travel suit a Galdabini 5 kN benchtop UTM. The fixture uses a female clevis for a Ø 15.9 mm (5/8 in) pin, and adapters are available for other couplings. Related grips for net tensile tests are on our textiles page.
Tell us your net type and specimen size, expected burst force and machine coupling, and we will quote the fixture.
Shade Net Ball Burst Fixture Specifications
TEST TYPE
Ball burst
SPECIMEN
Shade nets, HDPE woven nets, min. Ø 150 mm
BALL PROBE
Ø 50 mm, plastic
OPENING
Ø 102 mm
HOLDER HEIGHT
146 mm
CLAMPING
4 toggle clamps
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin
MATERIAL
Steel, aluminum, plastic
MAX. LOAD
On request
DRAWINGS
Dimensional drawings and 3D models on request
PART REF.
UGC-PF-200
Models & Options
Machine coupling — 5/8 in clevis standard; other couplings to your frame (Specify at order)
Coupling adapters — For machines without a 5/8 in clevis (On request)
What's Included
Specimen holder with Ø 102 mm opening, 146 mm high
Four toggle clamps
Upper probe with Ø 50 mm plastic ball
Female clevis coupling for a Ø 15.9 mm (5/8 in) pin
Supported Test Standards
Standards list
Compatible Grips & Fixtures
5 kN Benchtop UTM — Galdabini frame for heavier nets
Tensile Testers — Mark-10 motorized testers for lighter nets
Textiles Testing — Grips and fixtures for nets and fabrics
Adapters — Couplings for other machine connections
Puncture Testing — Puncture and burst setups
“Customer quote”
Related Equipment
UGC-PF-190 Fabric Stiffness Puncture Fixture Similar Method
Open-frame circular bend fixture for comparative fabric stiffness checks by a method similar to ASTM D4032, with orifice
UGC-PF-210 Tape Puncture Resistance Fixture
Puncture resistance fixture for pressure-sensitive adhesive tapes, configured to ASTM D1000 Figure 9 for electrical insu
UGC-PF-180 Foot and Leg Protector Puncture Fixture ISO 20344
Nail puncture fixture for safety footwear soles and penetration-resistant inserts, with Ø 3 mm and Ø 4.5 mm test nails f
UGC-PF-220 Glass Puncture Fixture and Cold Chamber Jaws
Glass puncture fixture with a 500 mm long Ø 12.7 mm punch and adjustable 25 to 50 mm holder; blank-jaw version runs in a
Shade Net Ball Burst Fixture FAQ
What does the UGC-PF-200 test?
The ball burst resistance of shade nets and other woven HDPE nets, reported as maximum force and displacement.
What size is the ball and opening?
A Ø 50 mm plastic ball pushes through a Ø 102 mm opening.
How big must the specimen be?
At least Ø 150 mm, so the four toggle clamps have material to hold.
What is the maximum load?
Confirmed on request to the burst force you expect.
Which machine does it fit?
It has a female clevis for a Ø 15.9 mm (5/8 in) pin; Mark-10 tensile testers and Galdabini benchtop UTMs both work, with adapters as needed.
Can it test insect and hail nets?
Yes. Insect and hail nets, geonets and meshes are typical specimens alongside shade nets.




