top of page

Home  ›  Products  ›  Puncture Fixtures  ›  Glass Puncture Fixture and Cold Chamber Jaws

UGC-PF-220 glass puncture fixture with long punch and rubber-coated jaws by Universal Grip
UGC-PF-220 glass puncture fixture with long punch and rubber-coated jaws by Universal Grip
UGC-PF-220 Glass Puncture Fixture and Cold Chamber Jaws by Universal Grip, view 2
Product photo 3
Product photo 4

Glass Puncture Fixture and Cold Chamber Jaws – Ø 12.7 mm Punch

Glass puncture fixture with a 500 mm long Ø 12.7 mm punch and adjustable 25 to 50 mm holder; blank-jaw version runs in a chamber from -70 to +280 °C.

Brand: Universal Grip  |  Model: UGC-PF-220  |  ● Configured to order

  • Ø 12.7 mm (0.5 in) punch, 500 mm (19.7 in) long, reaches into a chamber

  • Specimen opening adjustable from Ø 25 to 50 mm (about 1 to 2 in)

  • Rubber-coated jaws protect glass edges from chipping

  • Blank-jaw version for -70 to +280 °C (-94 to 536 °F)

  • Stainless steel construction for chamber use

  • M6 threaded punch connection; holder with 16 mm male coupling

Downloads and standards

Trusted by Global Companies

Puncture fixture for glass, with a chamber-ready version

The UGC-PF-220 is built for puncture tests on glass specimens such as thin glass, display and cover glass, and glass vials or discs. Glass is unforgiving in a fixture: a hard clamp chips the edge and the specimen fails at the jaw instead of under the punch. This fixture uses rubber-coated jaws to hold the glass without edge damage, and a long punch so the same test can be run inside a temperature chamber.

 

How it works

The glass specimen is held in a holder whose opening adjusts from Ø 25 to 50 mm (about 1 to 2 in), so one holder covers a range of specimen sizes and spans. A Ø 12.7 mm (0.5 in) punch, 500 mm (19.7 in) long, is driven down through the centre of the opening while the testing machine records force and travel to fracture. The punch length lets the crosshead stay outside the chamber while the specimen sits inside at test temperature. Glass usually fails suddenly, so a clean fracture point on the force curve is the main result; holding the specimen evenly around the opening is what keeps that point repeatable from one specimen to the next.

 

Jaw versions

  • Rubber-coated jaws – standard version for room temperature testing of glass.

  • Blank jaws – metal jaws for use in a temperature chamber from -70 °C to +280 °C (-94 °F to 536 °F), where a rubber coating would not hold up.

All parts are stainless steel, which tolerates the condensation and thermal cycling that come with cold chamber work.

 

Typical applications

  • Thin glass

  • Display and cover glass

  • Glass vials and discs

  • Low-temperature puncture tests

 

Machine and chamber fit

The specimen holder has a 16 mm male coupling and the punch connects by an M6 thread. Maximum load is confirmed on request for your glass thickness. For tests at temperature, the fixture is designed to work with Galdabini benchtop UTMs fitted with one of our environmental chambers; adapters connect the holder and punch to your load cell and base. Other probe and ball geometries are on the puncture fixtures page.

Tell us your glass specimen size and thickness, test temperature and machine coupling, and we will quote the fixture.

Product video

At a glance

  • Test type: Puncture

  • Punch: Ø 12.7 mm, 500 mm long

  • Punch connection: M6 thread

  • Specimen opening: Adjustable, Ø 25-50 mm

  • Jaws: Rubber-coated (standard); blank (chamber version)

  • Temperature range: -70 to +280 °C (blank-jaw version)

Glass Puncture Fixture and Cold Chamber Jaws Specifications

TEST TYPE

Puncture

 

PUNCH

Ø 12.7 mm, 500 mm long

 

PUNCH CONNECTION

M6 thread

 

SPECIMEN OPENING

Adjustable, Ø 25-50 mm

 

JAWS

Rubber-coated (standard); blank (chamber version)

 

TEMPERATURE RANGE

-70 to +280 °C (blank-jaw version)

 

HOLDER COUPLING

Male coupling 16 mm

 

MATERIAL

Stainless steel

 

MAX. LOAD

On request

 

DRAWINGS

Dimensional drawings and 3D models on request

 

PART REF.

UGC-PF-220

 

Models & Options

  • Rubber-coated jaws — Room temperature testing of glass (Specify at order)

  • Blank jaws — Temperature chamber use, -70 to +280 °C (Specify at order)

  • Coupling adapters — Connect holder and M6 punch to your machine (On request)

What's Included

  • Punch Ø 12.7 mm, 500 mm long, with M6 thread connection

  • Specimen holder with adjustable Ø 25-50 mm opening and 16 mm male coupling

  • Jaws as ordered: rubber-coated or blank for chamber use

Supported Test Standards

Standards list

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-PF-210 Tape Puncture Resistance Fixture

UGC-PF-210 Tape Puncture Resistance Fixture

Puncture resistance fixture for pressure-sensitive adhesive tapes, configured to ASTM D1000 Figure 9 for electrical insu

UGC-PF-230 Sheet Metal Ball Punch Fixture ISO 8490

UGC-PF-230 Sheet Metal Ball Punch Fixture ISO 8490

Miniature ball punch deformation fixture for thin metal foil and sheet, based on the ASTM E643 and ISO 8490 test princip

UGC-PF-200 Shade Net Ball Burst Fixture

UGC-PF-200 Shade Net Ball Burst Fixture

Ball burst fixture for HDPE woven shade nets: a Ø 50 mm plastic ball pushes through net clamped over a Ø 102 mm opening

UGC-PF-190 Fabric Stiffness Puncture Fixture Similar Method

UGC-PF-190 Fabric Stiffness Puncture Fixture Similar Method

Open-frame circular bend fixture for comparative fabric stiffness checks by a method similar to ASTM D4032, with orifice

Glass Puncture Fixture and Cold Chamber Jaws FAQ

Why rubber-coated jaws?

They hold the glass without chipping its edges, so the specimen fails under the punch rather than at the clamp.

 

Can I test inside a temperature chamber?

Yes. The blank-jaw version is rated from -70 °C to +280 °C, and the 500 mm punch reaches into an environmental chamber.

 

What specimen sizes does it take?

The holder opening adjusts from Ø 25 to 50 mm.

 

What are the punch dimensions?

Ø 12.7 mm, 500 mm long, with an M6 thread connection.

 

What is the maximum load?

Confirmed on request for your glass thickness and test.

 

How does it connect to my machine?

The holder has a 16 mm male coupling and the punch an M6 thread; adapters are available.

 

Need help configuring a puncture fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page