Home › Products › Puncture Fixtures › Foot and Leg Protector Puncture Fixture ISO 20344





Foot and Leg Protector Puncture Fixture ISO 20344
Nail puncture fixture for safety footwear soles and penetration-resistant inserts, with Ø 3 mm and Ø 4.5 mm test nails for ISO 20344 and ISO 22568 tests.
Brand: Universal Grip | Model: UGC-PF-180 | ● Configured to order
Used for tests such as ISO 20344, ISO 22568-3 and ISO 22568-4
Test nails of Ø 3 mm and Ø 4.5 mm supplied for the different methods
Base plate supports the sole or insert during piercing
Nickel-plated steel for corrosion resistance
Female clevis for a Ø 15.9 mm (5/8 in) or Ø 20 mm pin
For safety, protective and occupational footwear
Standards: ISO 20344 · ISO 22568-3 · ISO 22568-4
Trusted by Global Companies


























Nail puncture fixture for safety footwear and penetration-resistant inserts
The UGC-PF-180 checks whether a shoe sole or a penetration-resistant insert stops a nail. PPE certification labs and footwear manufacturers use it for tests such as ISO 20344 on complete soles and ISO 22568-3 and ISO 22568-4 on metallic and non-metallic inserts. One fixture covers both nail diameters the methods call for.
How it works
The sole or insert lies on a base plate that supports it around the test point. A test nail on the upper adapter is driven into it by the testing machine, and force is recorded as the nail loads and, if the material fails, penetrates. Two nails are supplied: Ø 3 mm (0.12 in) and Ø 4.5 mm (0.18 in). You fit the nail your method specifies and leave the base plate in place. Running the test in a testing machine rather than a simple press gives a full force-travel record, so you can see not only whether the nail broke through but how much force the sole or insert carried before it did. That record is useful evidence when a new sole compound or insert material is being qualified.
Versions
5/8 in clevis version – female clevis for a Ø 15.9 mm pin, supplied with Ø 3 mm and Ø 4.5 mm nails.
Ø 20 mm clevis version – the ISO 20344 configuration with a female clevis for a Ø 20 mm (0.79 in) pin.
Other couplings are handled with adapters. The body is nickel-plated steel, which holds up to the repeated nail loading and handling of a certification lab.
Typical applications
Safety footwear
Penetration-resistant inserts
Protective boots
PPE certification labs
Machine fit
The maximum load is confirmed at quote to the force your standard requires. Nail puncture of soles and inserts needs a stiff frame with enough capacity to drive the nail fully, so most labs run this fixture on a Galdabini 5 kN benchtop UTM or 10 kN benchtop UTM. A Mark-10 1,500 lbF motorized tester from our tensile testers range can also be considered once the required force is confirmed. See all puncture fixtures for probe and ball geometries for other PPE.
Tell us the standard and insert type, the nail diameters you need and your machine coupling, and we will configure and quote the fixture.
Foot and Leg Protector Puncture Fixture ISO 20344 Specifications
TEST TYPE
Nail puncture
TEST NAILS
Ø 3 mm and Ø 4.5 mm
SPECIMEN
Soles, penetration-resistant inserts
SPECIMEN SUPPORT
Base plate
COUPLING
Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm; others via adapter
MATERIAL
Steel, nickel-plated
MAX. LOAD
On request
TEMPERATURE RANGE
On request
DRAWINGS
Dimensional drawings and 3D models on request
PART REF.
UGC-PF-180
Models & Options
5/8 in clevis version — Female clevis for Ø 15.9 mm pin; Ø 3 mm and Ø 4.5 mm nails (Specify at order)
Ø 20 mm clevis version — ISO 20344 configuration with female clevis for Ø 20 mm pin (Specify at order)
Coupling adapters — For other machine connections (On request)
What's Included
Puncture fixture with base plate for soles and inserts
Test nails Ø 3 mm and Ø 4.5 mm
Female clevis coupling, Ø 15.9 mm (5/8 in) or Ø 20 mm pin as ordered
Supported Test Standards
ISO 20344 — Personal protective equipment: test methods for footwear
ISO 22568-3 — Foot and leg protectors: metallic penetration-resistant inserts
ISO 22568-4 — Foot and leg protectors: non-metallic penetration-resistant inserts
Compatible Grips & Fixtures
5 kN Benchtop UTM — Galdabini frame for footwear puncture tests
10 kN Benchtop UTM — Extra capacity for stiff soles and inserts
Tensile Testers — Mark-10 motorized testers up to 1,500 lbF
Adapters — Couplings for other machine connections
Puncture Testing — Puncture setups and fixtures
“Customer quote”
Related Equipment
UGC-PF-170 Food Packaging Foil Puncture Fixture JIS Z1707
Stainless steel needle puncture fixture for food packaging films to JIS Z 1707: a Ø 1 mm needle pierces film clamped ove
UGC-PF-190 Fabric Stiffness Puncture Fixture Similar Method
Open-frame circular bend fixture for comparative fabric stiffness checks by a method similar to ASTM D4032, with orifice
UGC-PF-160 Huber Needle Coring Fixture
Coring test fixture for non-coring Huber needles: the needle passes through a port septum and any cored fragments collec
UGC-PF-200 Shade Net Ball Burst Fixture
Ball burst fixture for HDPE woven shade nets: a Ø 50 mm plastic ball pushes through net clamped over a Ø 102 mm opening
Foot and Leg Protector Puncture Fixture ISO 20344 FAQ
Which standards is the UGC-PF-180 used for?
Tests such as ISO 20344 on footwear and ISO 22568-3 and ISO 22568-4 on metallic and non-metallic penetration-resistant inserts.
Which nails are supplied?
Test nails of Ø 3 mm and Ø 4.5 mm, for the different test methods.
What couplings are available?
A female clevis for a Ø 15.9 mm (5/8 in) pin or for a Ø 20 mm pin. Others are handled with adapters.
What is the maximum load?
Confirmed on request to the force your standard requires.
Which testing machine should I use?
Most labs use a Galdabini 5 kN or 10 kN benchtop UTM.
What is the fixture made of?
Nickel-plated steel.




