Home › Products › Puncture Fixtures › Sheet Metal Ball Punch Fixture ISO 8490





Sheet Metal Ball Punch Fixture ISO 8490 – Miniature 50 N
Miniature ball punch deformation fixture for thin metal foil and sheet, based on the ASTM E643 and ISO 8490 test principle and rated to 50 N.
Brand: Universal Grip | Model: UGC-PF-230 | ● Configured to order
Miniature ball punch fixture for thin metallic sheet and foil
Based on the ASTM E643 and ISO 8490 test principle
Compact two-part die clamped by four screws
Slender punch sized for small foil specimens
50 N (about 11 lbf) capacity matched to very thin foils
Stainless steel die body and punch; 5/8 in clevis coupling
Standards: ASTM E643 · ISO 8490
Trusted by Global Companies


























Miniature ball punch fixture for thin metal foils
The UGC-PF-230 scales the ball punch deformation test down to foils and very thin sheet. It follows the test principle of ASTM E643 and ISO 8490, where a punch stretches a clamped specimen into a dome until it fractures, but at a 50 N (about 11 lbf) rating suited to small specimens that a full-size cupping fixture would overwhelm. Battery, electronics and materials research labs use it to compare the formability of foils that are too thin or too small for standard tooling.
How it works
The foil specimen is clamped between the two halves of a compact stainless steel die body, which are pulled together by four screws so the specimen is gripped evenly around the test area. A slender punch on the upper adapter is driven into the specimen, stretching it into a dome until it cracks. The testing machine records force against punch travel; the travel at fracture indicates how far the foil can be stretched, and the force curve shows how it hardens on the way.
Full-size or miniature?
This is not a replacement for a full-size sheet metal cupping fixture. Its 50 N rating and small punch are chosen for foils and small samples. If you need the full specimen and punch dimensions of ASTM E643 or ISO 8490 on standard sheet thicknesses, ask us about a full-size build. Punch geometry and die dimensions for this fixture are confirmed on request.
Typical applications
Metal foils
Battery and electronics foils
Thin sheet formability
Materials research
Machine fit
A 50 N fixture belongs on a low-force frame with a matching load cell. A Mark-10 motorized tester such as the 100 lb tensile tester paired with a low-capacity force gauge gives the resolution thin foils need, and a Galdabini 2.5 kN benchtop UTM with a small load cell suits labs that also run foil tensile tests. The fixture has a female clevis for a Ø 15.9 mm (5/8 in) pin, with adapters for other couplings. More fixtures for sheet and foil are on our metals and puncture fixtures pages.
Tell us your specimen thickness and size, punch geometry and machine coupling, and we will quote the fixture.
Sheet Metal Ball Punch Fixture ISO 8490 Specifications
MAX. LOAD
50 N
TEST TYPE
Ball punch / cupping deformation
SPECIMEN
Thin metallic sheet and foil
CLAMPING
Two-part die, 4 screws
PUNCH
Slender punch for small foil specimens
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin
MATERIAL
Stainless steel (die body and punch)
DIMENSIONS
On request
DRAWINGS
Dimensional drawings and 3D models on request
PART REF.
UGC-PF-230
Models & Options
Punch geometry — Made to your specimen thickness and method (Specify at order)
Full-size build — Ball punch fixture at full ASTM E643 / ISO 8490 scale (On request)
Coupling adapters — For machines without a 5/8 in clevis (On request)
What's Included
Two-part stainless steel die body with four clamping screws
Slender stainless steel punch
Female clevis coupling for a Ø 15.9 mm (5/8 in) pin
Supported Test Standards
ASTM E643 — Ball punch deformation of metallic sheet material
ISO 8490 — Metallic sheet and strip: modified Erichsen cupping test
Compatible Grips & Fixtures
100 lb Tensile Tester — Mark-10 motorized tester for 50 N work
Force Gauges — Low-capacity gauges for foil-level forces
2.5 kN Benchtop UTM — Galdabini frame for foil testing
Metals Testing — Grips and fixtures for sheet and foil
Adapters — Couplings for other machine connections
“Customer quote”
Related Equipment
UGC-PF-220 Glass Puncture Fixture and Cold Chamber Jaws
Glass puncture fixture with a 500 mm long Ø 12.7 mm punch and adjustable 25 to 50 mm holder; blank-jaw version runs in a
UGC-PF-210 Tape Puncture Resistance Fixture
Puncture resistance fixture for pressure-sensitive adhesive tapes, configured to ASTM D1000 Figure 9 for electrical insu
UGC-PF-200 Shade Net Ball Burst Fixture
Ball burst fixture for HDPE woven shade nets: a Ø 50 mm plastic ball pushes through net clamped over a Ø 102 mm opening
UGC-PF-190 Fabric Stiffness Puncture Fixture Similar Method
Open-frame circular bend fixture for comparative fabric stiffness checks by a method similar to ASTM D4032, with orifice
Sheet Metal Ball Punch Fixture ISO 8490 FAQ
Is the UGC-PF-230 a full-size ASTM E643 fixture?
No. It is a miniature fixture based on the ASTM E643 and ISO 8490 test principle, rated to 50 N for thin foils and small specimens. Ask us about a full-size build.
What is the load capacity?
50 N, about 11 lbf.
How is the specimen clamped?
Between the two halves of a stainless steel die body, held together by four screws.
What materials can it test?
Thin metallic sheet and foil, including battery and electronics foils.
Which tester should I use?
A low-force setup such as a Mark-10 100 lb tensile tester with a low-capacity force gauge.
Are punch and die dimensions available?
Yes, on request with drawings and 3D models.




