top of page

Home  ›  Products  ›  Peel Fixtures  ›  T-Peel Fixture for Medical Packaging

UGC-PL-010 supported T-peel fixture for medical packaging seal strength tests by Universal Grip
UGC-PL-010 supported T-peel fixture for medical packaging seal strength tests by Universal Grip
UGC-PL-010 T-Peel Fixture for Medical Packaging by Universal Grip, view 2
UGC-PL-010 T-Peel Fixture for Medical Packaging by Universal Grip, view 3
UGC-PL-010 T-Peel Fixture for Medical Packaging by Universal Grip, view 4

T-Peel Fixture for Medical Packaging

Supported 90° T-peel fixture, rated to 100 N, that holds the specimen tail at 90° for seal strength tests on medical and flexible packaging.

Brand: Universal Grip  |  Model: UGC-PL-010  |  ● Configured to order

  • Holds the unseparated specimen tail at 90° to the pull for a consistent T-peel geometry

  • Rated to 100 N (about 22.5 lbf), in proportion to seal strength forces on pouches and lids

  • Fixed or adjustable unseparated specimen length, chosen by version

  • Works with small pneumatic or manual grips on the two specimen legs

  • Lightweight aluminum and steel construction keeps tare load low

  • Female clevis coupling with Ø 15.9 mm (5/8 in) pin; other couplings via adapters

Standards: ASTM F88  ·  ASTM F904  ·  ISO 11339  ·  ASTM D1876

Trusted by Global Companies

Supported T-peel fixture for medical packaging seal strength

The UGC-PL-010 is a T-peel fixture for measuring the seal strength of medical device pouches, lidding and other flexible packaging. It is built for packaging QC labs and medical device manufacturers who need seal strength values that repeat from specimen to specimen and from operator to operator. The fixture is rated to 100 N (about 22.5 lbf), which keeps it in proportion to the forces produced by heat seals on pouches, lids and flexible laminates.

 

How the supported T-peel works

In an unsupported T-peel, the unseparated tail of the strip is free to swing as the seal opens, so the angle at the peel front changes during the test. The UGC-PL-010 supports that tail at 90° to the direction of pull. The two legs of the specimen are clamped in upper and lower grips and pulled apart, while the support holds the seal opening at a defined geometry. The force curve then reflects the seal itself rather than how the strip happened to hang.

Aluminum and steel parts keep the fixture light, which matters when the full-scale force is 100 N or less and every gram of tare counts. It connects to the machine with a female clevis and Ø 15.9 mm (5/8 in) pin; other machine connections are handled with our adapters.

 

Fixed or adjustable tail length

  • Fixed tail length: the unseparated specimen length is set by the fixture, a good match for a lab that tests one strip format every day.

  • Adjustable tail length: the unseparated length can be changed to suit different pouch formats, seal widths or test methods on the same fixture.

 

Grips for the specimen legs

Upper and lower grips are ordered separately, so you can match them to your strip width and the way your operators work. The fixture is used with small pneumatic grips or manual vise grips. Tell us which you already have and we will confirm the fit.

 

Typical applications and standards

Typical specimens are medical device packaging, pouch and lid seals, flexible packaging laminates and adhesive bonds. The fixture is used for tests such as ASTM F88 and ASTM F904, EN 868-5 for medical packaging, and the T-peel methods ISO 11339 and ASTM D1876. See our complete ASTM F88 guide for specimen preparation, procedure and calculations. In this force range the fixture suits our 100 lb tensile tester or a Galdabini 2.5 kN benchtop universal testing machine.

Tell us your pouch or strip format, whether you need a fixed or adjustable tail length, your machine coupling and the grips you plan to use, and we will configure the fixture. Request a quote.

Pneumatic grip foot pedals

At a glance

  • Max. load: 100 N (approx. 22.5 lbf)

  • Test type: 90° supported T-peel

  • Specimen: Sealed flexible packaging strips

  • Unseparated length: Fixed or adjustable, by version

  • Coupling: Female clevis, Ø 15.9 mm (5/8 in) pin

  • Material: Aluminum and steel

T-Peel Fixture for Medical Packaging Specifications

MAX. LOAD

100 N (approx. 22.5 lbf)

 

TEST TYPE

90° supported T-peel

 

SPECIMEN

Sealed flexible packaging strips

 

UNSEPARATED LENGTH

Fixed or adjustable, by version

 

COUPLING

Female clevis, Ø 15.9 mm (5/8 in) pin

 

MATERIAL

Aluminum and steel

 

GRIPS

Upper and lower grips ordered separately

 

TEMPERATURE RANGE

Ambient

 

STANDARDS NAMED

ASTM F88, ASTM F904, EN 868-5, ISO 11339, ASTM D1876

 

DRAWINGS

Dimensional drawings and 3D models on request

 

PART REF.

UGC-PL-010

 

Models & Options

  • Fixed tail length — Unseparated specimen length fixed by the fixture (Specify at order)

  • Adjustable tail length — Unseparated specimen length adjustable to the specimen (Specify at order)

  • Specimen leg grips — Small pneumatic or manual grips for the upper and lower legs (On request)

  • Machine coupling — Other couplings and adapters in place of the Ø 15.9 mm clevis (On request)

What's Included

  • T-peel tail-support fixture in the version ordered (fixed or adjustable tail length)

  • Female clevis coupling with Ø 15.9 mm (5/8 in) pin

  • Upper and lower grips for the specimen legs are ordered separately

  • Dimensional drawings or 3D models available on request

Supported Test Standards

  • ASTM F88 — Seal strength of flexible barrier materials

  • ASTM F904 — Bond strength or ply adhesion of laminates made from flexible materials

  • ISO 11339 — T-peel test for flexible-to-flexible bonded assemblies

  • ASTM D1876 — Peel resistance of adhesives (T-peel test)

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-PL-060 Sachet Packaging Tear Grip

UGC-PL-060 Sachet Packaging Tear Grip

Pair of 20 N pincer grips that imitate finger action to measure the tear-open force of sachets with serrated or V-notch

UGC-PL-020 90 Degree Peel Accessory

UGC-PL-020 90 Degree Peel Accessory

Flat base plate fixture with a height-adjustable guide rod that holds the peel line while an upper grip pulls the free s

UGC-PL-030 Peel Test Table with Ball Guide

UGC-PL-030 Peel Test Table with Ball Guide

Low-friction peel table whose carriage runs on a recirculating ball guide and follows the peel front, keeping the peel a

UGC-PL-040 Yogurt Cup Peel Fixture

UGC-PL-040 Yogurt Cup Peel Fixture

Vacuum cup holder on a graduated tilting segment for lid peel and seal strength tests on yogurt cups and similar sealed

T-Peel Fixture for Medical Packaging FAQ

What does the UGC-PL-010 do during a T-peel test?

It supports the unseparated tail of the specimen at 90° to the direction of pull while the two legs are pulled apart by upper and lower grips. That keeps the peel geometry the same from strip to strip.

 

Which tests is it used for?

Seal strength tests such as ASTM F88 and ASTM F904, EN 868-5 for medical packaging, and T-peel tests such as ISO 11339 and ASTM D1876. Our ASTM F88 guide covers specimen preparation, procedure and calculations.

 

What is the maximum load?

100 N (about 22.5 lbf). Pair it with a load cell sized for low forces so weak seals still read well above the noise floor.

 

Should I choose the fixed or adjustable tail length version?

Choose the fixed version if you test one strip format. Choose the adjustable version if the unseparated length changes between pouch formats or methods.

 

Are the grips included?

No. Upper and lower grips are ordered separately; the fixture is used with small pneumatic grips or manual vise grips.

 

How does it mount on my testing machine?

With a female clevis and Ø 15.9 mm (5/8 in) pin. Other couplings are available through our adapters; contact us with your machine model.

 

Need help configuring a peel fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page