Home › Products › Peel Fixtures › Sachet Packaging Tear Grip





Sachet Packaging Tear Grip – Pincer Grips, 20 N
Pair of 20 N pincer grips that imitate finger action to measure the tear-open force of sachets with serrated or V-notch seals.
Brand: Universal Grip | Model: UGC-PL-060 | ● Configured to order
Pulling motion imitates the way fingers tear a sachet open
Made for sachets with serrated or V-notch seals
Small pincer jaws with knurled clamping screws hold each side at the notch
Low-mass aluminum and steel construction suited to small load cells
Rated to 20 N (about 4.5 lbf) for the low forces of single-dose packs
Operating range 0 to +70 °C (32 to 158 °F)
Downloads and standards
Trusted by Global Companies


























Tear-open grips for sachet packaging
The UGC-PL-060 is a pair of pincer grips for measuring the force needed to tear open a sachet. It is built for packaging engineers and QC labs in food, pharmaceutical and medical device production who need to check that single-dose sachets open easily for the user but stay closed through filling, handling and transport. The grips are rated to 20 N (about 4.5 lbf), which suits the low forces involved in opening single-dose packs.
How it works
Most sachets are opened by tearing from a serrated edge or a V-notch in the seal. The UGC-PL-060 reproduces that action. Each grip holds one side of the sachet at the notch between small pincer jaws, tightened with knurled clamping screws. When the testing machine moves, the opposing grips pull apart in a way that imitates the movement of human fingers, and the load cell records the force needed to start and propagate the tear.
Because the grips take hold right at the notch, the test isolates the tear-open behavior of the pack instead of stretching the whole sachet. That makes it easier to compare notch designs, film structures or seal settings against each other.
Construction
Low mass: aluminum and steel construction keeps the weight on the load cell small, which matters when the full-scale force is only 20 N.
Pincer jaws: small jaws with knurled screws clamp thin sachet films without needing tools.
Temperature: rated from 0 to +70 °C (32 to 158 °F).
Coupling: clevis pin coupling; other sizes through our adapters.
Typical applications
Food sachets, pharmaceutical sachets, medical device pouches and other single-dose packaging. Sachet tear-open sits naturally beside seal strength work, so labs using this grip often also run the UGC-PL-010 T-peel fixture on pouch seal strips or the UGC-PL-040 yogurt cup peel fixture on lidded containers. More packaging fixtures are on our food testing fixtures page, and tear methods are covered under tear testing.
Machine fit
At 20 N, the grips suit low-force frames such as our 100 lb tensile tester fitted with a low-capacity load cell, so the tear force reads well above the noise floor.
Tell us your sachet size, seal type and machine coupling, and we will set up the grips. Request a quote.
Sachet Packaging Tear Grip Specifications
MAX. LOAD
20 N (approx. 4.5 lbf)
TEST TYPE
Tear-open of sealed sachets
SPECIMEN
Sachets with serrated or V-notch seals
CLAMPING
Pincer jaws, knurled screw
SUPPLIED AS
Pair of pincer grips
MATERIAL
Aluminum and steel
TEMPERATURE RANGE
0 to +70 °C (32 to 158 °F)
COUPLING
Clevis pin coupling; other sizes via adapters
DRAWINGS
Dimensional drawings and 3D models on request
PART REF.
UGC-PL-060
Models & Options
Sachet size and seal type — Grips set up for your sachet format and serrated or V-notch seal (Specify at order)
Machine coupling — Clevis pin size or adapter to your machine (On request)
What's Included
Pair of pincer grips, one for each side of the sachet
Small pincer jaws with knurled clamping screws
Clevis pin coupling to suit your machine (other sizes via adapters)
Supported Test Standards
Standards list
Compatible Grips & Fixtures
100 lb Tensile Tester — Low-force frame; fit a low-capacity load cell
UGC-PL-010 T-Peel Fixture for Medical Packaging — Supported T-peel for pouch seal strength
UGC-PL-040 Yogurt Cup Peel Fixture — Lid peel on yogurt cups and sealed containers
Food Testing Fixtures — Fixtures for food and food packaging tests
Tear Testing — Overview of tear test methods
Adapters — Couplings for other machine connections
“Customer quote”
Related Equipment
UGC-PL-010 T-Peel Fixture for Medical Packaging
Supported 90° T-peel fixture, rated to 100 N, that holds the specimen tail at 90° for seal strength tests on medical and
UGC-PL-040 Yogurt Cup Peel Fixture
Vacuum cup holder on a graduated tilting segment for lid peel and seal strength tests on yogurt cups and similar sealed
UGC-PL-050 Adjustable Angle Tape Peel Fixture
Peel fixture with an adjustable angle and a linear-guided 60 x 230 mm test plate for thermoplastic tape, edge banding an
UGC-PL-070 ID Card 90 Degree Peel Fixture ISO IEC 10373
Roller-guided 90° peel fixture, rated to 2 kN, for testing the adhesion of layers on identification cards to ISO/IEC 103
Sachet Packaging Tear Grip FAQ
What does the UGC-PL-060 measure?
The force needed to tear open a sachet from its serrated edge or V-notch. The two grips pull apart in a way that imitates human fingers.
What is the maximum load?
20 N (about 4.5 lbf). Use a low-capacity load cell so the tear force reads well above the noise floor.
Is it a pair of grips?
Yes. Each pincer grip holds one side of the sachet at the notch, and the two are pulled apart by the testing machine.
Which sachets can it test?
Food, pharmaceutical and medical sachets and pouches with serrated or V-notch seals. Tell us your sachet size and seal type when ordering.
Can it test at low or elevated temperature?
The grips are rated from 0 to +70 °C (32 to 158 °F).
How do the grips connect to my machine?
With a clevis pin coupling. Other sizes are available through our adapters; contact us with your machine model.




