Home › Products › Peel Fixtures › 90 Degree Peel Accessory





90 Degree Peel Accessory – Base Plate with Guide Rod
Flat base plate fixture with a height-adjustable guide rod that holds the peel line while an upper grip pulls the free strip at 90°.
Brand: Universal Grip | Model: UGC-PL-020 | ● Configured to order
Flat aluminum base plate carries the bonded substrate during the peel
Guide rod between two slotted uprights sets the height of the peel line
Knurled knob adjusts and locks the rod without tools
Free strip is pulled vertically by an upper grip to keep the peel angle at 90°
Steel and aluminum or nickel-plated steel construction, by version
Female clevis coupling with Ø 15.9 mm (5/8 in) or Ø 20 mm pin
Downloads and standards
Trusted by Global Companies


























Base plate accessory for 90° peel tests
The UGC-PL-020 is a 90° peel accessory for bonded flexible materials on flat substrates: tapes and labels, laminated films, coatings and other adhesive bonds. It is aimed at QC and R&D labs that want a simple, rigid setup for 90° peel work, where the substrate sits flat and the peeled strip leaves it at a right angle. The accessory mounts in the lower position of the testing machine and works with an upper grip of your choice.
How it works
The specimen substrate lies on a flat aluminum base plate. Above it, a guide rod spans two slotted uprights and can be raised or lowered to suit the specimen, then locked with a knurled clamp. The rod holds the peel line in place, and the free strip is pulled vertically by the upper grip. Because the peel line is held at the rod and the pull is vertical, the peel angle stays at 90° through the test instead of drifting as the bond opens.
Tool-free adjustment: the knurled knob lets the operator reset the rod height between specimens of different thickness without reaching for a wrench.
Rigid construction: steel and aluminum parts give a stable, repeatable setup; a nickel-plated steel version is also available.
Size: the steel and aluminum version measures 400 x 250 x 112 mm (about 15.7 x 9.8 x 4.4 in).
Versions and couplings
Two versions are offered. The steel and aluminum version has a female clevis for a Ø 20 mm pin. The nickel-plated steel version has a female clevis for a Ø 15.9 mm (5/8 in) pin. If your machine uses a different connection, we supply adapters. The maximum load is confirmed on request, so tell us your expected peel force and we will check the rating against it.
Choosing a 90° peel setup
This accessory suits flat specimens where a guide rod is enough to hold the peel line. For strips up to 50 mm wide held under a roller, see the UGC-PL-100 90° peel grip with 25 mm roller. If the lower attachment needs to travel with the peel front, the UGC-PL-030 peel test table with ball guide carries the specimen on a low-friction carriage. Our peel fixtures page lists the full range.
Upper grip
The upper grip is ordered separately and sized to your strip width. Manual vise grips are a common choice; pneumatic grips speed up loading when many strips are tested per shift.
Tell us your specimen width and length, the coupling pin size on your machine and the upper grip you plan to use, and we will configure the accessory. Request a quote.
Product video
At a glance
Test type: 90° peel
Overall size: 400 x 250 x 112 mm (approx. 15.7 x 9.8 x 4.4 in), steel and aluminum version
Base plate: Flat aluminum plate for the substrate
Guide rod: Height-adjustable between slotted uprights, knurled clamp
Coupling: Female clevis, Ø 15.9 mm (5/8 in) or Ø 20 mm pin, by version
Material: Steel and aluminum; nickel-plated steel version
90 Degree Peel Accessory Specifications
TEST TYPE
90° peel
OVERALL SIZE
400 x 250 x 112 mm (approx. 15.7 x 9.8 x 4.4 in), steel and aluminum version
BASE PLATE
Flat aluminum plate for the substrate
GUIDE ROD
Height-adjustable between slotted uprights, knurled clamp
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) or Ø 20 mm pin, by version
MATERIAL
Steel and aluminum; nickel-plated steel version
MAX. LOAD
On request
TEMPERATURE RANGE
On request
UPPER GRIP
Ordered separately
DRAWINGS
Dimensional drawings and 3D models on request
PART REF.
UGC-PL-020
Models & Options
Steel and aluminum — Steel and aluminum construction with female clevis for Ø 20 mm pin (Specify at order)
Nickel-plated steel — Nickel-plated steel construction with female clevis for Ø 15.9 mm (5/8 in) pin (Specify at order)
Upper grip — Grip for the free strip, sized to the specimen width (On request)
Other couplings — Adapters to other machine connections (On request)
What's Included
90° peel accessory with base plate, slotted uprights and height-adjustable guide rod
Knurled clamp for setting the guide rod height
Female clevis coupling for the pin size of the version ordered (Ø 15.9 mm or Ø 20 mm)
Upper grip for the free strip is ordered separately
Supported Test Standards
Standards list
Compatible Grips & Fixtures
Vise Grips — Upper grip for the free strip
Pneumatic Grips — Fast clamping of the strip end
UGC-PL-100 90 Degree Peel Grip 25 mm Roller — Roller-type 90° peel grip for strips to 50 mm wide
UGC-PL-030 Peel Test Table with Ball Guide — Sliding table that follows the peel front
Adapters — Couplings for other machine connections
Adhesives Testing — Peel, shear and tack testing of adhesives
“Customer quote”
Related Equipment
UGC-PL-030 Peel Test Table with Ball Guide
Low-friction peel table whose carriage runs on a recirculating ball guide and follows the peel front, keeping the peel a
UGC-PL-100 90 Degree Peel Grip 25 mm Roller
Compact 500 N peel grip that holds the rigid substrate under a height-adjustable Ø 25 mm roller for 90° peel tests on st
UGC-PL-010 T-Peel Fixture for Medical Packaging
Supported 90° T-peel fixture, rated to 100 N, that holds the specimen tail at 90° for seal strength tests on medical and
UGC-PL-040 Yogurt Cup Peel Fixture
Vacuum cup holder on a graduated tilting segment for lid peel and seal strength tests on yogurt cups and similar sealed
90 Degree Peel Accessory FAQ
How is the specimen held on the UGC-PL-020?
The substrate lies on the flat base plate and a guide rod, set in height on two slotted uprights, holds the peel line. The free strip is pulled vertically by an upper grip.
How is the 90° angle maintained?
The guide rod holds the peel line in place while the upper grip pulls straight up, so the strip leaves the substrate at 90° throughout the test.
Which coupling does it have?
A female clevis for a Ø 20 mm pin on the steel and aluminum version, or for a Ø 15.9 mm (5/8 in) pin on the nickel-plated steel version. Other connections via our adapters.
What is the maximum load?
The load rating is confirmed on request. Tell us your expected peel force when you contact us.
Is the upper grip included?
No, it is ordered separately and sized to your strip width; vise grips are a common choice.
What is the difference from the UGC-PL-100?
The UGC-PL-020 holds the peel line with a height-adjustable guide rod over a flat base plate. The UGC-PL-100 clamps the substrate under a Ø 25 mm roller for specimens up to 50 mm wide.




