Home › Products › Peel Fixtures › Yogurt Cup Peel Fixture





Yogurt Cup Peel Fixture – Vacuum Cup Holder
Vacuum cup holder on a graduated tilting segment for lid peel and seal strength tests on yogurt cups and similar sealed containers.
Brand: Universal Grip | Model: UGC-PL-040 | ● Configured to order
Holds the cup by vacuum without deforming the cup wall
Graduated tilting segment sets the peel angle; a lever lock holds it
Fixed 0° / 45° version or adjustable-angle versions up to 60°
Accepts cups up to 70–75 mm (about 2.8–3.0 in) high, by version
Reproduces the consumer opening motion for repeatable peel force results
Operating range 0 to +70 °C (32 to 158 °F)
Downloads and standards
Trusted by Global Companies


























Lid peel fixture for yogurt cups and sealed containers
The UGC-PL-040 measures the seal strength of peelable lids on yogurt cups, dairy portion packs, food trays and other sealed containers. It is designed for food packaging QC labs and lidding film suppliers who need to know how much force it takes to open a pack, and whether that force stays consistent from one production run to the next.
How it works
The cup sits in a holder and is held by vacuum, so it is gripped firmly without squeezing or deforming the cup wall. The holder is mounted on a graduated tilting segment that sets the angle of the cup relative to the direction of pull, and a lever lock holds the chosen angle. A small upper grip clamps the lid tab and pulls it upward. This reproduces the motion a consumer makes when opening the pack, and because the cup position and angle are fixed by the fixture, peel force results repeat from cup to cup.
Versions
Vacuum, 0° and 45°: two fixed peel angles, for cups up to 75 mm (about 3.0 in) high.
Adjustable angle: angle set on the graduated segment, for cups up to 70 mm (about 2.8 in) high.
Adjustable 0–60°: a wider angle range from 0 to 60° for labs that compare lid behavior across several opening angles.
All versions connect to the machine with a female clevis and Ø 15.9 mm (5/8 in) pin, and are rated for use from 0 to +70 °C (32 to 158 °F). Other couplings are available through our adapters.
What you need alongside the fixture
A vacuum source is needed to hold the cup; tell us what your lab has and we will confirm the connection when quoting. The upper grip for the lid tab is ordered separately; a small manual vise grip is a typical choice. The maximum load is confirmed on request against your expected peel forces.
Typical applications
Dairy cups, food tray lids, portion packs and peelable lidding films. The fixture sits naturally alongside our other food testing fixtures and packaging fixtures such as the UGC-PL-060 sachet packaging tear grip. For seal strength on pouch strips rather than whole containers, see the UGC-PL-010 T-peel fixture.
Tell us your cup diameter and height, the peel angle range you need, your vacuum supply and the upper grip, and we will configure the fixture. Request a quote.
Product video
At a glance
Test type: Lid peel / seal strength
Specimen: Cups and containers up to 70–75 mm high, by version
Peel angle: 0° and 45°, or adjustable up to 60°, by version
Angle setting: Graduated tilting segment with lever lock
Cup fixation: Vacuum
Coupling: Female clevis, Ø 15.9 mm (5/8 in) pin
Yogurt Cup Peel Fixture Specifications
TEST TYPE
Lid peel / seal strength
SPECIMEN
Cups and containers up to 70–75 mm high, by version
PEEL ANGLE
0° and 45°, or adjustable up to 60°, by version
ANGLE SETTING
Graduated tilting segment with lever lock
CUP FIXATION
Vacuum
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin
TEMPERATURE RANGE
0 to +70 °C (32 to 158 °F)
MAX. LOAD
On request
CUP DIAMETER
Specify at order
UPPER GRIP
Ordered separately
VACUUM SOURCE
Required
PART REF.
UGC-PL-040
Models & Options
Vacuum, 0° and 45° — Two fixed peel angles; cups up to 75 mm high (Specify at order)
Adjustable angle — Angle set on the graduated segment; cups up to 70 mm high (Specify at order)
Adjustable 0–60° — Wider adjustable angle range, 0 to 60° (Specify at order)
Upper grip for lid tab — Small grip to clamp the lid tab (On request)
Machine coupling — Adapters to other machine connections (On request)
What's Included
Vacuum cup holder on a graduated tilting segment with lever lock, in the version ordered
Female clevis coupling with Ø 15.9 mm (5/8 in) pin
Upper grip for the lid tab is ordered separately
A vacuum source is needed; confirm supply and connection when quoting
Supported Test Standards
Standards list
Compatible Grips & Fixtures
Food Testing Fixtures — Fixtures for food and food packaging tests
UGC-PL-060 Sachet Packaging Tear Grip — Tear-open force of notched sachets
UGC-PL-010 T-Peel Fixture for Medical Packaging — Supported T-peel for pouch and lid seal strips
Vise Grips — Small manual grip for the lid tab
Adapters — Couplings for other machine connections
“Customer quote”
Related Equipment
UGC-PL-010 T-Peel Fixture for Medical Packaging
Supported 90° T-peel fixture, rated to 100 N, that holds the specimen tail at 90° for seal strength tests on medical and
UGC-PL-060 Sachet Packaging Tear Grip
Pair of 20 N pincer grips that imitate finger action to measure the tear-open force of sachets with serrated or V-notch
UGC-PL-030 Peel Test Table with Ball Guide
Low-friction peel table whose carriage runs on a recirculating ball guide and follows the peel front, keeping the peel a
UGC-PL-050 Adjustable Angle Tape Peel Fixture
Peel fixture with an adjustable angle and a linear-guided 60 x 230 mm test plate for thermoplastic tape, edge banding an
Yogurt Cup Peel Fixture FAQ
How is the cup held during the test?
By vacuum. The cup sits in a holder and vacuum holds it firmly without deforming the wall, while a small upper grip pulls the lid tab.
Which peel angles are available?
A fixed version with 0° and 45°, an adjustable-angle version, and an adjustable version covering 0 to 60°. The angle is set on a graduated segment and held by a lever lock.
How tall can the cup be?
Up to 75 mm (about 3.0 in) on the 0°/45° version and up to 70 mm (about 2.8 in) on the adjustable-angle version. Tell us your cup diameter when ordering.
Do I need a vacuum pump?
A vacuum source is needed to hold the cup. Tell us what you have and we will confirm the connection when we quote.
What temperature range does it cover?
The fixture is rated from 0 to +70 °C (32 to 158 °F); tell us if your tests fall outside that range.
Is the upper grip included?
No, it is ordered separately; a small vise grip is a typical choice. Contact us for a complete setup.




