top of page

Home  ›  Products  ›  Peel Fixtures  ›  90 Degree Peel Grip 25 mm Roller

UGC-PL-100 90 degree peel grip with 25 mm roller for specimens up to 50 mm wide by Universal Grip
UGC-PL-100 90 degree peel grip with 25 mm roller for specimens up to 50 mm wide by Universal Grip
UGC-PL-100 90 Degree Peel Grip 25 mm Roller by Universal Grip, view 2
UGC-PL-100 90 Degree Peel Grip 25 mm Roller by Universal Grip, view 3
UGC-PL-100 90 Degree Peel Grip 25 mm Roller by Universal Grip, view 4

90 Degree Peel Grip 25 mm Roller – 500 N

Compact 500 N peel grip that holds the rigid substrate under a height-adjustable Ø 25 mm roller for 90° peel tests on strips up to 50 mm wide.

Brand: Universal Grip  |  Model: UGC-PL-100  |  ● Configured to order

  • Ø 25 x 50 mm roller holds the substrate while the flexible layer is pulled at 90°

  • Roller height adjustable 0–25 mm (about 0–1 in) to suit specimen thickness

  • Takes specimens up to 50 mm (about 2 in) wide

  • Rated to 500 N (about 112 lbf)

  • Nickel-plated steel construction for corrosion resistance

  • Wide and heavy-duty multi-roller special versions up to 15 kN

Downloads and standards

Trusted by Global Companies

Compact 90° peel grip with Ø 25 mm roller

The UGC-PL-100 is a compact grip for 90° adhesion tests on flexible layers bonded to a rigid substrate. It suits QC labs and converters testing adhesive tapes, laminated films, coatings and foils, where a simple and quick-to-load 90° setup is more useful than a full sliding-table fixture. The standard grip is rated to 500 N (about 112 lbf) and takes specimens up to 50 mm (about 2 in) wide.

 

How it works

The rigid substrate is slid under a Ø 25 mm roller, 50 mm long, mounted in the grip body. The roller height can be set anywhere from 0 to 25 mm (about 0 to 1 in) so the substrate is held without play, whether it is a thin metal panel or a thicker molded part. The flexible layer is clamped in an upper grip and pulled vertically. The roller holds the substrate down at the peel line, so the layer leaves it at 90°.

  • Quick specimen insertion: the adjustable roller height lets operators load and remove specimens without dismantling the grip.

  • Corrosion resistance: the grip body is nickel-plated steel, so it keeps its finish in daily lab use.

  • Coupling: female clevis with Ø 15.9 mm (5/8 in) pin; other couplings on request or through our adapters.

  • Temperature: 0 to +70 °C, with other ranges on request.

 

Versions

  • Standard: Ø 25 mm roller, specimens up to 50 mm wide, 500 N.

  • Wide special: Ø 20 and 25 mm rollers for specimens up to 60 mm wide.

  • Heavy-duty special: 16 rollers Ø 25 mm for specimens up to 200 mm wide and 60 mm thick, rated to 15 kN (about 3,372 lbf).

 

Choosing a 90° peel setup

The UGC-PL-100 is the compact choice for routine 90° peel work on narrow strips. For a sliding-table 90° fixture that keeps the peel point centered under the load axis, see the UGC-PL-150 90° adhesive peel fixture ISO 8510-1. For a base plate with a height-adjustable guide rod, see the UGC-PL-020 90° peel accessory. All options are on our peel fixtures page.

 

Upper grip and machine fit

The upper grip for the flexible layer is ordered separately; manual vise grips or pneumatic grips sized to your strip width are typical. At 500 N, the standard grip suits our 300 lb tensile tester or a Galdabini 2.5 kN benchtop universal testing machine. The 15 kN heavy-duty special calls for a correspondingly larger frame.

Tell us your specimen width and thickness, your machine coupling and the upper grip you plan to use, and we will configure the grip. Request a quote.

Product video

At a glance

  • Max. load: 500 N (approx. 112 lbf)

  • Test type: 90° peel

  • Roller: Ø 25 mm x 50 mm

  • Specimen width: Max. 50 mm (approx. 2 in)

  • Specimen height adjustment: 0–25 mm (approx. 0–1 in)

  • Coupling: Female clevis, Ø 15.9 mm (5/8 in) pin; others on request

90 Degree Peel Grip 25 mm Roller Specifications

MAX. LOAD

500 N (approx. 112 lbf)

 

TEST TYPE

90° peel

 

ROLLER

Ø 25 mm x 50 mm

 

SPECIMEN WIDTH

Max. 50 mm (approx. 2 in)

 

SPECIMEN HEIGHT ADJUSTMENT

0–25 mm (approx. 0–1 in)

 

COUPLING

Female clevis, Ø 15.9 mm (5/8 in) pin; others on request

 

MATERIAL

Steel, nickel-plated

 

TEMPERATURE RANGE

0 to +70 °C; other ranges on request

 

WEIGHT

On request

 

UPPER GRIP

Ordered separately

 

DRAWINGS

Dimensional drawing on page 2 of the data sheet; certified drawings and 3D models on request

 

PART REF.

UGC-PL-100

 

Models & Options

  • Standard — Ø 25 mm roller, 50 mm specimen width, 500 N (Specify at order)

  • Wide special — Ø 20 and 25 mm rollers, 60 mm width (On request)

  • Heavy-duty special — 16 rollers Ø 25 mm, specimens to 200 mm wide and 60 mm thick, 15 kN (On request)

  • Upper grip — Grip for the flexible layer, sized to strip width (On request)

What's Included

  • 1 90° peel grip with height-adjustable Ø 25 mm roller (or the special version ordered)

  • Female clevis coupling with Ø 15.9 mm (5/8 in) pin

  • Upper grip for the flexible layer is ordered separately

Supported Test Standards

Standards list

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-PL-020 90 Degree Peel Accessory

UGC-PL-020 90 Degree Peel Accessory

Flat base plate fixture with a height-adjustable guide rod that holds the peel line while an upper grip pulls the free s

UGC-PL-150 90 Degree Adhesive Peel Fixture ISO 8510-1

UGC-PL-150 90 Degree Adhesive Peel Fixture ISO 8510-1

Wire-driven sliding-table fixture that keeps the peel point centered at a constant 90° for flexible-to-rigid adhesive bo

UGC-PL-090 Climbing Drum Peel Fixture

UGC-PL-090 Climbing Drum Peel Fixture

10 kN climbing drum peel fixture for sandwich panels and bonded laminates, with 102 mm (ASTM D1781) and 100 mm (EN 2243-

UGC-PL-110 Floor and Wall Covering Peel Fixture EN 1372

UGC-PL-110 Floor and Wall Covering Peel Fixture EN 1372

Floating roller peel fixture for floor and wall covering adhesives to EN 1372 and ISO 22631, with 57, 97 or 157 mm rolle

90 Degree Peel Grip 25 mm Roller FAQ

How does the UGC-PL-100 hold the specimen?

The rigid substrate sits under a Ø 25 mm roller set to its thickness, and the flexible layer is pulled vertically by an upper grip, giving a 90° peel.

 

What specimen sizes fit?

Specimens up to 50 mm (about 2 in) wide, with roller height adjustable from 0 to 25 mm. Wider specimens are covered by the special versions.

 

What is the load rating?

500 N (about 112 lbf) for the standard grip. A heavy-duty special with 16 rollers is rated to 15 kN.

 

Is the upper grip included?

No. It is ordered separately and sized to your strip width; vise grips are a common choice.

 

How is it different from the UGC-PL-150?

The UGC-PL-100 is a compact roller grip for routine 90° peel on narrow strips. The UGC-PL-150 is a sliding-table 90° peel fixture for ISO 8510-1 work, with fixed or adjustable-angle versions.

 

How does it mount?

With a female clevis and Ø 15.9 mm (5/8 in) pin; other couplings on request or via our adapters. Contact us with your machine model.

 

Need help configuring a peel fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page