top of page

Home  ›  Products  ›  Peel Fixtures  ›  ID Card 90 Degree Peel Fixture ISO IEC 10373

UGC-PL-070 ID card 90 degree peel fixture with guide rollers for ISO/IEC 10373-1 by Universal Grip
UGC-PL-070 ID card 90 degree peel fixture with guide rollers for ISO/IEC 10373-1 by Universal Grip
UGC-PL-070 ID Card 90 Degree Peel Fixture ISO IEC 10373 by Universal Grip, view 2
UGC-PL-070 ID Card 90 Degree Peel Fixture ISO IEC 10373 by Universal Grip, view 3
UGC-PL-070 ID Card 90 Degree Peel Fixture ISO IEC 10373 by Universal Grip, view 4

ID Card 90 Degree Peel Fixture ISO IEC 10373

Roller-guided 90° peel fixture, rated to 2 kN, for testing the adhesion of layers on identification cards to ISO/IEC 10373-1.

Brand: Universal Grip  |  Model: UGC-PL-070  |  ● Configured to order

  • Roller guidance holds the peel angle at 90° as the layer is pulled

  • Rollers Ø 10 mm with a 1 mm gap for standard card thickness

  • 6-roller version with articulated joints for peel angle alignment

  • 4-roller version with 14 mm gap for thicker specimens

  • Stainless steel rollers on the standard versions

  • Rated to 2 kN (about 450 lbf); weights from 0.94 to 2.7 kg by version

Standards: ISO/IEC 10373-1  ·  ISO/IEC 7810

Trusted by Global Companies

90° peel fixture for ID card layer adhesion

The UGC-PL-070 is a 90° peel fixture for testing the adhesive strength of layers on identification cards, the peel test described in ISO/IEC 10373-1 for cards with the physical format of ISO/IEC 7810. It is used by card manufacturers, laminating film and overlay suppliers, and test labs qualifying ID, access, payment and smart cards. The fixture is rated to 2 kN (about 450 lbf).

 

How it works

The card is guided between rollers spaced 1 mm apart. As the peeled layer is pulled upward by an upper grip, the rollers keep the card body in line, so the layer leaves the card at 90° throughout the test instead of the card tilting with the pull. The result is a peel force that reflects the bond between card layers, not changes in geometry.

See our complete ISO/IEC 10373-1 guide for specimen preparation, procedure and calculations; this page covers the hardware.

 

Roller configurations

  • 6 rollers Ø 10 mm: 1 mm gap, stainless steel rollers and articulated joints that help align the peel angle; 2.7 kg (about 6.0 lb).

  • 2 rollers Ø 10 mm: 1 mm gap and stainless steel rollers in a lighter fixture; 1.09 kg (about 2.4 lb).

  • 4 rollers Ø 6 mm: a 14 mm gap for thicker specimens, aluminum body; 0.94 kg (about 2.1 lb).

Body material is nickel-plated steel or anodized aluminum depending on the version. The standard coupling is a female clevis with a Ø 15.9 mm (5/8 in) pin; other couplings are available on request or through our adapters. The operating range is 0 to +70 °C, with other ranges on request.

 

Typical applications

ID and access cards, payment and smart cards, and laminated card overlays. The thicker-specimen version also lends itself to adhesion work on electroplated plastic parts, where a metal layer is peeled from a molded substrate.

 

Choosing the version and machine

For standard cards, choose between the 6-roller version, when angle alignment matters most, and the lighter 2-roller version. Choose the 4-roller version for anything thicker than a standard card. The fixture is supplied as one unit; the upper grip for the peeled layer is ordered separately, and small vise grips are a common choice. In the 2 kN range, the fixture suits our 1,500 lb tensile tester or a Galdabini 2.5 kN benchtop universal testing machine.

Tell us your card or specimen thickness, the roller configuration you prefer, your machine coupling and the upper grip, and we will configure the fixture. Request a quote.

Product video

At a glance

  • Max. load: 2 kN (approx. 450 lbf)

  • Test type: 90° peel

  • Rollers: 6 or 2 x Ø 10 mm (1 mm gap), or 4 x Ø 6 mm (14 mm gap)

  • Roller material: Stainless steel on 6- and 2-roller versions

  • Coupling: Female clevis, Ø 15.9 mm (5/8 in) pin; others on request

  • Body material: Steel, nickel-plated, or anodized aluminum, by version

ID Card 90 Degree Peel Fixture ISO IEC 10373 Specifications

MAX. LOAD

2 kN (approx. 450 lbf)

 

TEST TYPE

90° peel

 

ROLLERS

6 or 2 x Ø 10 mm (1 mm gap), or 4 x Ø 6 mm (14 mm gap)

 

ROLLER MATERIAL

Stainless steel on 6- and 2-roller versions

 

COUPLING

Female clevis, Ø 15.9 mm (5/8 in) pin; others on request

 

BODY MATERIAL

Steel, nickel-plated, or anodized aluminum, by version

 

TEMPERATURE RANGE

0 to +70 °C; other ranges on request

 

WEIGHT

2.7 kg, 1.09 kg or 0.94 kg, by version

 

SCOPE OF SUPPLY

1 fixture; upper grip ordered separately

 

STANDARDS NAMED

ISO/IEC 10373-1, ISO/IEC 7810

 

DRAWINGS

Dimensional drawings on page 2 of the data sheet; certified drawings and 3D models on request

 

PART REF.

UGC-PL-070

 

Models & Options

  • 6 rollers Ø 10 mm — 1 mm gap, articulated joints, stainless steel rollers, 2.7 kg (Specify at order)

  • 2 rollers Ø 10 mm — 1 mm gap, stainless steel rollers, 1.09 kg (Specify at order)

  • 4 rollers Ø 6 mm — 14 mm gap for thicker specimens, aluminum body, 0.94 kg (Specify at order)

  • Upper grip — Grip for the peeled layer (On request)

  • Other couplings and temperature ranges — Alternatives to the Ø 15.9 mm clevis and 0 to +70 °C range (On request)

What's Included

  • 1 roller-guided 90° peel fixture in the configuration ordered (6, 2 or 4 rollers)

  • Female clevis coupling with Ø 15.9 mm (5/8 in) pin, or the coupling agreed at order

  • Upper grip for the peeled layer is ordered separately

Supported Test Standards

  • ISO/IEC 10373-1 — Identification cards – test methods, general characteristics

  • ISO/IEC 7810 — Identification cards – physical characteristics

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-PL-100 90 Degree Peel Grip 25 mm Roller

UGC-PL-100 90 Degree Peel Grip 25 mm Roller

Compact 500 N peel grip that holds the rigid substrate under a height-adjustable Ø 25 mm roller for 90° peel tests on st

UGC-PL-060 Sachet Packaging Tear Grip

UGC-PL-060 Sachet Packaging Tear Grip

Pair of 20 N pincer grips that imitate finger action to measure the tear-open force of sachets with serrated or V-notch

UGC-PL-080 Floating Roller Peel Fixture

UGC-PL-080 Floating Roller Peel Fixture

10 kN floating roller peel fixture for flexible-to-rigid adhesive bonds, with ASTM D3167 and EN/ISO roller geometries.

UGC-PL-050 Adjustable Angle Tape Peel Fixture

UGC-PL-050 Adjustable Angle Tape Peel Fixture

Peel fixture with an adjustable angle and a linear-guided 60 x 230 mm test plate for thermoplastic tape, edge banding an

ID Card 90 Degree Peel Fixture ISO IEC 10373 FAQ

Which test is the UGC-PL-070 for?

The 90° peel test for the adhesive strength of card layers described in ISO/IEC 10373-1, on cards to ISO/IEC 7810. Our ISO/IEC 10373-1 guide covers the procedure.

 

How is the 90° angle maintained?

The card runs between rollers spaced 1 mm apart, which keep it in line while the upper grip pulls the layer, so the peel stays at 90°.

 

Which roller version should I choose?

The 6-roller version adds articulated joints for angle alignment; the 2-roller version is lighter. The 4-roller version with a 14 mm gap is for thicker specimens.

 

What is the maximum load?

2 kN (about 450 lbf) on all versions.

 

Is the upper grip included?

No. The fixture is supplied as one unit and the upper grip for the peeled layer is ordered separately.

 

Which coupling and temperature range apply?

A female clevis with Ø 15.9 mm (5/8 in) pin and 0 to +70 °C as standard; other couplings and ranges on request. Contact us with your machine model.

 

Need help configuring a peel fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page