Home › Products › Peel Fixtures › Floating Roller Peel Fixture





Floating Roller Peel Fixture – ASTM D3167 and ISO 4578
10 kN floating roller peel fixture for flexible-to-rigid adhesive bonds, with ASTM D3167 and EN/ISO roller geometries.
Brand: Universal Grip | Model: UGC-PL-080 | ● Configured to order
Floating roller geometry peels the flexible adherend at a consistent radius
Rated to 10 kN (about 2,248 lbf)
ASTM version with Ø 25.4 mm, 25.4 mm wide (1 x 1 in) rollers
EN/ISO version with Ø 25 mm, 30 mm wide rollers
Nickel-plated steel body for corrosion resistance
Light fixture of 0.60–0.68 kg (about 1.3–1.5 lb), by version
Standards: ASTM D3167 · ISO 4578 · EN 1464 · EN 2243-2
Trusted by Global Companies


























Floating roller peel fixture for structural adhesive bonds
The UGC-PL-080 is a fixture for the floating roller peel test, which measures the peel resistance of an adhesive bond between a flexible and a rigid adherend. It is used by adhesive manufacturers, aerospace suppliers, and qualification labs testing structural adhesives on metal-to-metal joints. The fixture is rated to 10 kN (about 2,248 lbf) and comes in two roller geometries, one for ASTM D3167 and one for the DIN, EN and ISO methods.
How it works
The rigid adherend runs between a set of rollers that float with the specimen. The flexible adherend is clamped in a lower grip and pulled, so it is peeled away from the rigid adherend over the rollers at a controlled radius. Because the rollers set the bend radius and move with the specimen, the peel geometry stays the same along the bond line, and the average force over the peel length describes the adhesive rather than the setup.
For specimen preparation, procedure and calculations, see our complete ASTM D3167 guide and our ISO 4578 guide.
Versions
ASTM D3167 version: rollers Ø 25.4 mm and 25.4 mm wide (1 x 1 in); 0.68 kg.
DIN/EN/ISO version: rollers Ø 25 mm and 30 mm wide, for tests such as DIN 53289, EN 1464, EN 2243-2 and ISO 4578; 0.60 kg.
Both versions have a nickel-plated steel body and a female clevis coupling with Ø 15.9 mm (5/8 in) pin. Other machine connections are handled with our adapters. The operating range is 0 to +70 °C, with other ranges on request for work in an environmental chamber.
Lower grip
The fixture is supplied as one unit and the lower grip for the flexible adherend is ordered separately. Mechanical wedge grips and vise grips are common choices; tell us the adherend thickness and width and we will recommend a grip and jaw face.
Typical applications and machine fit
Structural adhesives, aerospace bonded joints, metal-to-metal bonds and adhesive qualification programs. With a 10 kN rating, the fixture is a natural match for a Galdabini 10 kN benchtop universal testing machine; smaller frames work as long as your peel forces stay within their range.
Tell us the standard you test to (ASTM or EN/ISO roller geometry), your machine coupling and the lower grip you need, and we will configure the fixture. Request a quote.
Product video
At a glance
Max. load: 10 kN (approx. 2,248 lbf)
Test type: Floating roller peel
Roller size: Ø 25.4 x 25.4 mm (1 x 1 in) or Ø 25 x 30 mm, by version
Coupling: Female clevis, Ø 15.9 mm (5/8 in) pin; others via adapter
Body material: Steel, nickel-plated
Temperature range: 0 to +70 °C; other ranges on request
Floating Roller Peel Fixture Specifications
MAX. LOAD
10 kN (approx. 2,248 lbf)
TEST TYPE
Floating roller peel
ROLLER SIZE
Ø 25.4 x 25.4 mm (1 x 1 in) or Ø 25 x 30 mm, by version
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin; others via adapter
BODY MATERIAL
Steel, nickel-plated
TEMPERATURE RANGE
0 to +70 °C; other ranges on request
WEIGHT
0.68 kg (ASTM) or 0.60 kg (EN/ISO)
SCOPE OF SUPPLY
1 fixture; lower grip ordered separately
STANDARDS NAMED
ASTM D3167, DIN 53289, EN 1464, ISO 4578, EN 2243-2
DRAWINGS
Dimensional drawings on page 2 of the data sheet; certified drawings and 3D models on request
PART REF.
UGC-PL-080
Models & Options
ASTM D3167 version — Rollers Ø 25.4 mm, 25.4 mm wide; 0.68 kg (Specify at order)
DIN/EN/ISO version — Rollers Ø 25 mm, 30 mm wide; DIN 53289, EN 1464, EN 2243-2, ISO 4578; 0.60 kg (Specify at order)
Lower grip — Grip for the flexible adherend (On request)
Other couplings and temperature ranges — Adapters and ranges beyond 0 to +70 °C (On request)
What's Included
1 floating roller peel fixture in the roller geometry ordered (ASTM or EN/ISO)
Female clevis coupling with Ø 15.9 mm (5/8 in) pin
Lower grip for the flexible adherend is ordered separately
Supported Test Standards
ASTM D3167 — Floating roller peel resistance of adhesives
ISO 4578 — Peel resistance of high-strength adhesive bonds, floating-roller method
EN 1464 — Floating roller peel resistance of adhesives
EN 2243-2 — Aerospace structural adhesives – metal-to-metal peel test
Compatible Grips & Fixtures
ASTM D3167 Guide — Floating roller peel procedure and calculations
Wedge Grips — Lower grip for the flexible adherend
10 kN Benchtop Testing Machine — Galdabini frame matched to the 10 kN rating
UGC-PL-090 Climbing Drum Peel Fixture — Climbing drum peel for sandwich panels
Environmental Chambers — Testing outside room temperature
Adapters — Couplings for other machine connections
“Customer quote”
Related Equipment
UGC-PL-090 Climbing Drum Peel Fixture
10 kN climbing drum peel fixture for sandwich panels and bonded laminates, with 102 mm (ASTM D1781) and 100 mm (EN 2243-
UGC-PL-070 ID Card 90 Degree Peel Fixture ISO IEC 10373
Roller-guided 90° peel fixture, rated to 2 kN, for testing the adhesion of layers on identification cards to ISO/IEC 103
UGC-PL-060 Sachet Packaging Tear Grip
Pair of 20 N pincer grips that imitate finger action to measure the tear-open force of sachets with serrated or V-notch
UGC-PL-100 90 Degree Peel Grip 25 mm Roller
Compact 500 N peel grip that holds the rigid substrate under a height-adjustable Ø 25 mm roller for 90° peel tests on st
Floating Roller Peel Fixture FAQ
What is a floating roller peel test?
The rigid adherend runs between rollers that float with the specimen while the flexible adherend is pulled and peeled over the rollers at a controlled radius. Our ASTM D3167 guide explains the full method.
Which version do I need?
The ASTM D3167 version has Ø 25.4 x 25.4 mm (1 x 1 in) rollers. The DIN/EN/ISO version has Ø 25 x 30 mm rollers for tests such as EN 1464, EN 2243-2, DIN 53289 and ISO 4578.
What is the load rating?
10 kN (about 2,248 lbf) for both versions.
Is the lower grip included?
No. The fixture is supplied as one unit and the grip for the flexible adherend is ordered separately; wedge grips are a common choice.
Can I test above or below room temperature?
The standard range is 0 to +70 °C. Other ranges are available on request for use in an environmental chamber.
How does it mount?
With a female clevis and Ø 15.9 mm (5/8 in) pin. Other connections via our adapters; contact us with your machine model.




