Home › Products › Peel Fixtures › Floor and Wall Covering Peel Fixture EN 1372





Floor and Wall Covering Peel Fixture EN 1372 – Floating Roller
Floating roller peel fixture for floor and wall covering adhesives to EN 1372 and ISO 22631, with 57, 97 or 157 mm rollers rated up to 16 kN.
Brand: Universal Grip | Model: UGC-PL-110 | ● Configured to order
Floating roller peel method for EN 1372 and ISO 22631 adhesive tests
Roller widths of 57, 97 or 157 mm to match the specimen width
Rated 16 kN (57 mm), 12 kN (97 mm) or 8 kN (157 mm)
Second roller height shifts the peel angle 0° to 45° off the standard geometry
Adjustable-distance versions open the roller gap up to 50 mm
Nickel-plated steel construction for use from 0 to +70 °C
Standards: EN 1372 · ISO 22631
Trusted by Global Companies


























Floating roller peel fixture for floor and wall covering adhesives
The UGC-PL-110 is a floating roller peel fixture for adhesive bond tests on floor and wall coverings to EN 1372 and its international counterpart, ISO 22631. It is aimed at adhesive manufacturers, flooring producers and test labs that need to measure how strongly a resilient or textile covering stays bonded to a rigid substrate, and to compare adhesives, substrates or preparation methods on a like-for-like basis.
How it works
The rigid substrate runs between two nickel-plated steel rollers while the covering is pulled away by a lower grip. Because the substrate floats through the rollers instead of being clamped, the peel front stays at the rollers and the geometry repeats from one specimen to the next. The height of the second roller can be set to shift the peel angle from 0° to 45° off the standard geometry, so the same fixture also supports comparative tests at other angles.
Widths, rollers and load ratings
Choose the roller width to suit your specimen:
57 mm wide – rated 16 kN (3,597 lbf), about 1 kg
97 mm wide – rated 12 kN (2,698 lbf), about 1.5 kg
157 mm wide – rated 8 kN (1,798 lbf), about 1.9 kg
Each width is offered with Ø 20 mm or Ø 25 mm rollers. Where substrate thickness changes from job to job, the adjustable-distance versions open the roller gap from 0 to 50 mm (Ø 22 mm rollers) or 0 to 47 mm (Ø 25 mm rollers); both are 57 mm wide and rated 12 kN. A thick-specimen version takes sample carriers up to 30 mm thick at a peel angle of 90–110°.
Typical applications
Floor covering adhesives
Wall covering adhesives
Resilient and textile floor coverings
Automotive trim bonds
Machine fit and coupling
The standard coupling is a female clevis with a Ø 15.9 mm (5/8 in) pin; other couplings are available on request, and our adapters cover most frames. The 8–16 kN ratings sit comfortably within our Galdabini benchtop universal testing machines, and for lower-force covering bonds a Mark-10 F-series motorized tester (up to 1,500 lbF) can be fitted with the right adapter. The fixture works from 0 to +70 °C as standard, with other ranges on request. It is supplied as one grip; the lower grip for the covering is ordered separately, for example a vise grip.
Tell us your covering, substrate thickness, specimen width and testing machine, and we'll configure the fixture and lower grip for your quote.
Product video
At a glance
Max. load: 16 kN / 3,597 lbf (57 mm); 12 kN / 2,698 lbf (97 mm); 8 kN / 1,798 lbf (157 mm)
Test type: Floating roller peel
Rollers: Ø 20 or 25 mm; widths 57, 97 or 157 mm
Peel angle adjustment: 0° to 45° via second roller height
Adjustable roller distance: 0–50 mm (Ø 22 mm rollers) or 0–47 mm (Ø 25 mm rollers), 57 mm wide
Thick specimen version: Peel angle 90–110°, carrier max. 30 mm thick
Floor and Wall Covering Peel Fixture EN 1372 Specifications
MAX. LOAD
16 kN / 3,597 lbf (57 mm); 12 kN / 2,698 lbf (97 mm); 8 kN / 1,798 lbf (157 mm)
TEST TYPE
Floating roller peel
ROLLERS
Ø 20 or 25 mm; widths 57, 97 or 157 mm
PEEL ANGLE ADJUSTMENT
0° to 45° via second roller height
ADJUSTABLE ROLLER DISTANCE
0–50 mm (Ø 22 mm rollers) or 0–47 mm (Ø 25 mm rollers), 57 mm wide
THICK SPECIMEN VERSION
Peel angle 90–110°, carrier max. 30 mm thick
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin; others on request
MATERIAL
Steel, nickel-plated
TEMPERATURE RANGE
0 to +70 °C; other ranges on request
WEIGHT
1 kg, 1.5 kg or 1.9 kg by width
SCOPE OF SUPPLY
1 grip; lower grip ordered separately
PART REF.
UGC-PL-110
Models & Options
57 mm wide — Ø 20 or 25 mm rollers, rated 16 kN (Specify at order)
97 mm wide — Ø 20 or 25 mm rollers, rated 12 kN (Specify at order)
157 mm wide — Ø 20 or 25 mm rollers, rated 8 kN (Specify at order)
Adjustable distance, Ø 22 mm — Roller gap 0–50 mm, 57 mm wide, rated 12 kN (Specify at order)
Adjustable distance, Ø 25 mm — Roller gap 0–47 mm, 57 mm wide, rated 12 kN (Specify at order)
Thick specimen version — Peel angle 90–110°, sample carrier up to 30 mm thick (On request)
Other couplings — Alternatives to the Ø 15.9 mm clevis to suit your machine (On request)
What's Included
1 floating roller peel fixture in the roller diameter and width ordered
Female clevis coupling with Ø 15.9 mm (5/8 in) pin as standard
Lower grip for the peeled covering is ordered separately
Certified drawings and 3D models available on request
Supported Test Standards
EN 1372 — Test method for adhesives for floor and wall coverings – peel test
ISO 22631 — International peel test method for floor and wall covering adhesives
Compatible Grips & Fixtures
Benchtop universal testing machines — Galdabini frames with capacity for all three roller widths
Floating Roller Peel Fixture (UGC-PL-080) — General-purpose floating roller fixture for other adhesive bonds
Vise grips — One option for the lower grip that holds the peeled covering
Adapters — Couplings to match your load cell and machine base
Adhesives testing — Other fixtures and grips for adhesive bond tests
“Customer quote”
Related Equipment
UGC-PL-080 Floating Roller Peel Fixture
10 kN floating roller peel fixture for flexible-to-rigid adhesive bonds, with ASTM D3167 and EN/ISO roller geometries.
UGC-PL-100 90 Degree Peel Grip 25 mm Roller
Compact 500 N peel grip that holds the rigid substrate under a height-adjustable Ø 25 mm roller for 90° peel tests on st
UGC-PL-120 90 Degree Adhesive Peel Grip DIN 40802
Six-roller 90° peel fixture that measures the adhesion of flexible films to rigid substrates up to 7 mm thick, rated 2 k
UGC-PL-090 Climbing Drum Peel Fixture
10 kN climbing drum peel fixture for sandwich panels and bonded laminates, with 102 mm (ASTM D1781) and 100 mm (EN 2243-
Floor and Wall Covering Peel Fixture EN 1372 FAQ
What is the difference between the 57, 97 and 157 mm versions?
Roller width sets the widest specimen the fixture takes, and the load rating falls as width rises: 16 kN for 57 mm, 12 kN for 97 mm and 8 kN for 157 mm. Weight goes from about 1 kg to 1.9 kg.
Can the peel angle be changed?
Yes. Raising or lowering the second roller shifts the peel angle from 0° to 45° off the standard geometry. For carriers up to 30 mm thick, the thick specimen version offers a 90–110° peel angle.
When do I need an adjustable roller distance version?
When substrate thickness varies between jobs. The Ø 22 mm version opens the gap from 0 to 50 mm and the Ø 25 mm version from 0 to 47 mm; both are 57 mm wide and rated 12 kN.
Is the lower grip included?
No. The fixture is supplied as one grip and the lower grip for the covering is ordered separately, for example a vise grip sized to your specimen.
Which testing machines does it fit?
Any frame with enough capacity and a matching coupling, including our benchtop universal testing machines. The standard coupling is a female clevis with Ø 15.9 mm (5/8 in) pin, and adapters cover other machines.
Can it be used outside room temperature?
The standard working range is 0 to +70 °C. Other ranges are available on request, so include your temperature requirement when you request a quote.




