Home › Products › Peel Fixtures › 90 Degree Adhesive Peel Grip DIN 40802





90 Degree Adhesive Peel Grip DIN 40802 – Six-Roller Fixture
Six-roller 90° peel fixture that measures the adhesion of flexible films to rigid substrates up to 7 mm thick, rated 2 kN.
Brand: Universal Grip | Model: UGC-PL-120 | ● Configured to order
Six Ø 12 mm stainless steel rollers on ball bearings let the substrate move freely
Substrate gap adjusts from 0 to 7 mm to suit the rigid part
Separate fixed 0–2 mm gap guides the flexible film
Rated for 2 kN (450 lbf), suited to film and foil adhesion work
Optional stainless steel specimen plate, 200 x 20 x 2 mm
Nickel-plated steel body, 1.31 kg, for use from 0 to +70 °C
Standards: DIN 40802-1 · DIN 53278 · DIN 53494
Trusted by Global Companies


























Six-roller 90° peel grip for flexible films on rigid substrates
The UGC-PL-120 measures the adhesion strength of a flexible film bonded to a rigid substrate at a 90° peel angle. Its geometry is similar to the fixtures described in DIN 40802-1, DIN 53278 and DIN 53494, which makes it a natural fit for electronics and plating labs testing printed circuit laminates, metallized or electroplated plastics, film-to-metal bonds and flexible circuits.
How it works
Six stainless steel rollers, each Ø 12 mm x 25.4 mm long and running on ball bearings, guide the substrate plate so it moves freely while the film is pulled away by a separate grip. Because the plate rolls through the fixture rather than being clamped, the peel point stays put and the 90° angle holds through the stroke. The substrate gap adjusts from 0 to 7 mm (0 to 0.28 in), so thin laminates and thicker rigid boards use the same fixture, while a fixed 0–2 mm gap guides the flexible film out of the fixture.
Specimen plate option
For specimens that need a backing, an optional stainless steel specimen plate measuring 200 x 20 x 2 mm (about 7.9 x 0.79 x 0.08 in) is available, weighing 0.05 kg. The fixture itself is supplied without plates, so order as many as your test program needs.
Construction and ratings
Maximum load 2 kN (450 lbf)
Nickel-plated steel body for corrosion resistance, 1.31 kg
Female clevis coupling with Ø 15.9 mm (5/8 in) pin; other couplings on request
Working range 0 to +70 °C; other ranges on request
Typical applications
Printed circuit laminates
Metallized and electroplated plastics
Film-to-metal bonds
Flexible circuits
Choosing a testing machine and film grip
At 2 kN the fixture pairs well with a Mark-10 F-series motorized tester (100–1,500 lbF) or our Galdabini 2.5 kN universal testing machine. The grip that clamps the flexible film is ordered separately; a compact vise grip is one option, and adapters match other machine couplings. For wider specimens or bonds that call for a sliding-table geometry, compare it with our ISO 8510-1 90° peel fixture (UGC-PL-150).
Send us your substrate thickness, film type and testing machine, and we'll quote the fixture, specimen plates and film grip as one set.
90 Degree Adhesive Peel Grip DIN 40802 Specifications
MAX. LOAD
2 kN (450 lbf)
TEST TYPE
90° peel
ROLLERS
6 x Ø 12 mm x 25.4 mm, stainless steel, ball bearings
SUBSTRATE GAP
0–7 mm (0–0.28 in), adjustable
FILM GAP
0–2 mm, fixed
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin; others on request
BODY MATERIAL
Steel, nickel-plated
SPECIMEN PLATE (OPTIONAL)
Stainless steel, 200 x 20 x 2 mm
TEMPERATURE RANGE
0 to +70 °C; other ranges on request
WEIGHT
1.31 kg (fixture); 0.05 kg (specimen plate)
SCOPE OF SUPPLY
1 fixture without specimen plate; film grip ordered separately
PART REF.
UGC-PL-120
Models & Options
Fixture — Six-roller 90° peel fixture, supplied without specimen plate (Specify at order)
Specimen plate — Stainless steel, 200 x 20 x 2 mm, 0.05 kg (Specify at order)
Other couplings — Alternatives to the Ø 15.9 mm clevis to suit your machine (On request)
What's Included
1 six-roller 90° peel fixture with female clevis coupling (Ø 15.9 mm pin)
Specimen plates are not included; order stainless steel plates separately if needed
The grip that clamps the flexible film is ordered separately
Supported Test Standards
DIN 40802-1 — Printed circuit base material method; fixture geometry is similar
DIN 53278 — German peel method; fixture geometry is similar
DIN 53494 — Peel strength of electroplated plastics; fixture geometry is similar
Compatible Grips & Fixtures
Motorized tensile testers — Mark-10 F-series testers, 100–1,500 lbF, cover the 2 kN rating
2.5 kN universal testing machine — Galdabini benchtop frame for low-force film peel
Vise grips — One option for clamping the flexible film
90° Adhesive Peel Fixture ISO 8510-1 (UGC-PL-150) — Sliding-table fixture for wider specimens
Adapters — Couplings for other machine connections
“Customer quote”
Related Equipment
UGC-PL-150 90 Degree Adhesive Peel Fixture ISO 8510-1
Wire-driven sliding-table fixture that keeps the peel point centered at a constant 90° for flexible-to-rigid adhesive bo
UGC-PL-110 Floor and Wall Covering Peel Fixture EN 1372
Floating roller peel fixture for floor and wall covering adhesives to EN 1372 and ISO 22631, with 57, 97 or 157 mm rolle
UGC-PL-130 German Wheel Peel Fixture
Free-rotating wheel fixture that holds a constant 90° peel angle on tapes, films, release coatings and flexible circuits
UGC-PL-100 90 Degree Peel Grip 25 mm Roller
Compact 500 N peel grip that holds the rigid substrate under a height-adjustable Ø 25 mm roller for 90° peel tests on st
90 Degree Adhesive Peel Grip DIN 40802 FAQ
Is this fixture made to DIN 40802-1?
Its geometry is similar to the fixtures in DIN 40802-1, DIN 53278 and DIN 53494. Check your method's requirements against the specifications here, and we can confirm the details with your quote.
How thick can the rigid substrate be?
The roller gap for the substrate adjusts from 0 to 7 mm (0 to 0.28 in). The flexible film passes through a separate fixed 0–2 mm gap.
Why six rollers?
The six ball-bearing rollers guide the substrate plate on both faces so it moves freely as the film is peeled, keeping the peel at 90° without clamping the plate.
Are specimen plates included?
No. The fixture ships without plates. Optional stainless steel specimen plates measuring 200 x 20 x 2 mm are ordered separately.
What else do I need to run a test?
A grip to clamp the flexible film, such as a compact vise grip, and a testing machine with a matching coupling. The fixture's standard coupling is a female clevis with Ø 15.9 mm (5/8 in) pin.
Which testing machine is a good match?
With a 2 kN (450 lbf) rating, a Mark-10 F-series motorized tester or our 2.5 kN universal testing machine fits well.




