Home › Products › Peel Fixtures › German Wheel Peel Fixture





German Wheel Peel Fixture – 90 mm or 152 mm Wheel
Free-rotating wheel fixture that holds a constant 90° peel angle on tapes, films, release coatings and flexible circuits, rated 4 kN.
Brand: Universal Grip | Model: UGC-PL-130 | ● Configured to order
Free-running wheel turns with the peel so the angle stays at 90°
Ø 90 mm wheel for DIN 53357-B or Ø 152 mm (6 in) wheel for IPC-TM-650 2.4.9
Clamp version fixes the specimen on the 90 mm wheel
Rated for 4 kN (899 lbf) in every version
Anodized aluminum body with a steel holder, 2 to 3.3 kg
Special single-arm versions with interchangeable rollers for pipes and O-rings
Standards: DIN 53357-B · ISO 6133 · IPC-TM-650 2.4.9
Trusted by Global Companies


























German wheel fixture for 90° peel tests on tapes, films and flexible laminates
The UGC-PL-130 German wheel peel fixture measures the bond strength of tapes, plastic and paper films, laminated release coatings and flexible dielectric materials at a 90° peel angle. It suits converters, tape producers and printed circuit labs that want a compact fixture where the wheel, not careful specimen alignment, sets the peel geometry.
How it works
The specimen is bonded around a free-running wheel. As the testing machine pulls the flexible layer away, the wheel turns, presenting fresh bond line at the peel point so the angle stays at 90° throughout the test. There is no sliding table or wire system to set up, which keeps the fixture small and quick to load between specimens.
Wheel sizes and versions
Ø 90 mm (3.54 in) wheel – for DIN 53357-B, 2 kg
Ø 90 mm wheel with clamp – a clamp fixes the specimen to the wheel, DIN 53357-B, 2.05 kg
Ø 152 mm (6 in) wheel – for ISO 6133 and IPC-TM-650 2.4.9, 3.3 kg
Special single-arm versions with interchangeable rollers are also available for peel tests on pipes and O-rings. Describe your part and we will confirm the configuration.
Construction
The body is anodized aluminum with a steel holder, which keeps even the larger wheel manageable at 3.3 kg. Every version is rated for 4 kN (899 lbf) and works from 0 to +70 °C as standard, with other temperature ranges on request. The standard coupling is a female clevis with a Ø 15.9 mm (5/8 in) pin, and other couplings are available.
Typical applications
Adhesive tapes
Plastic and paper films
Release coatings
Flexible printed circuits
Choosing the right setup
Pick the Ø 152 mm wheel when your method calls for the 6 in geometry used on flexible dielectric materials, and the Ø 90 mm wheel, with or without clamp, for DIN 53357-B work. Peel forces on tapes and flexible circuits are usually modest, so a Mark-10 F-series motorized tester (100–1,500 lbF) or our Galdabini 5 kN universal testing machine covers most work. For other machine connections, see our adapters.
Tell us the material, specimen width and the method you follow, and we'll recommend the wheel and coupling — request a quote.
German Wheel Peel Fixture Specifications
MAX. LOAD
4 kN (899 lbf)
TEST TYPE
90° rotating wheel peel
WHEEL DIAMETER
90 mm (3.54 in) or 152 mm (6 in)
SPECIMEN CLAMP
Available on the 90 mm wheel version
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin; others on request
BODY MATERIAL
Anodized aluminum
HOLDER
Steel
TEMPERATURE RANGE
0 to +70 °C; other ranges on request
WEIGHT
2 kg (90 mm), 2.05 kg (90 mm with clamp), 3.3 kg (152 mm)
SCOPE OF SUPPLY
1 fixture
PART REF.
UGC-PL-130
Models & Options
Ø 90 mm wheel — For DIN 53357-B, 2 kg (Specify at order)
Ø 90 mm wheel with clamp — Clamp fixes the specimen to the wheel, DIN 53357-B, 2.05 kg (Specify at order)
Ø 152 mm wheel — For ISO 6133 and IPC-TM-650 2.4.9, 3.3 kg (Specify at order)
Interchangeable roller versions — Special single-arm versions for pipes and O-rings (On request)
Other couplings — Alternatives to the Ø 15.9 mm clevis to suit your machine (On request)
What's Included
1 German wheel peel fixture with the wheel diameter ordered
Specimen clamp on the clamp version only
Female clevis coupling with Ø 15.9 mm (5/8 in) pin as standard
Supported Test Standards
DIN 53357-B — Layer separation (peel) test for plastic sheeting and film, method B
ISO 6133 — Analysis of multi-peak traces from tear and adhesion strength tests
IPC-TM-650 2.4.9 — Peel strength of flexible dielectric materials
Compatible Grips & Fixtures
Motorized tensile testers — Mark-10 F-series testers for tape and film peel forces
5 kN universal testing machine — Galdabini benchtop frame that covers the 4 kN rating
Adapters — Couplings for other machine connections
Plastics testing — Grips and fixtures for plastic films and sheet
Adhesives testing — Other peel and bond test fixtures
“Customer quote”
Related Equipment
UGC-PL-120 90 Degree Adhesive Peel Grip DIN 40802
Six-roller 90° peel fixture that measures the adhesion of flexible films to rigid substrates up to 7 mm thick, rated 2 k
UGC-PL-140 180 Degree Tape Peel Fixture EN 1939
Carrier fixture for 180° peel adhesion tests on self-adhesive tapes to EN 1939, ISO 29862 and FINAT methods, with steel,
UGC-PL-110 Floor and Wall Covering Peel Fixture EN 1372
Floating roller peel fixture for floor and wall covering adhesives to EN 1372 and ISO 22631, with 57, 97 or 157 mm rolle
UGC-PL-150 90 Degree Adhesive Peel Fixture ISO 8510-1
Wire-driven sliding-table fixture that keeps the peel point centered at a constant 90° for flexible-to-rigid adhesive bo
German Wheel Peel Fixture FAQ
What does a German wheel peel fixture do?
It holds the specimen on a free-running wheel. As the flexible layer is pulled, the wheel rotates so the peel angle stays at 90° for the whole test.
Which wheel diameter should I choose?
The Ø 90 mm wheel is for DIN 53357-B work. The Ø 152 mm (6 in) wheel is for ISO 6133 and IPC-TM-650 2.4.9, the method used for flexible dielectric materials.
When do I need the clamp version?
Choose it when the specimen needs to be mechanically fixed to the wheel rather than relying on the bond alone. The clamp is available on the Ø 90 mm wheel.
Can it test pipes or O-rings?
Special single-arm versions with interchangeable rollers are available for pipes and O-rings. Send us your part dimensions and we'll confirm a configuration.
What load does it handle?
All versions are rated for 4 kN (899 lbf), well within a Mark-10 F-series tester or our 5 kN universal testing machine.
How does it connect to my machine?
The standard coupling is a female clevis with Ø 15.9 mm (5/8 in) pin. Other couplings and adapters are available on request.




