top of page

Home  ›  Products  ›  Shear Fixtures  ›  Dental Crown Shear Bond Fixture ISO 10477

UGC-SF-060 dental crown shear bond fixture with graduated slide for ISO 10477 by Universal Grip
UGC-SF-060 dental crown shear bond fixture with graduated slide for ISO 10477 by Universal Grip
UGC-SF-060 Dental Crown Shear Bond Fixture ISO 10477 by Universal Grip, view 2
Product photo 3
Product photo 4

Dental Crown Shear Bond Fixture ISO 10477 – 1 kN

1 kN shear bond fixture for polymer-based crown and veneering materials to ISO 10477, with a graduated slide and screw-adjustable blade holder.

Brand: Universal Grip  |  Model: UGC-SF-060  |  ● Configured to order

  • Shear bond strength testing of crown and veneering materials to ISO 10477

  • 1 kN (about 225 lbf) capacity matched to the low forces of dental bond tests

  • Graduated slide positions the bond interface precisely under the blade

  • Screw-adjustable blade holder for fine height setting

  • Hardened, nickel-plated steel shearing punch

  • Male adapter with Ø 16 mm pin hole; other couplings via adapters

Standards: ISO 10477

Trusted by Global Companies

Shear bond fixture for dental crown and veneering materials

The UGC-SF-060 measures the shear bond strength of polymer-based crown and veneering materials to ISO 10477. Dental material manufacturers, dental laboratories and university research groups use it to check how well a veneering composite bonds to its substrate, and to compare materials, primers and processing routes. Its 1 kN (about 225 lbf) capacity is sized for the low forces these bonds see, so it sits comfortably on small testing machines.

 

How it works

The bonded specimen is clamped in a holder that rides on a graduated slide. The slide moves the specimen until the bond interface lines up with the hardened shearing blade, and the scale lets the operator repeat that position for every specimen in a series. The blade sits in a screw-adjustable holder, so its height can be fine-tuned relative to the interface. When the machine drives the blade down, it loads the interface in shear until the veneering material separates.

In bond strength testing, small alignment errors turn shear into peel or bending, and scatter goes up. The graduated slide and adjustable blade holder are there to keep the blade on the interface and the load as close to pure shear as the specimen allows.

 

Construction

The shearing punch is made of hardened, nickel-plated steel, which keeps its edge across long test series and resists corrosion from the moist specimens dental protocols often use. The fixture connects with a male adapter with a Ø 16 mm (0.63 in) pin hole. Specimens are prepared to ISO 10477 geometry.

A typical series compares groups of specimens, for example two veneering systems, or primed and unprimed substrates. Repeatable positioning is what keeps the difference between those groups visible instead of lost in specimen-to-specimen scatter.

 

Typical applications

  • Dental crown materials

  • Veneering composites

  • Dental laboratories

  • Dental materials research

 

Machine fit

At 1 kN, the fixture fits a Mark-10 F-series tester such as the 300 lb motorized tester (about 1.3 kN), or a Galdabini 2.5 kN benchtop universal testing machine when you want a dedicated materials frame. The coupling to either machine is confirmed with your order, and adapters are available.

 

Related dental fixtures

For adhesion of bonding agents to tooth structure, see the UGC-SF-080 for ISO/TS 11405 and the UGC-SF-310 notched-edge fixture. Tell us your specimen geometry and machine coupling, and we will configure the fixture: request a quote.

Product video

At a glance

  • Test type: Shear bond strength

  • Max. load: 1 kN (225 lbf)

  • Punch: Steel, nickel-plated, hardened

  • Specimen holder: Clamp on graduated slide

  • Blade holder: Screw-adjustable for height

  • Coupling: Male adapter, Ø 16 mm pin hole

Dental Crown Shear Bond Fixture ISO 10477 Specifications

TEST TYPE

Shear bond strength

 

MAX. LOAD

1 kN (225 lbf)

 

PUNCH

Steel, nickel-plated, hardened

 

SPECIMEN HOLDER

Clamp on graduated slide

 

BLADE HOLDER

Screw-adjustable for height

 

COUPLING

Male adapter, Ø 16 mm pin hole

 

SPECIMEN

Per ISO 10477

 

TEMPERATURE RANGE

Ambient

 

DRAWINGS

Dimensional drawings and 3D models on request

 

PART REF.

UGC-SF-060

 

Models & Options

  • ISO 10477 shear bond fixture — 1 kN, graduated slide, adjustable blade holder (Specify at order)

  • Coupling adapters — To fit the Ø 16 mm pin-hole adapter to Mark-10 or other machines (On request)

What's Included

  • Shear bond fixture with specimen clamp on graduated slide

  • Hardened, nickel-plated shearing blade in screw-adjustable holder

  • Male adapter with Ø 16 mm pin hole

Supported Test Standards

  • ISO 10477 — Dentistry – polymer-based crown and veneering materials

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SF-080 Dental Adhesion Shear Fixture ISO TS 11405

UGC-SF-080 Dental Adhesion Shear Fixture ISO TS 11405

Shear fixture for measuring adhesion to tooth structure to ISO/TS 11405, with a cage holder for embedded teeth and a Ø 1

UGC-SF-310 Dental Restorative Bond Shear Fixture ISO 29022

UGC-SF-310 Dental Restorative Bond Shear Fixture ISO 29022

Notched-edge shear fixture for the bond strength of dental restoratives to tooth structure, with a V-block specimen hold

UGC-SF-050 Reinforcing Steel Weld Shear Fixture EN 10080

UGC-SF-050 Reinforcing Steel Weld Shear Fixture EN 10080

50 kN weld shear fixture for welded joints in reinforcing steel to EN 10080, with 6 mm and 9 mm inserts at test angles o

UGC-SF-070 Biomass Shear Fixture

UGC-SF-070 Biomass Shear Fixture

10 kN shear fixture for cylindrical biomass samples such as pellets, briquettes and plant cores, with inserts for 20, 30

Dental Crown Shear Bond Fixture ISO 10477 FAQ

What does the UGC-SF-060 test?

Shear bond strength of polymer-based crown and veneering materials to ISO 10477.

 

What is the maximum load?

1 kN (about 225 lbf), sized for the low forces of dental bond tests.

 

How do I line the blade up with the bond interface?

The specimen clamp rides on a graduated slide, and the blade holder is screw-adjustable for height. Together they put the blade on the interface and let you repeat that position.

 

Can I use it on a Mark-10 force tester?

Yes, capacity-wise it fits testers such as the 300 lb model. The coupling to your machine is confirmed with the order, and adapters are available.

 

Is it suitable for adhesion to tooth structure?

For adhesive bonding to enamel or dentin, the UGC-SF-080 built for ISO/TS 11405 is the closer match.

 

Need help configuring a shear fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page