top of page

Home  ›  Products  ›  Shear Fixtures  ›  Biomass Shear Fixture

UGC-SF-070 biomass shear fixture with housing and punch for cylindrical pellet and briquette samples by Universal Grip
UGC-SF-070 biomass shear fixture with housing and punch for cylindrical pellet and briquette samples by Universal Grip
UGC-SF-070 Biomass Shear Fixture by Universal Grip, view 2
UGC-SF-070 Biomass Shear Fixture by Universal Grip, view 3
Product photo 4

Biomass Shear Fixture – 10 kN

10 kN shear fixture for cylindrical biomass samples such as pellets, briquettes and plant cores, with inserts for 20, 30 and 35 mm sample heights.

Brand: Universal Grip  |  Model: UGC-SF-070  |  ● Configured to order

  • Shear strength of compacted cylindrical biomass samples

  • Rated to 10 kN (about 2,248 lbf) maximum test load

  • Interchangeable inserts for 20, 30 and 35 mm sample heights

  • Nickel-plated steel housing and punch stand up to abrasive, dusty samples

  • Ø 20 mm female clevis coupling for a quick change from other fixtures

  • Sample diameter and height configured to your material at order

Downloads and standards

Trusted by Global Companies

Shear fixture for compacted biomass samples

The UGC-SF-070 measures the shear strength of compacted biomass: wood pellets, briquettes, agricultural residues and cores cut from plant material. Bioenergy producers and research groups use the result to judge how well a compacted fuel holds together through handling, conveying and storage, and to tune pressing parameters, binders and feedstock blends. The fixture is rated to 10 kN (about 2,248 lbf).

 

How it works

The cylindrical sample sits in a nickel-plated steel housing. An upper punch is driven down into the housing and shears the sample, and the peak force gives the shear strength of the compacted material. Because the sample is fully supported by the housing, the test isolates shear failure rather than the crumbling you would see if a pellet were simply crushed between flat platens. The result gives one repeatable number for comparing feedstocks, particle sizes, moisture contents and press settings, and for tracking the same product from batch to batch.

 

Inserts for different sample heights

Biomass samples rarely come in one size. Interchangeable inserts adapt the housing to the sample height:

  • Insert H20: for 20 mm (0.79 in) sample height

  • Insert H30: for 30 mm (1.18 in) sample height

  • Insert H35: for 35 mm (1.38 in) sample height

The data sheet gives the sample size as 52 x 35 mm. If your samples differ, specify diameter and height when you order and the housing and inserts are matched to them. Swapping an insert takes only a moment, so samples of different heights can be run in one session.

 

Construction

Housing and punch are made of nickel-plated steel. Biomass is dusty, often abrasive and sometimes damp, and the plating keeps the bore and punch clean and corrosion-free between test series. The fixture connects with a Ø 20 mm female clevis, and other couplings are available through adapters. It runs at ambient temperature.

 

Typical applications

  • Biomass briquettes

  • Wood pellets

  • Agricultural residues

  • Bioenergy research

 

Machine fit

A 10 kN rating suits a Galdabini 10 kN benchtop universal testing machine. The same frame can run pellet crush tests between compression platens, so one machine covers both durability checks. For softer samples that shear well below 10 kN, a 5 kN frame gives finer resolution. Tell us your sample diameter and height, the material and your machine coupling, and we will configure the housing and inserts: request a quote.

Product video

At a glance

  • Test type: Shear of cylindrical samples

  • Max. load: 10 kN (2,248 lbf)

  • Sample size: 52 x 35 mm

  • Inserts: For 20, 30 and 35 mm sample heights

  • Loading: Upper punch into supporting housing

  • Coupling: Female clevis, Ø 20 mm pin

Biomass Shear Fixture Specifications

TEST TYPE

Shear of cylindrical samples

 

MAX. LOAD

10 kN (2,248 lbf)

 

SAMPLE SIZE

52 x 35 mm

 

INSERTS

For 20, 30 and 35 mm sample heights

 

LOADING

Upper punch into supporting housing

 

COUPLING

Female clevis, Ø 20 mm pin

 

MATERIAL

Steel, nickel-plated

 

TEMPERATURE RANGE

Ambient

 

DRAWINGS

Dimensional drawings and 3D models on request

 

PART REF.

UGC-SF-070

 

Models & Options

  • Insert H20 — For 20 mm sample height (Specify at order)

  • Insert H30 — For 30 mm sample height (Specify at order)

  • Insert H35 — For 35 mm sample height (Specify at order)

  • Other sample sizes — Housing and inserts matched to your sample diameter and height (On request)

  • Coupling adapters — For machines without a Ø 20 mm clevis (On request)

What's Included

  • Shear fixture with nickel-plated steel housing and upper punch

  • Ø 20 mm female clevis coupling

  • Height inserts (H20, H30, H35) specified at order

Supported Test Standards

Standards list

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SF-060 Dental Crown Shear Bond Fixture ISO 10477

UGC-SF-060 Dental Crown Shear Bond Fixture ISO 10477

1 kN shear bond fixture for polymer-based crown and veneering materials to ISO 10477, with a graduated slide and screw-a

UGC-SF-080 Dental Adhesion Shear Fixture ISO TS 11405

UGC-SF-080 Dental Adhesion Shear Fixture ISO TS 11405

Shear fixture for measuring adhesion to tooth structure to ISO/TS 11405, with a cage holder for embedded teeth and a Ø 1

UGC-SF-050 Reinforcing Steel Weld Shear Fixture EN 10080

UGC-SF-050 Reinforcing Steel Weld Shear Fixture EN 10080

50 kN weld shear fixture for welded joints in reinforcing steel to EN 10080, with 6 mm and 9 mm inserts at test angles o

UGC-SF-090 Symmetric Shear Fixture EN 12090

UGC-SF-090 Symmetric Shear Fixture EN 12090

Lightweight anodized aluminum shear fixture for sandwich cores and insulation boards to EN 12090 Fig. 2b, loading two sp

Biomass Shear Fixture FAQ

What kind of samples does the UGC-SF-070 test?

Cylindrical compacted biomass such as wood pellets, briquettes, agricultural residues and plant material cores.

 

What is the maximum load?

10 kN (about 2,248 lbf).

 

What are the H20, H30 and H35 inserts?

Interchangeable inserts that adapt the housing to 20 mm, 30 mm and 35 mm sample heights.

 

My samples are a different size. Can the fixture be adapted?

Yes. Specify sample diameter and height when ordering and the housing and inserts are matched to them.

 

Which machine should I use?

A Galdabini 10 kN benchtop machine matches the rating. The fixture connects with a Ø 20 mm female clevis, and adapters are available.

 

Is there a standard for this test?

The data sheet does not tie the fixture to a specific standard. It is configured to the sample geometry and procedure you use.

 

Need help configuring a shear fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page