top of page

Home  ›  Products  ›  Shear Fixtures  ›  Wood Shear Test Fixture EN 13354

UGC-SF-110 wood shear test fixture with adjustable jaw and 20 mm punch for EN 13354 by Universal Grip
UGC-SF-110 wood shear test fixture with adjustable jaw and 20 mm punch for EN 13354 by Universal Grip
UGC-SF-110 Wood Shear Test Fixture EN 13354 by Universal Grip, view 2
UGC-SF-110 Wood Shear Test Fixture EN 13354 by Universal Grip, view 3
Product photo 4

Wood Shear Test Fixture EN 13354 – 5 kN

5 kN compression shear fixture for wood and bonded solid wood panels to EN 13354, with a 10–60 mm adjustable jaw and Ø 20 mm punch.

Brand: Universal Grip  |  Model: UGC-SF-110  |  ● Configured to order

  • Shear testing of wood and bonded solid wood panels to EN 13354

  • Adjustable jaw opening of 10–60 mm (0.39–2.36 in) for specimen thickness

  • Ø 20 mm (0.79 in) punch introduces the shear load

  • Rated to 5 kN (about 1,124 lbf); works in compression mode

  • Corrosion-resistant nickel-plated steel construction

  • Ø 20 mm female clevis coupling; lower compression platen recommended

Standards: EN 13354

Trusted by Global Companies

Compression shear fixture for wood and bonded wood panels

The UGC-SF-110 tests the shear strength of wood and bonded solid wood panels to EN 13354. Panel producers, glulam and engineered timber manufacturers and wood adhesive suppliers use it to check bond line quality on production samples and to qualify new adhesives and pressing schedules. It is rated to 5 kN (about 1,124 lbf) and runs in compression.

 

How it works

The specimen is clamped in an adjustable jaw, and a Ø 20 mm (0.79 in) punch drives the shear load through it as the crosshead moves down. The fixture sits on a lower compression platen, so the jaw is supported directly beneath the load path. Working in compression keeps setup simple: there is no specimen to thread into a tensile grip, and the fixture can stay in place while one specimen after another is loaded.

 

Jaw opening and construction

The jaw opening adjusts from 10 to 60 mm (0.39 to 2.36 in), which covers a wide range of panel and lamella thicknesses without changing hardware. One fixture can follow a lab from thin lamellae to thick panel stock without a second set of jaws. The fixture is made of nickel-plated steel for corrosion resistance, a practical point when specimens come out of soak or boil conditioning still wet. It connects with a Ø 20 mm female clevis and is used at ambient temperature.

A lower compression platen is recommended for the setup. Tell us whether you already have one that suits your machine, or whether it should be supplied with the fixture.

 

Typical applications

  • Solid wood panels

  • Glued laminated timber

  • Wood adhesives

  • Timber research labs

 

Related wood shear methods

Some wood bond tests use a different specimen and tool. Block shear of adhesive bonds to ASTM D905 and shear parallel to grain in ASTM D143 each have their own geometry, so ask us before using this fixture for those methods. For glue bond quality of plywood to EN 314-1, the UGC-SF-160 plywood fixture is the dedicated tool.

 

Machine fit

A Galdabini 5 kN benchtop universal testing machine matches the rating. The 5 kN load also sits within the range of Mark-10 1,500 lbf motorized testers (6.7 kN), with the coupling handled by adapters. Tell us your specimen thickness, machine coupling and whether you need the lower compression platen, and we will configure the fixture: request a quote.

Product video

At a glance

  • Test type: Shear, compression mode

  • Max. load: 5 kN (1,124 lbf)

  • Jaw opening: 10–60 mm (0.39–2.36 in)

  • Punch diameter: 20 mm (0.79 in)

  • Coupling: Female clevis, Ø 20 mm pin

  • Material: Steel, nickel-plated

Wood Shear Test Fixture EN 13354 Specifications

TEST TYPE

Shear, compression mode

 

MAX. LOAD

5 kN (1,124 lbf)

 

JAW OPENING

10–60 mm (0.39–2.36 in)

 

PUNCH DIAMETER

20 mm (0.79 in)

 

COUPLING

Female clevis, Ø 20 mm pin

 

MATERIAL

Steel, nickel-plated

 

TEMPERATURE RANGE

Ambient

 

ACCESSORY

Lower compression platen recommended

 

STANDARD

EN 13354

 

DRAWINGS

Dimensional drawings and 3D models on request

 

PART REF.

UGC-SF-110

 

Models & Options

  • EN 13354 wood shear fixture — 5 kN, 10–60 mm jaw, Ø 20 mm punch, Ø 20 mm female clevis (Specify at order)

  • Lower compression platen — Recommended support for the fixture (Specify at order)

  • Coupling adapters — For Mark-10 testers or other machines (On request)

What's Included

  • Wood shear fixture with adjustable 10–60 mm jaw and Ø 20 mm punch

  • Ø 20 mm female clevis coupling

  • Lower compression platen recommended; specify at order whether it is required

Supported Test Standards

  • EN 13354 — Solid wood panels – bonding quality – test method

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SF-160 Plywood Glue Bond Shear Fixture EN 314-1

UGC-SF-160 Plywood Glue Bond Shear Fixture EN 314-1

Compact compression shear fixture with polyamide jaws for checking the glue bond quality of plywood specimens to EN 314-

UGC-SF-100 Thermal Barrier Profile Shear Fixture EN 14024

UGC-SF-100 Thermal Barrier Profile Shear Fixture EN 14024

10 kN fixture for longitudinal shear of thermally broken metal profiles to EN 14024 Fig. 5, giving shear strength and el

UGC-SF-120 Double Shear Fastener Fixture NASM 1312-13

UGC-SF-120 Double Shear Fastener Fixture NASM 1312-13

Compression-mode double shear fixture that cuts fasteners up to 6.3 mm diameter across two planes for NASM 1312-13 shear

UGC-SF-090 Symmetric Shear Fixture EN 12090

UGC-SF-090 Symmetric Shear Fixture EN 12090

Lightweight anodized aluminum shear fixture for sandwich cores and insulation boards to EN 12090 Fig. 2b, loading two sp

Wood Shear Test Fixture EN 13354 FAQ

What does the UGC-SF-110 test?

The shear strength of wood and bonded solid wood panels to EN 13354.

 

What specimen thicknesses fit?

The jaw opening adjusts from 10 to 60 mm (0.39 to 2.36 in).

 

Does it work in tension or compression?

Compression. The Ø 20 mm punch drives the shear load as the crosshead moves down, with the fixture on a lower compression platen.

 

Do I need a lower compression platen?

It is recommended. Tell us when ordering whether you need one supplied; see our compression platens.

 

Can I use it for ASTM D905 block shear?

ASTM D905 uses its own specimen and shearing tool geometry, so check with us first. Our ASTM D905 guide explains that method.

 

Which machine does it fit?

A Galdabini 5 kN benchtop machine, or a Mark-10 1,500 lbf tester with an adapter.

 

Need help configuring a shear fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page