top of page

Home  ›  Products  ›  Shear Fixtures  ›  Thermal Barrier Profile Shear Fixture EN 14024

UGC-SF-100 thermal barrier profile shear fixture for EN 14024 window and facade profile testing by Universal Grip
UGC-SF-100 thermal barrier profile shear fixture for EN 14024 window and facade profile testing by Universal Grip
UGC-SF-100 Thermal Barrier Profile Shear Fixture EN 14024 by Universal Grip, view 2
UGC-SF-100 Thermal Barrier Profile Shear Fixture EN 14024 by Universal Grip, view 3
UGC-SF-100 Thermal Barrier Profile Shear Fixture EN 14024 by Universal Grip, view 4

Thermal Barrier Profile Shear Fixture EN 14024

10 kN fixture for longitudinal shear of thermally broken metal profiles to EN 14024 Fig. 5, giving shear strength and elasticity constant.

Brand: Universal Grip  |  Model: UGC-SF-100  |  ● Configured to order

  • Longitudinal shear test of thermal barrier profiles to DIN EN 14024, Fig. 5

  • Determines both shear strength and elasticity constant

  • Rated to 10 kN (about 2,248 lbf) maximum test load

  • Holds the profile so the two metal shells move relative to each other

  • Corrosion-resistant nickel-coated steel construction

  • Ø 30 mm female clevis coupling; adapters on request

Standards: EN 14024

Trusted by Global Companies

Shear fixture for thermally broken window, door and facade profiles

The UGC-SF-100 determines the shear strength and elasticity constant of metal profiles with thermal barrier to DIN EN 14024, Fig. 5. Window, door and curtain wall system makers, profile extruders and insulating bar suppliers use the test to show that the connection between the inner and outer metal shells will carry the shear loads a frame sees in service.

 

How it works

A thermally broken profile is two metal shells joined by an insulating bar, typically polyamide. The fixture holds a section of profile so that one shell is restrained and the other is pushed along its length. That displaces the shells relative to each other and loads the insulating bar and its crimped or bonded joints in longitudinal shear. The peak force gives the shear strength; the slope of the force-displacement curve in the elastic range gives the elasticity constant, both of which EN 14024 uses to characterize the composite profile.

 

Construction

The fixture is made of nickel-coated steel for corrosion resistance and a long service life. It is rated to 10 kN (about 2,248 lbf) and connects with a Ø 30 mm (1.18 in) female clevis. Specimen length is set to EN 14024. Because profile cross-sections vary widely between systems, tell us your profile cross-section and specimen length when you order and the fixture is matched to them.

 

Test temperature

The standard version is for ambient temperature, with other ranges on request. If your program includes conditioned tests at low or high temperature, say so in your inquiry and we will configure the fixture and recommend a suitable environmental chamber for your frame.

 

Typical applications

  • Window and door profiles

  • Facade systems

  • Thermally broken aluminum

  • Polyamide insulating bars

Labs typically run the test when introducing a new insulating bar, a new crimping or rolling setup or a new profile series, and as periodic checks on running profile lines.

 

Machine fit

A Galdabini 10 kN benchtop universal testing machine matches the fixture's rating and gives the displacement resolution the elasticity constant calls for. Where a lab also runs transverse tensile tests on the same profiles, a 25 kN frame leaves room for both. Frames with a different coupling connect through adapters. Send us your profile cross-section, specimen length, test temperatures and machine coupling, and we will configure the fixture: request a quote.

Product video

At a glance

  • Test type: Longitudinal shear of thermal barrier profiles

  • Arrangement: DIN EN 14024, Fig. 5

  • Results: Shear strength and elasticity constant

  • Max. load: 10 kN (2,248 lbf)

  • Specimens: Metal profiles with thermal barrier

  • Specimen length: Per EN 14024

Thermal Barrier Profile Shear Fixture EN 14024 Specifications

TEST TYPE

Longitudinal shear of thermal barrier profiles

 

ARRANGEMENT

DIN EN 14024, Fig. 5

 

RESULTS

Shear strength and elasticity constant

 

MAX. LOAD

10 kN (2,248 lbf)

 

SPECIMENS

Metal profiles with thermal barrier

 

SPECIMEN LENGTH

Per EN 14024

 

COUPLING

Female clevis, Ø 30 mm pin

 

MATERIAL

Steel, nickel-coated

 

TEMPERATURE RANGE

Ambient (other ranges on request)

 

DRAWINGS

Dimensional drawings and 3D models on request

 

PART REF.

UGC-SF-100

 

Models & Options

  • EN 14024 shear fixture — Matched to your profile cross-section and specimen length (Specify at order)

  • Non-ambient version — For conditioned tests at other temperatures (On request)

  • Coupling adapters — For machines without a Ø 30 mm clevis (On request)

What's Included

  • EN 14024 Fig. 5 shear fixture in nickel-coated steel

  • Ø 30 mm female clevis coupling

  • Profile-specific setup agreed at order

Supported Test Standards

  • EN 14024 — Metal profiles with thermal barrier – mechanical performance, requirements and tests

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SF-090 Symmetric Shear Fixture EN 12090

UGC-SF-090 Symmetric Shear Fixture EN 12090

Lightweight anodized aluminum shear fixture for sandwich cores and insulation boards to EN 12090 Fig. 2b, loading two sp

UGC-SF-110 Wood Shear Test Fixture EN 13354

UGC-SF-110 Wood Shear Test Fixture EN 13354

5 kN compression shear fixture for wood and bonded solid wood panels to EN 13354, with a 10–60 mm adjustable jaw and Ø 2

UGC-SF-080 Dental Adhesion Shear Fixture ISO TS 11405

UGC-SF-080 Dental Adhesion Shear Fixture ISO TS 11405

Shear fixture for measuring adhesion to tooth structure to ISO/TS 11405, with a cage holder for embedded teeth and a Ø 1

UGC-SF-120 Double Shear Fastener Fixture NASM 1312-13

UGC-SF-120 Double Shear Fastener Fixture NASM 1312-13

Compression-mode double shear fixture that cuts fasteners up to 6.3 mm diameter across two planes for NASM 1312-13 shear

Thermal Barrier Profile Shear Fixture EN 14024 FAQ

What does the UGC-SF-100 measure?

The longitudinal shear strength and elasticity constant of metal profiles with thermal barrier, using the arrangement of DIN EN 14024, Fig. 5.

 

How is the profile loaded?

One metal shell is held while the other is displaced along the profile, loading the insulating bar in longitudinal shear.

 

What is the maximum load?

10 kN (about 2,248 lbf).

 

Can it test at low or high temperature?

The standard version is for ambient temperature. Other ranges are on request, used with an environmental chamber.

 

Will it fit my profile?

Profile cross-sections vary, so tell us yours and the specimen length when ordering and the fixture is matched to it.

 

Which machine should I use?

A Galdabini 10 kN benchtop machine. The fixture has a Ø 30 mm female clevis, and adapters are available.

 

Need help configuring a shear fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page