Home › Products › Shear Fixtures › Symmetric Shear Fixture EN 12090





Symmetric Shear Fixture EN 12090 – 10 kN
Lightweight anodized aluminum shear fixture for sandwich cores and insulation boards to EN 12090 Fig. 2b, loading two specimens symmetrically.
Brand: Universal Grip | Model: UGC-SF-090 | ● Configured to order
Symmetric double-specimen arrangement to EN 12090, Fig. 2b
Symmetric loading eliminates bending moments in the specimens
Accepts carrier plates up to 300 mm (11.8 in) high
Rated to 10 kN (about 2,248 lbf)
Anodized aluminum construction keeps the fixture light to handle
Female clevis Ø 15.9 mm (5/8 in) or Ø 31.8 mm (1-1/4 in); others via adapter
Standards: EN 12090
Trusted by Global Companies


























Symmetric shear fixture for sandwich cores and insulation boards
The UGC-SF-090 determines the shear behavior of sandwich core materials and thermal insulation boards to EN 12090, using the symmetric arrangement of Fig. 2b. It is aimed at building products manufacturers and test labs working with foam cores, mineral and polymer insulation boards and composite panels, where shear strength and shear modulus feed directly into panel design.
How it works
Two specimens are bonded between carrier plates and loaded symmetrically: the central plate moves relative to the outer plates, so both specimens are sheared at the same time and in mirror image. With the load path running down the center line, the bending moments that a single-specimen setup has to manage simply cancel out. The specimens see shear, and the measured force splits evenly between them.
Construction and capacity
The fixture is made of anodized aluminum. Insulation boards and foam cores are tested in fairly large sizes, and a light fixture makes it easier to mount bonded assemblies without disturbing the specimens. It accepts carrier plates up to 300 mm (11.8 in) high and is rated to 10 kN (about 2,248 lbf), which is ample for the low-density materials EN 12090 covers. Carrier plates are available; tell us your specimen and plate dimensions when you order.
Two couplings are offered: a female clevis for a Ø 15.9 mm (5/8 in) pin or for a Ø 31.8 mm (1-1/4 in) pin. Other connections are handled with adapters. The fixture is used at ambient temperature.
Typical applications
Sandwich core materials
Thermal insulation boards
Foam cores
Building products
Symmetric or single-specimen?
EN 12090 also allows a single-specimen arrangement between two plates. If that is what your lab runs, or if you test sandwich cores to ASTM C273 or ISO 1922, the UGC-SF-140 shear fixture with cardan joints is the better fit, with parallel and angled versions. Choose the UGC-SF-090 when you want the symmetric Fig. 2b layout and no bending in the result. More background on core and foam testing is on our foam testing page.
Machine fit
A Galdabini 10 kN benchtop universal testing machine matches the fixture's rating, and a 5 kN frame gives finer force resolution for very soft cores. Tell us your specimen and carrier plate dimensions and your machine coupling (Ø 15.9 mm or Ø 31.8 mm), and we will configure the fixture: request a quote.
Symmetric Shear Fixture EN 12090 Specifications
TEST TYPE
Shear, symmetric double-specimen
ARRANGEMENT
EN 12090, Fig. 2b
MAX. LOAD
10 kN (2,248 lbf)
CARRIER PLATE HEIGHT
Max. 300 mm (11.8 in)
COUPLING
Female clevis Ø 15.9 mm or Ø 31.8 mm; others via adapter
MATERIAL
Aluminum, anodized
TEMPERATURE RANGE
Ambient
SCOPE
Fixture; carrier plates available
DRAWINGS
Dimensional drawings and 3D models on request
PART REF.
UGC-SF-090
Models & Options
Symmetric shear fixture, Ø 15.9 mm clevis — Female clevis for 5/8 in pin (Specify at order)
Symmetric shear fixture, Ø 31.8 mm clevis — Female clevis for 1-1/4 in pin (Specify at order)
Carrier plates — Sized to your specimen, max. 300 mm high (On request)
Coupling adapters — For other machine connections (On request)
What's Included
Symmetric shear fixture in anodized aluminum
Female clevis coupling, Ø 15.9 mm or Ø 31.8 mm as ordered
Carrier plates available separately; confirm sizes and quantity at quote
Supported Test Standards
EN 12090 — Thermal insulating products for building applications – determination of shear behavior
Compatible Grips & Fixtures
10 kN Benchtop Universal Testing Machine — Galdabini frame matched to the 10 kN rating
UGC-SF-140 Shear Fixture with Cardan Joints — Single-specimen plate shear for ISO 1922 and ASTM C273
Foam Testing — Fixtures for foam cores and insulation
Shear Testing — Shear test methods and fixtures
Adapters — Couplings for other machines
“Customer quote”
Related Equipment
UGC-SF-140 Shear Fixture with Cardan Joints ISO 1922
Self-aligning shear fixture with two cardan joints for sandwich cores, rigid foams and adhesive joints, in parallel, ang
UGC-SF-080 Dental Adhesion Shear Fixture ISO TS 11405
Shear fixture for measuring adhesion to tooth structure to ISO/TS 11405, with a cage holder for embedded teeth and a Ø 1
UGC-SF-100 Thermal Barrier Profile Shear Fixture EN 14024
10 kN fixture for longitudinal shear of thermally broken metal profiles to EN 14024 Fig. 5, giving shear strength and el
UGC-SF-070 Biomass Shear Fixture
10 kN shear fixture for cylindrical biomass samples such as pellets, briquettes and plant cores, with inserts for 20, 30
Symmetric Shear Fixture EN 12090 FAQ
Which part of EN 12090 does the UGC-SF-090 follow?
The symmetric double-specimen arrangement shown in EN 12090, Fig. 2b.
Why use a symmetric arrangement?
Two specimens are sheared in mirror image, so bending moments cancel and the specimens see shear only.
How large can the specimens be?
The fixture accepts carrier plates up to 300 mm (11.8 in) high. Specimen and plate dimensions are specified at order.
Are carrier plates included?
Carrier plates are available. We confirm sizes and quantity with your quote.
Can I use it for ASTM C273?
ASTM C273 uses a single specimen between two plates. The UGC-SF-140 is built for that; see our ASTM C273 guide.
Which couplings are offered?
A female clevis for a Ø 15.9 mm or a Ø 31.8 mm pin. Adapters cover other machines.




