top of page

Home  ›  Products  ›  Shear Fixtures  ›  Plywood Glue Bond Shear Fixture EN 314-1

UGC-SF-160 plywood glue bond shear fixture with polyamide jaws for EN 314-1 by Universal Grip
Product photo 1
Product photo 2
Product photo 3
Product photo 4

Plywood Glue Bond Shear Fixture EN 314-1

Compact compression shear fixture with polyamide jaws for checking the glue bond quality of plywood specimens to EN 314-1, rated 10–20 kN.

Brand: Universal Grip  |  Model: UGC-SF-160  |  ● Configured to order

  • Compression shear test of plywood glue lines per DIN EN 314-1

  • Polyamide jaws hold the notched specimen without marking the veneer

  • 25 mm (about 1 in) jaw opening for standard plywood specimens

  • Rated for maximum loads of 10–20 kN (2,248–4,496 lbf)

  • Weighs 0.4 kg and sits directly on the lower compression platen

  • Nickel-plated steel body, 0 to +70 °C operating range

Standards: EN 314-1

Trusted by Global Companies

Glue bond quality testing for plywood panels

The UGC-SF-160 is a small compression shear fixture for plywood mills, adhesive suppliers and timber labs that verify bonding quality to DIN EN 314-1. A notched plywood specimen is clamped between polyamide jaws with a 25 mm opening, and the fixture is compressed between upper and lower platens until the glue line between the veneers shears. The failure load, together with the visual wood failure on the sheared surface, is what the bonding quality assessment is built on.

 

How it works

The fixture has no clevis or thread. It is placed directly on the lower compression platen, the upper platen comes down on it, and the specimen is loaded across the notched glue line. Polyamide jaws grip the face veneers firmly without crushing or marking them, so the fracture surface stays readable for the wood failure estimate. The body is nickel-plated steel, which resists corrosion from specimens that have been soaked or boiled during pre-treatment.

At 0.4 kg the fixture is easy to handle and quick to load, which matters on a production QC bench where many specimens are tested per panel.

 

What you need to run it

  • Upper and lower compression platens for your machine, ordered separately

  • A universal testing machine with at least the fixture's working load; a 25 kN benchtop machine covers the full 20 kN rating, and a 10 kN frame suits programs whose failure loads stay below 10 kN

  • Your specimen thickness, so the jaws are set up for it

The operating range is 0 to +70 °C; other ranges on request.

 

Typical applications

  • Plywood panel production QC

  • Other veneer-based panels

  • Development and qualification of wood adhesives

  • Comparing bond lines after different pre-treatments

 

Related wood shear fixtures

For shear testing of solid and bonded wood to EN 13354, see UGC-SF-110, the wood shear test fixture. For block-shear testing of adhesive bonds in wood, our ASTM D905 guide explains the method and the hardware it uses. More options are on our shear fixtures and adhesives testing pages.

Tell us the plywood thickness and your machine, and we will quote the fixture together with matching platens.

Product video

At a glance

  • Test type: Compression shear of glue lines

  • Max. load: 10–20 kN

  • Opening: 25 mm

  • Body: Steel, nickel-plated

  • Jaws: Polyamide

  • Coupling: None – used between compression platens

Plywood Glue Bond Shear Fixture EN 314-1 Specifications

TEST TYPE

Compression shear of glue lines

 

MAX. LOAD

10–20 kN

 

OPENING

25 mm

 

BODY

Steel, nickel-plated

 

JAWS

Polyamide

 

COUPLING

None – used between compression platens

 

TEMPERATURE RANGE

0 … +70 °C (others on request)

 

WEIGHT

0.4 kg (without platens)

 

SCOPE OF DELIVERY

1 fixture; compression platens ordered separately

 

STANDARD

EN 314-1

 

PART REF.

UGC-SF-160

 

Models & Options

  • Glue bond shear fixture — 25 mm opening, polyamide jaws; state specimen thickness (Specify at order)

  • Upper and lower compression platens — Sized to your machine and load cell (On request)

What's Included

  • 1 compression shear fixture with polyamide jaws

  • Upper and lower compression platens are not included – order to suit your machine

Supported Test Standards

  • EN 314-1 — Plywood – bonding quality – Part 1: test methods

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SF-110 Wood Shear Test Fixture EN 13354

UGC-SF-110 Wood Shear Test Fixture EN 13354

5 kN compression shear fixture for wood and bonded solid wood panels to EN 13354, with a 10–60 mm adjustable jaw and Ø 2

UGC-SF-150 Ceramic Composite Shear Fixture

UGC-SF-150 Ceramic Composite Shear Fixture

Compression shear fixture for notched fiber-reinforced ceramic specimens up to 10 mm thick, rated to 10 kN, for ASTM C12

UGC-SF-170 Adhesive Shear Strength Fixture ISO 13445

UGC-SF-170 Adhesive Shear Strength Fixture ISO 13445

Block-shear fixture for adhesive bonds between rigid substrates, rated to 20 kN, with interchangeable inserts for ASTM D

UGC-SF-140 Shear Fixture with Cardan Joints ISO 1922

UGC-SF-140 Shear Fixture with Cardan Joints ISO 1922

Self-aligning shear fixture with two cardan joints for sandwich cores, rigid foams and adhesive joints, in parallel, ang

Plywood Glue Bond Shear Fixture EN 314-1 FAQ

What does the UGC-SF-160 test?

The shear strength of the glue line in plywood, used to assess bonding quality to EN 314-1.

 

Does the fixture need a coupling?

No. It sits on the lower compression platen and is loaded by the upper platen; both platens are ordered separately.

 

Why polyamide jaws?

Polyamide grips the face veneers firmly without marking them, so the sheared surface stays clean for the wood failure assessment.

 

What specimen thickness fits?

The jaw opening is 25 mm (about 1 in). State your specimen thickness when ordering so the fixture is set up for it.

 

What load capacity does it have?

It is rated for maximum loads of 10–20 kN (2,248–4,496 lbf). A 25 kN benchtop machine covers the full range.

 

Can I use it for solid wood shear tests?

It is designed for plywood glue lines. For solid and bonded wood to EN 13354, see UGC-SF-110.

 

Need help configuring a shear fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page