Home › Products › Shear Fixtures › Warner-Bratzler Meat Shear Fixture





Warner-Bratzler Meat Shear Fixture
V-notch blade shear fixture for measuring meat tenderness on cores up to 25 mm diameter, rated to 2 kN and built in stainless steel.
Brand: Universal Grip | Model: UGC-SF-130 | ● Configured to order
Warner-Bratzler geometry: 1 mm V-notch blade with 0.5 mm cutting radius
Accepts cylindrical meat cores up to 25 mm (about 1 in) diameter
Rated to 2 kN (450 lbf) – fits motorized force testers and small benchtop frames
Stainless steel blade and guide for food contact and quick cleaning
Standard tension-mode version or guided compression-mode version
Female clevis Ø 15.9 mm or Ø 20 mm; other couplings on request
Downloads and standards
Trusted by Global Companies


























Warner-Bratzler shear force testing for meat tenderness
The UGC-SF-130 gives meat processors, food research labs and universities an instrumental tenderness value to set beside sensory panel scores. A cylindrical core of meat is cut by a V-notch blade and the peak force recorded during the cut, the Warner-Bratzler shear force, is the result: the lower the force, the more tender the sample. Because the geometry is fixed, values can be compared across batches, cuts, aging times and cooking methods.
Blade and guide
The blade is 1 mm thick with a V-notch and a 0.5 mm cutting radius, the profile the method is known by. It runs through a slotted guide that keeps the core square to the blade so every sample is cut the same way. Cores up to 25 mm (about 1 in) diameter fit the notch. Blade and guide are stainless steel, suitable for food contact and easy to wipe down or wash between samples.
Two versions
Standard version – runs in tension mode with the slotted blade guide.
Special version – runs in compression mode, with a specimen support and blade guides, for labs that prefer to push the blade down through the core.
State which version you need when ordering, along with your machine coupling.
Machine fit
With a 2 kN (450 lbf) rating, the fixture sits comfortably on motorized force testers in the Mark-10 F-series class (100–1,500 lbF), such as our 500 lb tensile tester and 750 lb tensile tester. Research labs that also run other texture tests often choose a 2.5 kN benchtop universal testing machine. The standard coupling is a female clevis with a Ø 15.9 mm (5/8 in) or Ø 20 mm pin; other couplings and adapters are available. The operating range is 0 to +70 °C (32 to 158 °F); other ranges on request.
Typical applications
Tenderness of whole-muscle meat cuts
Poultry and fish texture
Benchmarking plant-based meat analogues against animal protein
Product development and shelf-life studies in food research labs
For multi-blade cutting of bulk samples, see UGC-SF-260, the Kramer shear cell, and the rest of our food testing fixtures. Tell us your core size, tester and coupling, and we will configure and quote the fixture.
Warner-Bratzler Meat Shear Fixture Specifications
TEST TYPE
Shear / cutting force
MAX. LOAD
2 kN (450 lbf)
MAX. SPECIMEN DIAMETER
25 mm
BLADE
V-notch, 1 mm thick, 0.5 mm cutting radius
BLADE GUIDE
Slotted (standard version)
COUPLING
Female clevis Ø 15.9 mm or Ø 20 mm; others on request
MATERIAL
Stainless steel
TEMPERATURE RANGE
0 … +70 °C (others on request)
WEIGHT
2.2 kg
DRAWINGS
Dimensional drawings on data sheet; 3D models on request
PART REF.
UGC-SF-130
Models & Options
Standard version — Tension mode, slotted blade guide (Specify at order)
Special version — Compression mode with specimen support and blade guides (Specify at order)
Clevis coupling — Female, Ø 15.9 mm or Ø 20 mm pin (Specify at order)
Other couplings or temperature ranges — Built to suit your machine and test conditions (On request)
What's Included
Warner-Bratzler fixture with V-notch blade and guide, in the version ordered
Coupling as specified (Ø 15.9 mm or Ø 20 mm female clevis)
Adapters for other machine couplings available on request
Supported Test Standards
Standards list
Compatible Grips & Fixtures
Food testing fixtures — Cutting, texture and compression fixtures for food
Motorized tensile testers — Force testers well within the 2 kN rating
750 lb tensile tester — Motorized tester with headroom for tough cuts
2.5 kN benchtop testing machine — Galdabini frame for research texture labs
Software — Peak force capture and batch reporting
Adapters — Fit other machine couplings
“Customer quote”
Related Equipment
UGC-SF-260 Kramer Shear Cell for Food
Ten-blade Kramer shear-compression cell for measuring the firmness of fruit, vegetables, meat and processed foods, rated
UGC-SF-120 Double Shear Fastener Fixture NASM 1312-13
Compression-mode double shear fixture that cuts fasteners up to 6.3 mm diameter across two planes for NASM 1312-13 shear
UGC-SF-140 Shear Fixture with Cardan Joints ISO 1922
Self-aligning shear fixture with two cardan joints for sandwich cores, rigid foams and adhesive joints, in parallel, ang
UGC-SF-110 Wood Shear Test Fixture EN 13354
5 kN compression shear fixture for wood and bonded solid wood panels to EN 13354, with a 10–60 mm adjustable jaw and Ø 2
Warner-Bratzler Meat Shear Fixture FAQ
What does a Warner-Bratzler test measure?
The peak force needed to cut a cylindrical meat core with a V-notch blade. Lower shear force indicates more tender meat.
What size samples does the fixture take?
Cores up to 25 mm (about 1 in) diameter.
Which version should I order?
The standard version runs in tension mode with a slotted blade guide. Choose the special version to work in compression mode with a specimen support and blade guides.
Will it run on a motorized force tester?
Yes. The 2 kN (450 lbf) rating suits our motorized tensile testers, and the fixture also fits small benchtop universal testing machines.
Is it suitable for food contact?
Yes. It is made of stainless steel and is easy to clean between samples.
Can I test meat analogues and fish?
Yes. Poultry, fish and plant-based meat analogues are typical applications alongside red meat. See our food testing fixtures for other texture methods.




