Home › Products › Shear Fixtures › O-Ring Composite Shear Fixture





O-Ring Composite Shear Fixture – 70–170 mm Rings, 50 kN
Special shear fixture for ring-shaped composite samples 70 to 170 mm in diameter, with stepped seats on two steel blocks, rated to 50 kN.
Brand: Universal Grip | Model: UGC-SF-270 | ● Configured to order
Accepts ring-shaped samples from 70 to 170 mm (2.76–6.69 in) in diameter
Stepped seats locate each ring at its matching radius
Upper block shears the ring section as the machine applies load
Rated to 50 kN (11,240 lbf) maximum test load
Nickel-plated steel upper and lower quarter-circle blocks
Clevis pin connection on both halves; other sizes via adapters
Downloads and standards
Trusted by Global Companies


























Shear fixture for composite rings and ring-shaped parts
The UGC-SF-270 is a special fixture for shear testing ring-shaped composite samples, similar in form to O-rings, from 70 to 170 mm (2.76 to 6.69 in) in diameter. It is aimed at manufacturers and labs working with composite rings, filament-wound parts, seals and gaskets, and custom components where a flat coupon cannot stand in for the real part.
How it works
The fixture consists of two quarter-circle steel blocks with stepped seats. Each step corresponds to a ring radius, so the ring is set into the step that matches its diameter and is supported along an arc rather than at a few points. As the testing machine applies load, the upper block moves against the lower block and shears the ring section between them. Both blocks connect to the machine through a clevis pin.
Because one pair of blocks covers the whole 70–170 mm range, a lab working through several ring sizes can stay on the same fixture instead of building a holder for every diameter.
At a glance
Max. load: 50 kN (11,240 lbf)
Sample diameter: 70–170 mm
Material: nickel-plated steel
Coupling: clevis pin on both halves; other sizes via adapters
Temperature: ambient; other ranges on request
Ordering a ring fixture
Rings differ in cross-section as well as diameter, so please give us the ring diameter, the cross-section and the expected maximum load when you ask for a quote. We will confirm that the seat geometry suits your part, and dimensional drawings or 3D models are available on request. Custom versions can be made where your rings fall outside the standard range.
Machine fit
At 50 kN the fixture pairs with a 50 kN benchtop universal testing machine; Galdabini floor-standing UTMs suit labs that test a wider mix of parts. Where your crosshead coupling differs from the fixture's clevis, use one of our adapters.
For flat composite coupons, see the other composite tooling on our shear fixtures page, including the UGC-SF-040 Arcan fixture for shear and mixed-mode tests.
Send us your ring dimensions and machine coupling, and we will quote the fixture.
O-Ring Composite Shear Fixture Specifications
TEST TYPE
Shear of ring-shaped samples
MAX. LOAD
50 kN (11,240 lbf)
SAMPLE DIAMETER
70–170 mm (2.76–6.69 in)
SAMPLE LOCATION
Stepped seats on two quarter-circle blocks
COUPLING
Clevis pin coupling on both halves; other sizes via adapters
MATERIAL
Steel, nickel-plated
TEMPERATURE RANGE
Ambient (other ranges on request)
DRAWINGS
Dimensional drawings and 3D models on request
PART REF.
UGC-SF-270
Models & Options
Standard fixture — Upper and lower stepped blocks for rings 70–170 mm (Specify at order)
Custom ring sizes — Seats for diameters or cross-sections outside the standard range (On request)
Coupling adapters — To fit the clevis to other machine connections (On request)
Other temperature ranges — Beyond ambient (On request)
What's Included
Upper and lower quarter-circle steel blocks with stepped seats
Clevis pin connections on both halves
Adapters for other coupling sizes on request
Supported Test Standards
Standards list
Compatible Grips & Fixtures
50 kN Benchtop UTM — Matches the 50 kN rating
Floor-Standing UTMs — Galdabini frames for mixed component testing
Adapters — Fit the clevis pin coupling to your machine
Shear Testing — Overview of shear methods and fixtures
“Customer quote”
Related Equipment
UGC-SF-040 Arcan Shear Test Fixture
Angle-adjustable Arcan fixture for pure shear and mixed-mode tests on composites, clear wood and bonded joints, in 20 kN
UGC-SF-260 Kramer Shear Cell for Food
Ten-blade Kramer shear-compression cell for measuring the firmness of fruit, vegetables, meat and processed foods, rated
UGC-SF-280 Spinal Implant Compression-Shear Fixture
Compression-shear fixture for intervertebral body fusion devices to ASTM F2077, with an inclined loading block and a gra
UGC-SF-250 V-Notched Rail Shear Fixture
Pair of V-notched rail shear grips for composites to ASTM D7078, in 50 kN and 100 kN versions plus a -100 to +600 °C hig
O-Ring Composite Shear Fixture FAQ
What ring sizes does the fixture accept?
Ring-shaped samples from 70 to 170 mm in diameter. Rings outside that range can be handled with a custom version on request.
How does the fixture locate different ring diameters?
Two quarter-circle blocks carry stepped seats, and each ring sits in the step that matches its radius.
What is the maximum test load?
50 kN (11,240 lbf).
Can it test seals and gaskets as well as composite rings?
Yes. Seals and gaskets, filament-wound parts and custom ring-shaped components are all typical applications.
What do you need from me to quote?
The ring diameter and cross-section, the expected maximum load and your machine coupling.
How does it connect to my machine?
Both halves use a clevis pin coupling. Other sizes are available through our adapters.




