Home › Products › Shear Fixtures › Plastic-Metal Assembly Adhesion Fixture





Plastic-Metal Assembly Adhesion Fixture – ISO 19095-3, 150 kN
Tensile adhesion fixture for plastic-metal assemblies to ISO 19095-3, Fig. 1, with a lever-operated roller grip and an articulating lower holder.
Brand: Universal Grip | Model: UGC-SF-290 | ● Configured to order
Built for the ISO 19095-3, Fig. 1 plastic-metal assembly specimen
Rated to 150 kN (33,720 lbf) for strong direct-joined assemblies
Lever-operated upper roller grip for fast specimen loading
Articulating lower holder loads the bonded interface without bending
Nickel-plated steel; male clevis with Ø 50 mm (1.97 in) pin hole
Standards: ISO 19095-3
Trusted by Global Companies


























Adhesion fixture for plastic-metal hybrid assemblies
The UGC-SF-290 is a tensile test fixture for the adhesion properties of plastic-metal assemblies, using the specimen shown in ISO 19095-3, Fig. 1. It serves engineers qualifying insert-molded and direct-joined parts: automotive lightweight structures, electronics housings and other plastic-metal hybrid components where the strength of the polymer-to-metal interface decides whether the part holds.
How it works
The molded specimen is clamped at the top in a grip with rollers that close under a lever, so loading a specimen is a quick, tool-free motion. The lower end sits in a specimen holder carried on an articulating joint. As the machine pulls, the joint lets the holder follow the load line, so the bonded interface is loaded in tension without bending. That matters on hybrid specimens, where any bending moment would start to peel the interface and lower the measured adhesion.
Typical work includes comparing surface treatments on the metal insert, setting molding parameters for direct-joined parts and checking production lots of insert-molded components. Each of these depends on seeing whether a process change moved the joint strength, which is why consistent alignment from test to test is worth having.
Capacity and construction
Max. load: 150 kN (33,720 lbf), enough for strong direct-joined assemblies.
Specimen: per ISO 19095-3, Fig. 1. Other geometries can be discussed on request.
Coupling: male clevis with a Ø 50 mm (1.97 in) pin hole.
Material: nickel-plated steel for corrosion resistance.
Temperature: ambient; other ranges on request.
Machine fit
The 150 kN rating and Ø 50 mm clevis point to Galdabini floor-standing universal testing machines. Assemblies that fail well below the rating can also be tested on a 100 kN benchtop UTM, with a coupling adapter where the crosshead connection differs.
Where it fits in your test plan
Although it sits in our shear fixtures range, this fixture loads the joint in tension. For lap or block-shear tests on bonded joints, see the UGC-SF-170 adhesive shear strength fixture, and browse our adhesive testing and plastics testing pages for related grips.
Tell us your specimen geometry and machine coupling, and we will quote the fixture.
Plastic-Metal Assembly Adhesion Fixture Specifications
TEST TYPE
Tensile adhesion of plastic-metal assemblies
MAX. LOAD
150 kN (33,720 lbf)
SPECIMEN
Per ISO 19095-3, Fig. 1
UPPER GRIP
Lever-operated rollers
LOWER HOLDER
Specimen holder on articulating joint
COUPLING
Male clevis, Ø 50 mm pin hole
MATERIAL
Steel, nickel-plated
TEMPERATURE RANGE
Ambient (other ranges on request)
DRAWINGS
Dimensional drawings and 3D models on request
PART REF.
UGC-SF-290
Models & Options
Standard fixture — Lever roller grip and articulating holder for the ISO 19095-3, Fig. 1 specimen (Specify at order)
Other specimen geometries — Holder adapted to your molded specimen (On request)
Coupling adapters — For machines without a Ø 50 mm clevis (On request)
Other temperature ranges — Beyond ambient (On request)
What's Included
Upper grip with lever-operated rollers
Lower specimen holder on an articulating joint
Male clevis connection with Ø 50 mm pin hole
Supported Test Standards
ISO 19095-3 — Adhesion interface performance of plastic-metal assemblies – test methods
Compatible Grips & Fixtures
Floor-Standing UTMs — Galdabini frames for the full 150 kN rating
100 kN Benchtop UTM — For lower-strength assemblies
UGC-SF-170 Adhesive Shear Strength Fixture — Block-shear testing of bonded joints
Adhesives Testing — Grips and fixtures for bonded joints
Adapters — Fit the Ø 50 mm clevis to other couplings
“Customer quote”
Related Equipment
UGC-SF-170 Adhesive Shear Strength Fixture ISO 13445
Block-shear fixture for adhesive bonds between rigid substrates, rated to 20 kN, with interchangeable inserts for ASTM D
UGC-SF-280 Spinal Implant Compression-Shear Fixture
Compression-shear fixture for intervertebral body fusion devices to ASTM F2077, with an inclined loading block and a gra
UGC-SF-300 Sapphire Glue Strength Shear Fixture
Special shear fixture for measuring the glue strength of bonded sapphire parts, with a rigid housing and inspection wind
UGC-SF-270 O-Ring Composite Shear Fixture
Special shear fixture for ring-shaped composite samples 70 to 170 mm in diameter, with stepped seats on two steel blocks
Plastic-Metal Assembly Adhesion Fixture FAQ
Which standard is this fixture for?
ISO 19095-3, using the specimen in Fig. 1, for the adhesion of plastic-metal assemblies.
Is this a shear or a tensile test?
The fixture loads the plastic-metal interface in tension. For block-shear tests on bonded joints, see the UGC-SF-170.
Why does the lower holder articulate?
The articulating joint lets the specimen align with the load line, so the interface is pulled without bending.
How fast is specimen loading?
The upper grip closes its rollers with a lever, so there are no screws to tighten between specimens.
What is the capacity and coupling?
150 kN (33,720 lbf), with a male clevis that has a Ø 50 mm pin hole. Other couplings via adapters.
Can it hold specimens other than ISO 19095-3, Fig. 1?
Tell us your specimen geometry; other versions are available on request.




