top of page

Home  ›  Products  ›  Shear Fixtures  ›  Tooth Sample Shear Fixture

UGC-SF-330 tooth sample shear fixture with interchangeable rectangular inserts by Universal Grip
UGC-SF-330 tooth sample shear fixture with interchangeable rectangular inserts by Universal Grip
UGC-SF-330 Tooth Sample Shear Fixture by Universal Grip, view 2
UGC-SF-330 Tooth Sample Shear Fixture by Universal Grip, view 3
UGC-SF-330 Tooth Sample Shear Fixture by Universal Grip, view 4

Tooth Sample Shear Fixture – Interchangeable Inserts

Compact shear fixture for tooth samples with interchangeable 10 x 10 mm and 5 x 5 mm inserts, knurled side screws and a version for round samples.

Brand: Universal Grip  |  Model: UGC-SF-330  |  ● Configured to order

  • Compact steel holder sized for small tooth samples

  • Interchangeable rectangular inserts, 10 x 10 mm and 5 x 5 mm

  • Knurled screws on both sides clamp the sample by hand

  • Separate version available for round tooth samples

  • Nickel-plated steel; clevis pin coupling, other sizes via adapters

Downloads and standards

Trusted by Global Companies

Shear fixture for human and bovine tooth samples

The UGC-SF-330 is a compact shear test fixture for tooth samples. Dental research groups and adhesive developers use it for enamel and dentin bonding studies on human and bovine teeth, where samples come in different sizes and a single fixed holder would not fit them all.

 

How it works

The sample sits in a rectangular insert inside a small steel holder. Knurled screws on both sides of the holder are turned by hand to clamp the sample in place, and the shear load is then applied by the testing machine. Because the insert, not the holder, sets the pocket size, changing to a different sample size is a matter of swapping inserts rather than changing fixtures. That makes it practical to run sample sets of mixed sizes in one session: set up the machine once, then change the insert between groups.

 

Inserts and versions

  • 10 x 10 mm insert (0.39 x 0.39 in) for larger rectangular samples.

  • 5 x 5 mm insert (0.20 x 0.20 in) for smaller rectangular samples.

  • Round sample version for round tooth samples.

The holder is nickel-plated steel for corrosion resistance, connects through a clevis pin coupling (other sizes via adapters) and is used at ambient temperature. Maximum load is given on request, so tell us the expected load when you enquire.

 

Which dental fixture fits your protocol?

The UGC-SF-330 suits work on loose rectangular or round tooth pieces that fit a 10 x 10 mm or 5 x 5 mm pocket. If your specimens are embedded in a mount with a bonded cylinder, look at the UGC-SF-310 notched-edge fixture or the UGC-SF-080 for ISO/TS 11405; for crown and veneering materials, the UGC-SF-060 for ISO 10477.

 

Machine fit

Tooth samples fail at modest forces, so a Mark-10 F-series motorized tester (100–1,500 lbF) or a 2.5 kN benchtop UTM is a sensible platform. We confirm the coupling once we know your machine, and supply an adapter if the clevis differs.

Send the sample shape and size, expected maximum load and machine coupling, and we will quote the fixture and inserts.

Product video

At a glance

  • Test type: Shear of tooth samples

  • Max. load: On request

  • Inserts: Rectangular 10 x 10 mm and 5 x 5 mm

  • Round samples: Separate version available

  • Clamping: Knurled side screws

  • Coupling: Clevis pin coupling; other sizes via adapters

Tooth Sample Shear Fixture Specifications

TEST TYPE

Shear of tooth samples

 

MAX. LOAD

On request

 

INSERTS

Rectangular 10 x 10 mm and 5 x 5 mm

 

ROUND SAMPLES

Separate version available

 

CLAMPING

Knurled side screws

 

COUPLING

Clevis pin coupling; other sizes via adapters

 

MATERIAL

Steel, nickel-plated

 

TEMPERATURE RANGE

Ambient

 

DRAWINGS

Dimensional drawings and 3D models on request

 

PART REF.

UGC-SF-330

 

Models & Options

  • Insert 10 x 10 mm — Rectangular samples (Specify at order)

  • Insert 5 x 5 mm — Rectangular samples (Specify at order)

  • Round sample version — Holder for round tooth samples (Specify at order)

  • Coupling adapters — For other machine connections (On request)

What's Included

  • Steel shear holder with knurled clamping screws on both sides

  • Rectangular insert(s) as specified at order (10 x 10 mm and/or 5 x 5 mm)

  • Clevis pin coupling; adapters for other sizes on request

Supported Test Standards

Standards list

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SF-060 Dental Crown Shear Bond Fixture ISO 10477

UGC-SF-060 Dental Crown Shear Bond Fixture ISO 10477

1 kN shear bond fixture for polymer-based crown and veneering materials to ISO 10477, with a graduated slide and screw-a

UGC-SF-080 Dental Adhesion Shear Fixture ISO TS 11405

UGC-SF-080 Dental Adhesion Shear Fixture ISO TS 11405

Shear fixture for measuring adhesion to tooth structure to ISO/TS 11405, with a cage holder for embedded teeth and a Ø 1

UGC-SF-310 Dental Restorative Bond Shear Fixture ISO 29022

UGC-SF-310 Dental Restorative Bond Shear Fixture ISO 29022

Notched-edge shear fixture for the bond strength of dental restoratives to tooth structure, with a V-block specimen hold

UGC-SF-320 Coating Shear Fixture

UGC-SF-320 Coating Shear Fixture

Shear grips for calcium phosphate and porous metallic implant coatings to ASTM F1044 and F1160, with offset blocks and p

Tooth Sample Shear Fixture FAQ

What sample sizes does the fixture accept?

Rectangular samples in 10 x 10 mm or 5 x 5 mm inserts. A separate version holds round tooth samples.

 

How is the sample clamped?

Knurled screws on both sides of the holder clamp the insert and sample by hand.

 

Can I switch between sample sizes?

Yes. The inserts are interchangeable, so you swap the insert rather than the whole fixture.

 

What kind of teeth is it used with?

Human and bovine teeth, for dental adhesive, enamel and dentin bonding research.

 

What is the maximum load?

On request. Tell us your expected maximum load when you enquire.

 

How does it differ from the UGC-SF-310?

The UGC-SF-330 clamps loose tooth pieces in inserts; the UGC-SF-310 holds embedded specimens in a V-block and shears a bonded cylinder.

 

Need help configuring a shear fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page