top of page

Home  ›  Products  ›  Shoulder and Button Head Grips  ›  Bottle Flip-Cap Test Fixture

UGC-SH-020 bottle flip-cap test fixture with hinged hook and bottle holder by Universal Grip
UGC-SH-020 bottle flip-cap test fixture with hinged hook and bottle holder by Universal Grip
UGC-SH-020 Bottle Flip-Cap Test Fixture by Universal Grip, view 2
Product photo 3
Product photo 4

Bottle Flip-Cap Test Fixture – Opening Force

A hinged hook lifts the lid of a flip-top cap through its natural arc while the bottle stays upright, recording opening force and hinge behavior.

Brand: Universal Grip  |  Model: UGC-SH-020  |  ● Configured to order

  • Hinged hook engages under the flip-cap lip, the way a thumb opens it

  • Hook follows the natural opening arc of the lid instead of pulling straight up

  • Flat upper plate references the top of the cap for repeatable positioning

  • Knurled coupling nut for quick mounting and alignment on the machine

  • Lower holder keeps the bottle upright and is adapted to your container

  • One force curve shows both the opening force and how the hinge behaves

Downloads and standards

Trusted by Global Companies

Measure how hard a flip-top cap is to open

A flip-top cap has to stay shut in transit and still open easily for the person using it. The UGC-SH-020 fixture puts a number on that balance. It is a special fixture for measuring the opening force of flip-top caps on bottles and tubes, used by packaging engineers, closure suppliers and QC labs in beverage, cosmetics, pharmaceutical and food packaging.

 

How it works

The bottle stands upright in a lower holder. Above it, a hinged hook is mounted on a flat upper plate. The plate rests against the top of the cap so the hook always starts from the same reference, and the hook tip engages under the lip of the flip-cap. As the crosshead rises, the hinged hook lifts the lid through its natural opening arc rather than tearing it straight upward. That matters: a rigid hook would load the hinge sideways and give a force that no consumer ever feels.

The resulting curve shows the peak force needed to pop the lid off its snap, followed by the behavior of the hinge as the lid swings open. Comparing curves between cap lots, molding cavities or resin grades quickly shows whether a closure is drifting toward too tight or too loose.

 

Adapted to your bottle and cap

Bottle and cap formats vary widely, so the lower holder and, where needed, the hook geometry are adapted to the customer's container. The fixture is built from aluminum and steel, and a knurled coupling nut makes mounting and alignment quick. Maximum load and machine coupling are confirmed when we quote, based on your caps and your test frame. Testing is at ambient temperature.

 

Typical applications

  • Beverage bottle closures and sports caps

  • Cosmetic and personal care bottles and tubes

  • Pharmaceutical containers

  • Food and condiment bottles

 

Machine fit

Flip-cap tests are normally run on a bench-top frame such as a Mark-10 F-series motorized tensile tester or a small Galdabini bench-top universal testing machine. If your machine uses a coupling we do not fit as standard, one of our adapters closes the gap. For other closure and package tests, see our food and packaging fixtures and peel fixtures for lidding films.

To get started, tell us the bottle and cap type, the cap dimensions, the opening force you expect and your machine coupling. Sending a few sample bottles lets us fit the holder and hook to the real part. Request a quote.

Product video

At a glance

  • Test type: Flip-cap opening force

  • Specimen: Bottles and tubes with flip-top caps

  • Engagement: Hinged hook under cap lip

  • Material: Aluminum and steel

  • Max. load: On request

  • Coupling: On request

Bottle Flip-Cap Test Fixture Specifications

TEST TYPE

Flip-cap opening force

 

SPECIMEN

Bottles and tubes with flip-top caps

 

ENGAGEMENT

Hinged hook under cap lip

 

MATERIAL

Aluminum and steel

 

MAX. LOAD

On request

 

COUPLING

On request

 

SPECIMEN SIZE

Adapted to customer bottle

 

TEMPERATURE RANGE

Ambient

 

PART REF.

UGC-SH-020

 

Models & Options

  • Flip-cap fixture — Hinged hook on flat upper plate with knurled coupling nut, plus lower bottle holder (Specify at order)

  • Lower holder for your bottle — Holder made to fit the customer's bottle or tube format (On request)

  • Hook geometry for your cap — Hook tip adapted to the lip of a specific cap design (On request)

  • Machine coupling — Coupling to suit your testing machine (On request)

What's Included

  • Upper plate with hinged hook and knurled coupling nut

  • Lower holder adapted to your bottle or tube

  • Final scope of supply, coupling and load rating confirmed with the quote

Supported Test Standards

Standards list

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SH-010 Hook Grips

UGC-SH-010 Hook Grips

Hang springs, loops and wire forms straight on the hook: eleven rod sizes from Ø 1 to 16 mm cover tensile loads from 0.0

UGC-SH-030 Carpet Tuft Withdrawal Fixture ISO 4919

UGC-SH-030 Carpet Tuft Withdrawal Fixture ISO 4919

Bottom sample holder, loop hook and forceps for pulling single tufts from loop pile and cut pile carpets 2 to 9 mm thick

UGC-SH-040 XY Table with Hook Grip for Circuit Boards

UGC-SH-040 XY Table with Hook Grip for Circuit Boards

Compact XY table and twin 0.8 mm wire-hook grip for repeatable pull tests on laser-welded joints across a circuit board.

UGC-SH-050 Leather Double-Edge Tear Fixture ISO 3377-2

UGC-SH-050 Leather Double-Edge Tear Fixture ISO 3377-2

Matched pair of stainless steel hooks for double-edge tear strength of leather to ISO 3377-2, in 80 mm or 98 mm hook len

Bottle Flip-Cap Test Fixture FAQ

Why use a hinged hook instead of a fixed one?

The hinged hook follows the lid through its natural opening arc, so the cap opens the way a user opens it. A fixed hook pulls straight up and loads the hinge sideways, which distorts the result.

 

What does the force curve show?

The peak gives the force to release the lid from its snap, and the rest of the curve shows how the hinge behaves as the lid swings open.

 

Will it fit my bottle?

The lower holder is adapted to the customer's bottle, and the hook can be adapted to the cap. Send us the bottle and cap dimensions, or better, a few sample bottles.

 

What is the maximum load and coupling?

Both are confirmed at quote to suit your caps and your machine. If needed, we supply an adapter for your coupling.

 

Can I run it on a Mark-10 force tester?

Yes, flip-cap tests are typically run on bench-top frames such as Mark-10 F-series tensile testers; we confirm the coupling when we quote.

 

Need help configuring a shoulder and button head grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page