top of page

Home  ›  Products  ›  Shoulder and Button Head Grips  ›  Hook Grips

UGC-SH-010 hook grips with clevis coupling for tension springs and looped specimens by Universal Grip
UGC-SH-010 hook grips with clevis coupling for tension springs and looped specimens by Universal Grip
UGC-SH-010 Hook Grips by Universal Grip, view 2
UGC-SH-010 Hook Grips by Universal Grip, view 3
UGC-SH-010 Hook Grips by Universal Grip, view 4

Hook Grips – 0.04 to 12 kN, Ø 1 to 16 mm Hook Rods

Hang springs, loops and wire forms straight on the hook: eleven rod sizes from Ø 1 to 16 mm cover tensile loads from 0.04 to 12 kN.

Brand: Universal Grip  |  Model: UGC-SH-010  |  ● Configured to order

  • No clamping: the specimen's own loop, eye or spring end hangs directly on the hook

  • Eleven hook rod diameters from 1 to 16 mm, each matched to its own load rating

  • Capacities from 0.04 kN (9 lbf) up to 12 kN (about 2,700 lbf)

  • Very low mass, from under 1 g to 400 g, so little dead weight sits on small load cells

  • Female clevis coupling for a 15.9 mm (5/8 in) or 20 mm pin; other couplings on request

  • Carton hook rated 500 N for bottle carriers, carrying cartons and bag handles

Downloads and standards

Trusted by Global Companies

Hook grips for springs, loops and specimens with built-in eyes

Many parts already carry their own attachment point: a tension spring has end loops, a strap has a sewn loop, a carrying handle has an opening. For these specimens a clamping grip only adds setup time and a risk of crushing the part. The UGC-SH-010 hook grips let the specimen hang on a hook, so the pull runs straight through its own loop or eye. Spring makers, packaging labs and QC teams use them for wire forms, straps, handles and netting.

 

Sizes and capacities

Each hook is formed from round rod, and the rod diameter sets the load rating. Eleven sizes are available:

  • Ø 1, 2 and 2.5 mm rod: 0.04, 0.15 and 0.25 kN (about 9, 34 and 56 lbf)

  • Ø 3 and 4 mm: 0.35 and 0.6 kN (79 and 135 lbf)

  • Ø 5 and 6 mm: 1 and 1.4 kN (225 and 315 lbf)

  • Ø 8 and 10 mm: 2.5 and 4 kN (562 and 899 lbf)

  • Ø 12 and 16 mm: 6 and 12 kN (1,349 and 2,698 lbf)

A thin rod keeps the hook light (the smallest weigh under 1 g) and passes through small spring eyes, while the heavier sizes, up to 400 g, carry loads into the multi-kilonewton range. Pick the smallest rod that covers your peak force with some margin, then check that it slides through the specimen's loop without binding.

 

Couplings and ordering

Every hook has a female clevis coupling for a 15.9 mm (5/8 in) or 20 mm pin, with a steel or aluminum adapter. Other couplings are available on request, and our adapters cover most other machine connections. Hook grips are supplied singly, so a tension spring test normally needs two: one on the load cell and one on the base.

 

Special hooks

Beyond the round-rod hooks, a carton hook rated 500 N (60 x 40 x 8 mm, 10 mm radius) is made for bottle carriers, carrying cartons and bag handles, where a thin rod would cut into board or film. Special hook shapes for fabrics and netting yarn are made on request.

 

Typical applications and machines

Common tests include extension and force of tension springs, strength of sewn loops and straps, handle pull on cartons and bags, and knot strength on netting yarn. The small and mid-size hooks suit Mark-10 F-series motorized tensile testers (100 to 1,500 lbF), while the 6 kN and 12 kN hooks are better matched to a Galdabini universal testing machine. The standard operating range is 0 to +70 °C, with other ranges on request.

Tell us the specimen, the size of its loop or eye, the expected peak force and your machine coupling, and we will recommend the right pair of hooks. Request a quote.

Product video

At a glance

  • Max. load: 0.04 – 12 kN (by hook size)

  • Test type: Tensile

  • Hook rod diameter: 1 – 16 mm

  • Coupling: Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm pin; others on request

  • Material: Steel or aluminum adapter

  • Temperature range: 0 to +70 °C (other ranges on request)

Hook Grips Specifications

MAX. LOAD

0.04 – 12 kN (by hook size)

 

TEST TYPE

Tensile

 

HOOK ROD DIAMETER

1 – 16 mm

 

COUPLING

Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm pin; others on request

 

MATERIAL

Steel or aluminum adapter

 

TEMPERATURE RANGE

0 to +70 °C (other ranges on request)

 

WEIGHT

< 1 g to 400 g (by hook size)

 

SCOPE OF SUPPLY

1 piece

 

PART REF.

UGC-SH-010

 

Models & Options

  • Hook Ø 1 / 2 / 2.5 mm — 0.04 / 0.15 / 0.25 kN, for light springs and fine wire forms (Specify at order)

  • Hook Ø 3 / 4 mm — 0.35 / 0.6 kN (Specify at order)

  • Hook Ø 5 / 6 mm — 1 / 1.4 kN (Specify at order)

  • Hook Ø 8 / 10 mm — 2.5 / 4 kN (Specify at order)

  • Hook Ø 12 / 16 mm — 6 / 12 kN, for heavy springs and straps (Specify at order)

  • Carton hook — 500 N, 60 x 40 x 8 mm, 10 mm radius, for carton and bag handles (Specify at order)

  • Special hook shapes — For fabrics, netting and other looped specimens (On request)

What's Included

  • 1 hook grip with clevis coupling (hooks are supplied singly)

  • Order two hooks when both ends of the specimen have loops or eyes

  • Certified dimensional drawings and 3D models on request

Supported Test Standards

Standards list

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SH-020 Bottle Flip-Cap Test Fixture

UGC-SH-020 Bottle Flip-Cap Test Fixture

A hinged hook lifts the lid of a flip-top cap through its natural arc while the bottle stays upright, recording opening

UGC-SH-030 Carpet Tuft Withdrawal Fixture ISO 4919

UGC-SH-030 Carpet Tuft Withdrawal Fixture ISO 4919

Bottom sample holder, loop hook and forceps for pulling single tufts from loop pile and cut pile carpets 2 to 9 mm thick

UGC-SH-040 XY Table with Hook Grip for Circuit Boards

UGC-SH-040 XY Table with Hook Grip for Circuit Boards

Compact XY table and twin 0.8 mm wire-hook grip for repeatable pull tests on laser-welded joints across a circuit board.

UGC-SH-050 Leather Double-Edge Tear Fixture ISO 3377-2

UGC-SH-050 Leather Double-Edge Tear Fixture ISO 3377-2

Matched pair of stainless steel hooks for double-edge tear strength of leather to ISO 3377-2, in 80 mm or 98 mm hook len

Hook Grips FAQ

How do I choose the hook size?

Pick by peak force first, then check fit. A spring that peaks at 500 N (112 lbf) is within the Ø 4 mm hook's 0.6 kN rating, but the Ø 5 mm hook (1 kN) gives a safer margin if its rod still passes through the spring eye.

 

Are the hooks sold in pairs?

No, hook grips are supplied singly. Order two for a specimen with loops at both ends, or one hook plus a clamping grip if the other end is plain.

 

What couplings are available?

The standard coupling is a female clevis for a 15.9 mm (5/8 in) or 20 mm pin. Other couplings are available on request, or you can use one of our adapters.

 

Can I test carton and bag handles?

Yes. The carton hook (500 N, 60 x 40 x 8 mm, 10 mm radius) spreads the load so it does not cut into board or film like a thin rod would.

 

What temperature range do the hooks cover?

The standard range is 0 to +70 °C. Other ranges are available on request for tests in an environmental chamber.

 

Which testing machine do I need?

Light and mid-size hooks run well on Mark-10 F-series tensile testers; the 6 kN and 12 kN hooks call for a universal testing machine.

 

Need help configuring a shoulder and button head grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page