Home › Products › Shoulder and Button Head Grips › Carpet Tuft Withdrawal Fixture ISO 4919





Carpet Tuft Withdrawal Fixture ISO 4919 – 150 N
Bottom sample holder, loop hook and forceps for pulling single tufts from loop pile and cut pile carpets 2 to 9 mm thick, up to 150 N.
Brand: Universal Grip | Model: UGC-SH-030 | ● Configured to order
Built for tuft withdrawal tests to ISO 4919, with a version for ASTM D1335
Loop hook for loop pile and forceps for gripping single tufts in cut pile
Bottom holder clamps the carpet flat so only the tuft is loaded
Accepts carpets from 2 to 9 mm (0.08 to 0.35 in) thick
Rated to 150 N (33.7 lbf), a good match for bench-top force testers
Upper parts, forceps and loop hooks also sold separately
Standards: ISO 4919 · ASTM D1335
Trusted by Global Companies


























Tuft withdrawal testing for loop and cut pile carpets
How firmly a tuft is anchored in the backing decides whether a carpet sheds, snags or pulls apart in use. The UGC-SH-030 fixture measures that anchoring force by pulling single tufts out of the carpet, as described in ISO 4919. It is used by carpet mills, automotive interior suppliers and textile labs for incoming inspection and product development, and a version for ASTM D1335 tuft pull-out tests is also available.
How it works
The carpet specimen is clamped flat in a bottom sample holder, which keeps the backing from lifting as the tuft is pulled. A single tuft is then engaged from above:
Loop pile: a loop hook is passed under one loop and pulled upward.
Cut pile: forceps grip the two legs of one cut tuft.
The crosshead rises until the tuft withdraws from the backing, and the peak force is recorded. Because the holder clamps the carpet flat and only one tuft is loaded, results reflect the tuft bind rather than distortion of the surrounding pile. The fixture accepts carpets from 2 to 9 mm (0.08 to 0.35 in) thick at forces up to 150 N (33.7 lbf).
Versions
The ISO 4919 fixture is supplied with bottom holder, loop hook and forceps. A forceps version built from aluminum and stainless steel has an adjustable opening of 0 to 50 mm (0 to 2 in). For ASTM D1335 work there is a separate fixture, also with holder, loop hook and forceps. If you already have a holder, the upper part (forceps and chain) and the loop hook, with or without chain, can be ordered on their own.
Construction and machine fit
The standard fixture is nickel-plated steel with a female clevis coupling for a 15.9 mm (5/8 in) pin; other couplings are on request, and our adapters cover most machines. At 150 N, the fixture sits comfortably on a Mark-10 F-series 100 lb motorized tensile tester or a Galdabini 2.5 kN universal testing machine. The standard operating range is 0 to +70 °C, other ranges on request.
Typical applications
Tufted carpets, loop pile floor coverings, cut pile carpets and automotive carpets all use this test. For other textile tests, see our textile testing overview.
Tell us the standard (ISO 4919 or ASTM D1335), the pile type and your machine coupling, and we will configure the fixture. Request a quote.
Carpet Tuft Withdrawal Fixture ISO 4919 Specifications
MAX. LOAD
150 N
TEST TYPE
Tuft withdrawal (pull-out)
CARPET THICKNESS
2 – 9 mm
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin; others on request
MATERIAL
Steel, nickel-plated
TEMPERATURE RANGE
0 to +70 °C (other ranges on request)
SCOPE OF SUPPLY
Bottom sample holder, loop hook and forceps
STANDARDS
ISO 4919, ASTM D1335
PART REF.
UGC-SH-030
Models & Options
ISO 4919 fixture — Bottom sample holder, loop hook and forceps (Specify at order)
ISO 4919 forceps version — Aluminum and stainless steel, adjustable opening 0–50 mm (Specify at order)
ASTM D1335 fixture — Holder, loop hook and forceps (Specify at order)
Upper part only — Forceps and chain (Specify at order)
Loop hook only — With or without chain (Specify at order)
What's Included
Bottom sample holder
Loop hook for loop pile carpets
Forceps for cut pile carpets
Upper part and loop hook also available separately
Supported Test Standards
ISO 4919 — Carpets – determination of tuft withdrawal force
ASTM D1335 — Tuft bind of pile yarn floor coverings
Compatible Grips & Fixtures
100 lb tensile tester — Mark-10 F-series motorized tester sized for 150 N tuft pulls
2.5 kN universal testing machine — Galdabini bench-top frame
Adapters — For machines without a 15.9 mm clevis
Textile testing — Grips and fixtures for fabrics, yarns and floor coverings
Tensile testing — Tensile and pull-out test overview
“Customer quote”
Related Equipment
UGC-SH-020 Bottle Flip-Cap Test Fixture
A hinged hook lifts the lid of a flip-top cap through its natural arc while the bottle stays upright, recording opening
UGC-SH-040 XY Table with Hook Grip for Circuit Boards
Compact XY table and twin 0.8 mm wire-hook grip for repeatable pull tests on laser-welded joints across a circuit board.
UGC-SH-010 Hook Grips
Hang springs, loops and wire forms straight on the hook: eleven rod sizes from Ø 1 to 16 mm cover tensile loads from 0.0
UGC-SH-050 Leather Double-Edge Tear Fixture ISO 3377-2
Matched pair of stainless steel hooks for double-edge tear strength of leather to ISO 3377-2, in 80 mm or 98 mm hook len
Carpet Tuft Withdrawal Fixture ISO 4919 FAQ
Which tool do I use for loop pile and which for cut pile?
Use the loop hook for loop pile, passed under a single loop. Use the forceps for cut pile, gripping both legs of one tuft.
How thick a carpet can it hold?
The bottom holder accepts carpets from 2 to 9 mm (0.08 to 0.35 in) thick.
Is there a version for ASTM D1335?
Yes, a separate ASTM D1335 fixture is available with its own holder, loop hook and forceps.
What is the maximum force?
150 N (33.7 lbf), which suits a Mark-10 F-series 100 lb tensile tester or a 2.5 kN universal testing machine.
Can I buy just the forceps or loop hook?
Yes. The upper part with forceps and chain, and the loop hook with or without chain, are sold separately.
Does it test automotive carpet?
Yes, automotive carpets are among the typical applications, alongside tufted, loop pile and cut pile floor coverings.




