Home › Products › Shoulder and Button Head Grips › Leather Double-Edge Tear Fixture ISO 3377-2





Leather Double-Edge Tear Fixture ISO 3377-2 – 500 N
Matched pair of stainless steel hooks for double-edge tear strength of leather to ISO 3377-2, in 80 mm or 98 mm hook lengths, rated 500 N.
Brand: Universal Grip | Model: UGC-SH-050 | ● Configured to order
Hook pair for the double-edge tear method of ISO 3377-2
Stainless steel hooks give corrosion-free, low-friction contact with the slot
Two hook lengths: 80 mm (3.15 in) or 98 mm (3.86 in)
Rated to 500 N (112 lbf), sized for leather tear loads
Light 0.42 kg (0.93 lb) pair keeps dead weight off the load cell
Nickel-plated steel adapters with female clevis coupling for a 5/8 in pin
Standards: ISO 3377-2
Trusted by Global Companies


























Double-edge tear testing for leather
Tear strength tells a tannery or a shoe maker whether a hide will hold stitches, eyelets and cut edges in service. The UGC-SH-050 is a hook fixture for determining the tear strength of leather by the double-edge tear method of ISO 3377-2 (also published as DIN EN ISO 3377-2). It is used in tanneries, by footwear and upholstery manufacturers, by automotive interior suppliers and in incoming goods inspection.
How it works
The leather specimen has a slot cut in it. The two stainless steel hooks are inserted into the slot, one from the upper fixture and one from the lower, and the testing machine pulls them apart. As the hooks separate, the leather tears at both edges of the slot until it fails, and the machine records the tear load. Stainless steel hooks keep friction at the slot low and do not corrode from contact with tanning residues or moisture in the leather.
Hook lengths
Two versions are offered, each supplied as a matched pair of upper and lower fixtures rated to 500 N (112 lbf):
Hook length 80 mm (3.15 in)
Hook length 98 mm (3.86 in)
Specify the hook length at order, based on your specimen layout and the free space between your machine's couplings.
Construction
The hooks are stainless steel; the adapters are nickel-plated steel with a female clevis coupling for a 15.9 mm (5/8 in) pin, and other couplings are available on request or through our adapters. The complete pair weighs only 0.42 kg (0.93 lb), so very little dead weight hangs on the load cell, which helps resolution on low-capacity sensors. The standard temperature range is 0 to 70 °C; other ranges are available on request.
Machine fit
At 500 N, the fixture suits a Mark-10 F-series 300 lb motorized tensile tester or a Galdabini 2.5 kN universal testing machine. For other tear tests on rubber, film and fabric, see our tear testing overview.
Typical applications
Tannery production control, footwear and upholstery leather, automotive interior leather, and incoming goods inspection of hides and splits.
Tell us the hook length (80 mm or 98 mm), your machine coupling and any temperature range outside 0 to 70 °C, and we will quote the pair. Request a quote.
Leather Double-Edge Tear Fixture ISO 3377-2 Specifications
MAX. LOAD
500 N
TEST TYPE
Double-edge tear (tear strength of leather)
HOOK LENGTH
80 mm or 98 mm
HOOK MATERIAL
Stainless steel
ADAPTER MATERIAL
Steel, nickel-plated
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin; others on request
TEMPERATURE RANGE
0 to 70 °C; other ranges on request
WEIGHT
0.42 kg per pair
SCOPE OF DELIVERY
1 pair of fixtures
STANDARDS
ISO 3377-2, DIN EN ISO 3377-2
PART REF.
UGC-SH-050
Models & Options
Hook length 80 mm — Pair of stainless steel hooks, 500 N (Specify at order)
Hook length 98 mm — Pair of stainless steel hooks, 500 N (Specify at order)
Other coupling — Coupling other than 15.9 mm female clevis (On request)
Extended temperature range — Range outside 0 to 70 °C (On request)
What's Included
1 matched pair of fixtures (upper and lower)
Stainless steel hooks in the length ordered
Nickel-plated steel adapters with female clevis coupling
Supported Test Standards
ISO 3377-2 — Leather – tear load, double edge tear (also DIN EN ISO 3377-2)
Compatible Grips & Fixtures
300 lb tensile tester — Mark-10 F-series motorized tester sized for 500 N
2.5 kN universal testing machine — Galdabini bench-top frame
Tear testing — Tear test methods and fixtures
Adapters — For other machine couplings
Environmental chambers — For tests outside room temperature
“Customer quote”
Related Equipment
UGC-SH-040 XY Table with Hook Grip for Circuit Boards
Compact XY table and twin 0.8 mm wire-hook grip for repeatable pull tests on laser-welded joints across a circuit board.
UGC-SH-060 Tire Cord Adhesion T-Test Grips ISO 4647
Slotted upper and lower grips that hold the rubber blocks of a tire cord specimen and pull the cord out to measure stati
UGC-SH-030 Carpet Tuft Withdrawal Fixture ISO 4919
Bottom sample holder, loop hook and forceps for pulling single tufts from loop pile and cut pile carpets 2 to 9 mm thick
UGC-SH-070 Pipe Tensile Test Grips ISO 6259-3
Shoulder grips for dumbbell specimens machined from thermoplastic pipe walls, in two versions for 12 to 50 mm and 30 to
Leather Double-Edge Tear Fixture ISO 3377-2 FAQ
What test does this fixture perform?
The double-edge tear test of ISO 3377-2, where two hooks are pulled apart through a slot in the leather until it tears.
Which hook length should I order?
Both the 80 mm and 98 mm hooks are rated 500 N. Choose based on your specimen layout and the clearance between your machine's couplings; we can help if unsure.
Is it supplied as a pair?
Yes, one order is a matched pair of upper and lower fixtures, weighing 0.42 kg (0.93 lb) together.
Why stainless steel hooks?
They resist corrosion from contact with leather and keep friction at the slot low.
What machine do I need?
500 N (112 lbf) fits a Mark-10 F-series 300 lb tensile tester or a 2.5 kN universal testing machine.




