Home › Products › Shoulder and Button Head Grips › Tire Cord Adhesion T-Test Grips ISO 4647





Tire Cord Adhesion T-Test Grips ISO 4647
Slotted upper and lower grips that hold the rubber blocks of a tire cord specimen and pull the cord out to measure static adhesion.
Brand: Universal Grip | Model: UGC-SH-060 | ● Configured to order
Slotted grips hold the molded rubber blocks while the cord runs through the slot
Identical upper and lower grips give symmetric load introduction
Specimens drop in without clamping screws, so changeover is quick
Measures the force to pull the cord out of the vulcanized compound
Nickel-plated steel construction for long service in a rubber lab
Female clevis coupling for a 20 mm pin; other couplings via adapter
Standards: ISO 4647 · ASTM D4776
Trusted by Global Companies


























Static adhesion testing of tire cord in rubber
A tire is only as durable as the bond between its reinforcing cords and the surrounding rubber. Cord adhesion tests show whether a dip, a compound or a cure cycle gives that bond. The UGC-SH-060 is a set of special grips for measuring the static adhesion of tire cords to vulcanized rubber, for tests such as ISO 4647 and ASTM D4776. It is used by tire makers, cord suppliers and rubber compound developers.
How it works
The specimen is a single cord with a block of rubber molded onto each end, the shape that gives the H-test its name. Each block drops into a slotted grip: the cord passes through the slot while the block sits behind it. As the crosshead moves, the load pulls the cord out of one of the rubber blocks, and the peak force is taken as the adhesion value.
The upper and lower grips are identical, so load is introduced symmetrically and neither block is favored. There are no clamping screws to tighten, so an operator can run a long series of specimens from one cure with very little handling time between them.
Construction and coupling
Upper and lower special grips, slotted
Steel, nickel-plated, for corrosion resistance and long service life
Female clevis coupling for a 20 mm (0.79 in) pin; other couplings via adapters
Manual specimen insertion
The maximum load is confirmed at quote, based on your cord type and rubber block size. Tell us the expected peak force so we can confirm the rating.
Typical applications
Tire manufacturing, development of textile and steel tire cords, rubber compound development, and routine cord adhesion quality control. Testing a dipped cord against several compounds, or a single compound against several cure times, are typical uses.
Machine fit
Cord pull-out tests are normally run on a Galdabini bench-top universal testing machine; lighter textile cords may also suit a Mark-10 F-series motorized tensile tester once the expected force is known. For tensile and tear tests on the rubber itself, see our elastomer testing page.
Choosing the right setup
The grips need to match the rubber block dimensions of your specimen mold. Send us the cord type, the block dimensions, the expected maximum load and your machine coupling, and we will confirm the slot width and rating. Request a quote.
Tire Cord Adhesion T-Test Grips ISO 4647 Specifications
TEST TYPE
Static adhesion of cord to rubber (pull-out)
SPECIMEN
Tire cord with rubber block molded on each end
GRIPS
Upper and lower special grips, slotted
MAX. LOAD
On request
MATERIAL
Steel, nickel-plated
COUPLING
Female clevis, Ø 20 mm pin; others via adapter
OPERATION
Manual specimen insertion
STANDARDS
ISO 4647, ASTM D4776
PART REF.
UGC-SH-060
Models & Options
Tire cord adhesion grip set — Identical slotted upper and lower grips, female clevis Ø 20 mm (Specify at order)
Grips for your block size — Slot and seat matched to your rubber block dimensions (On request)
Coupling adapter — For machines without a 20 mm clevis (On request)
What's Included
Upper slotted grip
Lower slotted grip
Female clevis couplings for 20 mm pin
Supported Test Standards
ISO 4647 — Vulcanized rubber – static adhesion to textile cord (H-pull test)
ASTM D4776 — Adhesion of tire cords to rubber compounds by H-test procedure
Compatible Grips & Fixtures
Benchtop universal testing machines — Galdabini bench-top frames
Tensile testers — Mark-10 F-series motorized testers for lighter cords
Elastomer testing — Grips and fixtures for rubber testing
Adapters — For other machine couplings
“Customer quote”
Related Equipment
UGC-SH-050 Leather Double-Edge Tear Fixture ISO 3377-2
Matched pair of stainless steel hooks for double-edge tear strength of leather to ISO 3377-2, in 80 mm or 98 mm hook len
UGC-SH-070 Pipe Tensile Test Grips ISO 6259-3
Shoulder grips for dumbbell specimens machined from thermoplastic pipe walls, in two versions for 12 to 50 mm and 30 to
UGC-SH-040 XY Table with Hook Grip for Circuit Boards
Compact XY table and twin 0.8 mm wire-hook grip for repeatable pull tests on laser-welded joints across a circuit board.
UGC-SH-080 Net Holding Fixture 10 kN
Pin-bar fixture pair for tensile tests on nets and open mesh up to 10 kN: meshes hook over a row of pins and a clamping
Tire Cord Adhesion T-Test Grips ISO 4647 FAQ
What specimen do these grips take?
A tire cord with a rubber block molded onto each end. Each block sits behind the slot of one grip while the cord passes through.
Why are the upper and lower grips identical?
Symmetric grips introduce the load evenly into both rubber blocks, so the pull-out result is not biased by the fixture.
Do I need tools to load a specimen?
No. The blocks drop into the slotted grips without clamping screws.
What is the maximum load?
It is confirmed at quote based on your cord and block size. Send us the expected peak force.
Can the grips be matched to my specimen mold?
Yes. Send us the rubber block dimensions from your mold and we will confirm or adapt the slot and seat to suit.




