top of page

Home  ›  Products  ›  Shoulder and Button Head Grips  ›  Pipe Tensile Test Grips ISO 6259-3

UGC-SH-070 pipe tensile test grips ISO 6259-3 for thick thermoplastic pipe specimens by Universal Grip
UGC-SH-070 pipe tensile test grips ISO 6259-3 for thick thermoplastic pipe specimens by Universal Grip
UGC-SH-070 Pipe Tensile Test Grips ISO 6259-3 by Universal Grip, view 2
UGC-SH-070 Pipe Tensile Test Grips ISO 6259-3 by Universal Grip, view 3
UGC-SH-070 Pipe Tensile Test Grips ISO 6259-3 by Universal Grip, view 4

Pipe Tensile Test Grips ISO 6259-3 – 12 to 70 mm Specimens

Shoulder grips for dumbbell specimens machined from thermoplastic pipe walls, in two versions for 12 to 50 mm and 30 to 70 mm thickness.

Brand: Universal Grip  |  Model: UGC-SH-070  |  ● Configured to order

  • Built for pipe specimens to ISO 6259-3 and ISO 4437-1

  • Holds thick-walled specimens from 12 mm up to 70 mm (0.47 to 2.76 in)

  • Loads the specimen at its shoulders, so curved sections do not slip

  • Two versions with different couplings for smaller and larger frames

  • Nickel-plated steel resists corrosion from coolant and handling in the lab

Standards: ISO 6259-3  ·  ISO 4437-1

Trusted by Global Companies

Tensile grips for specimens cut from thermoplastic pipe

Tensile specimens machined from a pipe wall are thick and curved, which makes them hard to hold in flat wedge or vise jaws without slip or jaw breaks. The UGC-SH-070 grips solve this by holding the dumbbell specimen at its shoulders. They are designed for tensile tests on thermoplastic pipes to ISO 6259-3 and ISO 4437-1, and are used by plastic pipe producers, gas and water utilities' suppliers and third-party test labs.

See our complete ISO 6259-3 guide for specimen preparation, procedure and calculations. This page focuses on the grips themselves.

 

How it works

Dumbbell specimens are machined from the pipe wall. Their wider ends sit in the grips so that load bears on the shoulders rather than on clamped faces. Because the grip does not rely on friction, the curved, thick-walled section is pulled axially without slipping, and the gauge length is left free of clamping marks.

 

Versions

  • Specimen thickness 12–50 mm (0.47–1.97 in): for ISO 6259-3 Fig. 3 and ISO 4437-1 specimens; male clevis with Ø 25 mm pin hole.

  • Specimen thickness 30–70 mm (1.18–2.76 in): for ISO 6259-3; female clevis for a Ø 31.8 mm (1-1/4 in) pin.

The two couplings let the grips fit smaller and larger test frames. If your machine uses a different connection, our adapters bridge the gap. Both versions are nickel-plated steel and are operated manually.

 

Choosing the right version

Start from the pipe wall thickness and the specimen type your standard requires. Walls up to 50 mm fall in the smaller version, and the 30–70 mm version covers the heaviest polyethylene pipe. In the 30–50 mm overlap, choose by your machine's coupling. The maximum load is confirmed at quote based on your specimen cross-section.

 

Machine fit

Thick polyolefin pipe specimens generally call for a Galdabini universal testing machine, from bench-top frames for thinner walls to floor-standing machines for the largest sections. For elongation on long specimens, pair the grips with an extensometer. For ring specimens cut from pipe, see the split disc pipe tensile fixture.

 

Typical applications

Plastic pipe manufacturing, polyethylene gas and water pipes, pipe material qualification and third-party testing laboratories. More on our plastics testing page.

Tell us the pipe wall thickness, the specimen type, the expected maximum load and your machine coupling, and we will recommend the version. Request a quote.

Product video

At a glance

  • Test type: Tensile test of thermoplastic pipe specimens

  • Specimen thickness: 12-50 mm or 30-70 mm (by version)

  • Max. load: On request

  • Material: Steel, nickel-plated

  • Coupling: Male clevis, Ø 25 mm pin hole, or female clevis, Ø 31.8 mm (1-1/4 in) pin

  • Operation: Manual

Pipe Tensile Test Grips ISO 6259-3 Specifications

TEST TYPE

Tensile test of thermoplastic pipe specimens

 

SPECIMEN THICKNESS

12-50 mm or 30-70 mm (by version)

 

MAX. LOAD

On request

 

MATERIAL

Steel, nickel-plated

 

COUPLING

Male clevis, Ø 25 mm pin hole, or female clevis, Ø 31.8 mm (1-1/4 in) pin

 

OPERATION

Manual

 

VERSIONS

2 (by specimen thickness and coupling)

 

STANDARDS

ISO 6259-3, ISO 4437-1

 

PART REF.

UGC-SH-070

 

Models & Options

  • Specimen thickness 12-50 mm — ISO 6259-3 Fig. 3 and ISO 4437-1; male clevis, Ø 25 mm pin hole (Specify at order)

  • Specimen thickness 30-70 mm — ISO 6259-3; female clevis, Ø 31.8 mm (1-1/4 in) pin (Specify at order)

  • Coupling adapter — For machines with other couplings (On request)

What's Included

  • Pair of pipe specimen shoulder grips in the version ordered

  • Clevis coupling per version (male Ø 25 mm pin hole or female Ø 31.8 mm pin)

  • Drawings and 3D models on request

Supported Test Standards

  • ISO 6259-3 — Thermoplastics pipes – tensile properties of polyolefin pipes

  • ISO 4437-1 — Polyethylene piping systems for gaseous fuels – general

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SH-060 Tire Cord Adhesion T-Test Grips ISO 4647

UGC-SH-060 Tire Cord Adhesion T-Test Grips ISO 4647

Slotted upper and lower grips that hold the rubber blocks of a tire cord specimen and pull the cord out to measure stati

UGC-SH-080 Net Holding Fixture 10 kN

UGC-SH-080 Net Holding Fixture 10 kN

Pin-bar fixture pair for tensile tests on nets and open mesh up to 10 kN: meshes hook over a row of pins and a clamping

UGC-SH-050 Leather Double-Edge Tear Fixture ISO 3377-2

UGC-SH-050 Leather Double-Edge Tear Fixture ISO 3377-2

Matched pair of stainless steel hooks for double-edge tear strength of leather to ISO 3377-2, in 80 mm or 98 mm hook len

UGC-SH-090 Liquid-Applied Membrane Adhesion Fixture EN 14891

UGC-SH-090 Liquid-Applied Membrane Adhesion Fixture EN 14891

Guided fixture that opens a crack beneath liquid-applied waterproofing for tiles to EN 14891 A.8, with a tensile adhesio

Pipe Tensile Test Grips ISO 6259-3 FAQ

Which standard are these grips for?

They are designed for dumbbell specimens to ISO 6259-3 and ISO 4437-1. Our ISO 6259-3 guide covers specimen preparation, procedure and calculations.

 

Why use shoulder grips instead of wedge grips?

Pipe specimens are thick and curved. Holding them at the shoulders loads them axially without slip or jaw damage to the gauge section.

 

Which version fits my pipe?

The 12–50 mm version covers walls up to 50 mm (1.97 in); the 30–70 mm version covers up to 70 mm (2.76 in). In the overlap, choose by your machine's coupling.

 

What couplings are available?

Male clevis with Ø 25 mm pin hole on the smaller version, female clevis for a Ø 31.8 mm (1-1/4 in) pin on the larger. Any other connection is bridged with an adapter.

 

What is the load rating?

The maximum load is confirmed at quote based on your specimen cross-section and machine.

 

Need help configuring a shoulder and button head grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page