top of page

Home  ›  Products  ›  Shoulder and Button Head Grips  ›  Net Holding Fixture 10 kN

UGC-SH-080 net holding fixture 10 kN with pin bar and thumb-screw clamping strip by Universal Grip
UGC-SH-080 net holding fixture 10 kN with pin bar and thumb-screw clamping strip by Universal Grip
UGC-SH-080 Net Holding Fixture 10 kN by Universal Grip, view 2
UGC-SH-080 Net Holding Fixture 10 kN by Universal Grip, view 3
Product photo 4

Net Holding Fixture 10 kN – Pin Bar Clamps for Mesh

Pin-bar fixture pair for tensile tests on nets and open mesh up to 10 kN: meshes hook over a row of pins and a clamping strip holds them in place.

Brand: Universal Grip  |  Model: UGC-SH-080  |  ● Configured to order

  • Row of pins engages individual meshes across the full bar width

  • Clamping strip with knurled thumb screws keeps the net seated during the pull

  • Load is shared across many meshes instead of being crushed in flat jaws

  • Rated to 10 kN (2,248 lbf) in nickel-coated steel

  • Tool-free specimen mounting and removal with thumb screws

  • Supplied as an upper and lower fixture pair

Downloads and standards

Trusted by Global Companies

Tensile testing of nets and open mesh

Nets are awkward specimens. Flat jaws crush the knots or let the mesh slide, and the result says more about the grip than about the net. The UGC-SH-080 is a pair of bar fixtures made to hold nets and open mesh in tension up to 10 kN (2,248 lbf). It suits makers and test labs working with fishing and safety nets, sports and cargo nets, knotted and knotless mesh, and geotextile grids.

 

How it works

Each bar carries a row of pins. The meshes of the net are hooked over the pins across the width of the bar, then a clamping strip is placed over them and tightened with knurled thumb screws. The strip keeps the net seated on the pins, while the pins themselves carry the load. Because the force is shared over several meshes, the net is pulled the way it is loaded in use, without the crushing or slipping that flat clamping faces can cause.

The thumb screws mean no tools are needed to mount or remove a specimen, which shortens the time between tests when you are working through a production lot.

 

Construction

  • Pin bar with clamping strip and knurled thumb screws

  • Steel, nickel-coated

  • Maximum load 10 kN

  • Clevis pin coupling; other sizes via adapters

  • Upper and lower fixture supplied as a pair

The clamping width is set at quote to suit your net. Tell us the mesh size and the width of the specimen, and we will confirm the pin layout and bar length.

 

Typical applications

Breaking strength of fishing and safety nets, sports and cargo nets, comparisons between knotted and knotless mesh, and tensile tests on geotextile grids. For single knots or yarns pulled on their own, our hook grips are a simpler choice; for ropes and cords, see our rope grips.

 

Machine fit

A 10 kN fixture pairs naturally with a Galdabini 10 kN bench-top universal testing machine. Lighter nets whose breaking force stays below about 6.7 kN can also be run on a Mark-10 F-series 1,500 lb motorized tensile tester. Choose the machine based on the strongest net you expect to test, not the average one.

 

Choosing the right setup

The key inputs are mesh size, net width and expected peak force. Larger meshes need wider pin spacing; stronger nets need the full 10 kN rating and a frame to match. Send us those details with your machine coupling, and we will configure the pair. Request a quote.

Product video

At a glance

  • Max. load: 10 kN

  • Test type: Tensile test of nets and mesh

  • Specimen holding: Pin bar with clamping strip and thumb screws

  • Clamping width: On request

  • Material: Steel, nickel-coated

  • Coupling: Clevis pin coupling - other sizes via adapters

Net Holding Fixture 10 kN Specifications

MAX. LOAD

10 kN

 

TEST TYPE

Tensile test of nets and mesh

 

SPECIMEN HOLDING

Pin bar with clamping strip and thumb screws

 

CLAMPING WIDTH

On request

 

MATERIAL

Steel, nickel-coated

 

COUPLING

Clevis pin coupling - other sizes via adapters

 

OPERATION

Manual

 

SCOPE OF SUPPLY

Upper and lower fixture pair

 

PART REF.

UGC-SH-080

 

Models & Options

  • Net holding fixture pair 10 kN — Upper and lower pin bars with clamping strips and thumb screws (Specify at order)

  • Clamping width and pin layout — Bar width and pin spacing set to your mesh size and net width (On request)

  • Coupling adapter — For other machine couplings (On request)

What's Included

  • Upper pin-bar fixture with clamping strip and thumb screws

  • Lower pin-bar fixture with clamping strip and thumb screws

  • Clevis pin couplings

Supported Test Standards

Standards list

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SH-070 Pipe Tensile Test Grips ISO 6259-3

UGC-SH-070 Pipe Tensile Test Grips ISO 6259-3

Shoulder grips for dumbbell specimens machined from thermoplastic pipe walls, in two versions for 12 to 50 mm and 30 to

UGC-SH-090 Liquid-Applied Membrane Adhesion Fixture EN 14891

UGC-SH-090 Liquid-Applied Membrane Adhesion Fixture EN 14891

Guided fixture that opens a crack beneath liquid-applied waterproofing for tiles to EN 14891 A.8, with a tensile adhesio

UGC-SH-060 Tire Cord Adhesion T-Test Grips ISO 4647

UGC-SH-060 Tire Cord Adhesion T-Test Grips ISO 4647

Slotted upper and lower grips that hold the rubber blocks of a tire cord specimen and pull the cord out to measure stati

UGC-SH-100 Adjustable Double Hook Grip

UGC-SH-100 Adjustable Double Hook Grip

Compact lower grip with two screw-adjusted hook arms for pulling loops, rings and eyelets, connected by an M12 male thre

Net Holding Fixture 10 kN FAQ

How is the net held?

The meshes hook over a row of pins on each bar, and a clamping strip tightened with knurled thumb screws keeps them seated. The pins carry the load.

 

Why not just use flat jaws?

Flat jaws tend to crush knots or let the mesh slip. Sharing the load over several meshes on pins gives results that reflect the net, not the grip.

 

What is the maximum load?

10 kN (2,248 lbf).

 

How wide a net can it hold?

The clamping width is set at quote. Tell us your mesh size and net width.

 

Which testing machine should I use?

A 10 kN universal testing machine covers the full rating; lighter nets can run on a Mark-10 1,500 lb tensile tester.

 

Need help configuring a shoulder and button head grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page