top of page
Search
Adhesive Testing


ASTM D1876 Complete Guide: T-Peel Test Specimens, Speed, Grips and Peel Strength Calculation
How to run ASTM D1876 T-peel tests correctly: panel and specimen construction, adherend effects, the 254 mm/min speed, T-peel grips, Mark-10 vs. Galdabini machines, averaging 127 mm after the initial peak, ISO 11339 and FAQ.
Chris Thomas
Nov 319 min read


ASTM D903 Complete Guide: 180° Peel Strength Test, Specimens, Speed, Fixtures and Calculations
How to run ASTM D903 180° peel tests correctly: specimen and bonding, the 305 mm/min crosshead rule, grips and alignment, Mark-10 vs. Galdabini machines, averaging the peel trace with a worked example, ISO 8510-2 and FAQ.
Chris Thomas
Nov 219 min read


ASTM D1002 Complete Guide: Lap Shear Test Specimens, Loading Rate, Grips and Shear Strength
How to run ASTM D1002 lap shear tests correctly: specimen and panel dimensions, surface preparation, the 80–100 kgf/cm² per minute loading rate, sizing the machine for structural adhesives, wedge grips and spacers, failure modes, ISO 4587 and FAQ.
Chris Thomas
Nov 120 min read


Rubber Adhesion Testing: ASTM D413 vs D429 Explained
How to test rubber bonded to fabric, cord and metal: ASTM D413 strip and ring peel tests for flexible substrates, D429 Methods A, B, C and E for rigid substrates, failure mode codes, fixtures and common mistakes.
Chris Thomas
Oct 274 min read


Lap Shear vs. Block Shear: ASTM D1002, D905 and D4501 Adhesive Shear Testing Explained
Lap shear or block shear? How to run ASTM D1002 lap shear, D905 wood block shear and D4501 block shear: specimens, speeds, shear strength calculations, grip spacers, fixtures, failure modes and common mistakes, with videos.
Chris Thomas
Oct 196 min read


Peel Test Fixtures Guide: 90°, 180°, T-Peel, Floating Roller and Climbing Drum Peel Testing with a Mark-10
A detailed guide to every Universal Grip peel fixture: 90°, 180°, T-peel, floating roller, climbing drum, tape-roll and credit-card peel, plus why a Mark-10 is an economical way to peel test.
Chris Thomas
Oct 813 min read


ASTM D1781 Climbing Drum Peel Test Fixture
This article provides a comprehensive technical overview of ASTM D1781, including the principles of the climbing drum peel test, required equipment, specimen preparation, grips and fixtures, data analysis, and best practices for achieving reliable and repeatable peel adhesion results.
Mark Edwards
Jan 238 min read
bottom of page
