top of page
Search
Shear Testing


ASTM D2344 Complete Guide: Short-Beam Shear Specimens, 4:1 Span, Fixtures and Failure Modes
How to run ASTM D2344 short-beam shear tests correctly: specimen sizes and the 4:1 span, fixture cylinders, 1.0 mm/min, sizing a Mark-10 or Galdabini machine, valid failure modes, a worked ILSS example, hot/wet testing, ISO 14130 and FAQ.
Chris Thomas
Nov 519 min read


ASTM D1002 Complete Guide: Lap Shear Test Specimens, Loading Rate, Grips and Shear Strength
How to run ASTM D1002 lap shear tests correctly: specimen and panel dimensions, surface preparation, the 80–100 kgf/cm² per minute loading rate, sizing the machine for structural adhesives, wedge grips and spacers, failure modes, ISO 4587 and FAQ.
Chris Thomas
Nov 120 min read


Composite Shear Testing: ASTM D2344 vs D5379 vs D7078 (and D3518) Explained
How to choose a composite shear test: D2344 short-beam shear, D5379 V-notched beam (Iosipescu), D7078 V-notched rail shear and D3518 ±45° tension, with specimens, speeds, formulas, fixtures and common mistakes.
Chris Thomas
Oct 224 min read


Sandwich Panel Testing: ASTM C393, C273, D7249, C297, C364 and C365 Explained
Which sandwich panel test measures what: core shear by C273 plate shear and C393 beam flexure, facing strength by D7249 long beam, flatwise tension C297, flatwise compression C365 and edgewise compression C364, with formulas, setups and fixtures.
Chris Thomas
Oct 204 min read


Lap Shear vs. Block Shear: ASTM D1002, D905 and D4501 Adhesive Shear Testing Explained
Lap shear or block shear? How to run ASTM D1002 lap shear, D905 wood block shear and D4501 block shear: specimens, speeds, shear strength calculations, grip spacers, fixtures, failure modes and common mistakes, with videos.
Chris Thomas
Oct 196 min read


Composite Test Fixture Buyer's Guide: ASTM D3039, D5379, D7078, D2344, D6641 and More
Which fixtures does a composites lab actually need? A practical guide to ASTM D3039 tensile grips, D5379 and D7078 shear fixtures, D2344 short-beam, D6641 CLC compression and open-hole fixtures.
christopherthomasb
Oct 34 min read


UniversalGripCo Arbor Press: Precision Force Application for Laboratory and Materials Testing
Arbor Press Cutting Sample Introduction In materials testing laboratories and engineering environments, many tasks require controlled compressive force to assemble components, prepare test fixtures, or install precision mechanical parts. While large automated systems such as universal testing machines handle tensile and compression testing, technicians frequently rely on smaller manual tools to prepare equipment and samples before testing begins. One of the most reliable too
Mark Edwards
Mar 266 min read
bottom of page
