top of page
Search
All Posts


Gauge Length Selection for Video Extensometers Across ASTM Standards
This article provides a detailed, standards-driven guide to gauge length selection for video extensometers, with practical examples from ASTM D638, ASTM D412, ASTM E8, and ASTM D3039.
christopherthomasb
Jan 165 min read


The Complete Guide to Sample Marking for Video Extensometers
Whether performing routine tensile testing, measuring Poisson’s ratio, or conducting full-field strain analysis, correct sample marking is essential for reliable, repeatable strain data. This article provides a comprehensive guide to sample marking for video extensometers, explains how digital image correlation (DIC) works, and outlines best practices for achieving high-quality strain measurements across a wide range of materials.
christopherthomasb
Jan 75 min read


ASTM F1306: Puncture Resistance Testing for Medical Device Packaging and Med. Device Integrity
ASTM F1306 slow-rate penetration fixtures for medical device packaging, showing a compliant puncture resistance fixture, defined probe geometry, and rigid specimen clamping for mounting on a universal testing machine to ensure accurate, repeatable puncture force measurements. Slow Rate Penetration (Puncture Resistance) Testing of Medical Packaging Medical device packaging plays a critical role in maintaining sterility, protecting devices during distribution, and ensuring pati
christopherthomasb
Jan 24 min read


Video Extensometers VS. Clip-On Extensometers
If you’re trying to choose between a video (non-contact) extensometer and a clip-on (contact) extensometer, the best answer depends on what you test, how often you change specimen types, your accuracy needs, your risk tolerance for damaging samples, and—very often—budget.
christopherthomasb
Dec 31, 20256 min read


How to Choose the Right Grips for Tensile Testing
Selecting the correct grips for tensile testing is one of the most important — and most overlooked — decisions in any materials testing setup.
christopherthomasb
Dec 29, 20256 min read


When Should You Use an Extensometer?
Learn when to use an extensometer and why it is important for tensile testing on a universal testing machine.
christopherthomasb
Nov 10, 20253 min read


What is a Universal Testing Machine?
A Universal Testing Machine (UTM) is a mechanical-testing instrument designed to apply controlled axial forces (and sometimes other modes of loading) to material specimens and then measure the specimen’s response (force, displacement, strain, deformation, failure) under well-defined conditions.
christopherthomasb
Nov 3, 20258 min read


Stringing Together our Rope Testing Grips, String Grips, and Wire Grips ASTMs
One of our bollard grips for our Stringing Together our Ropes, Strings, and Wire Grips ASTMs Blog Post
christopherthomasb
Sep 17, 20254 min read


Our 3 Most Common Grip Adapters
A Beginner friendly Guide to Universal Grip's Adapters
christopherthomasb
Aug 12, 20252 min read


Revisiting Universal Grip's Manual Testers (Analog Testing Machines)
Manual Force Tensile Testing Machine
christopherthomasb
Aug 12, 20253 min read


Thermal Environmental Chambers for Universal Testing Machines
Universal Grip’s Thermal Environmental Chambers are engineered to provide controlled hot and cold test environments for tensile, compression, flexural, peel, shear, and other mechanical tests.
christopherthomasb
Aug 8, 20254 min read


Clip-On Extensometer Purchasing & Configuration Guide
A clip-on extensometer is a mechanical strain measurement device that attaches directly to the specimen during a tensile or compression test.
christopherthomasb
Aug 7, 20253 min read


ASTM D624 Complete Guide: Rubber Tear Strength Test Procedure, Dies, Grips, Machines and Extensometers
The complete ASTM D624 guide: Die A, B, C, T and CP specimens and thickness, nicking, test speeds, grips, choosing a Mark-10 or Galdabini machine, where extensometers fit, calculations, the median rule, precision, ISO 34-1 and FAQs.
Chris Thomas
Aug 1, 202521 min read


Step-by-Step Guide: Conducting the Charpy Impact Test (ASTM E23)
tep-by-Step Guide: Conducting the Charpy Impact Test (ASTM E23)
christopherthomasb
Mar 30, 20252 min read


Fully Automated Robotic Tensile Testing Cells
Universal Grip is at the forefront of innovation with its fully automated robotic cells for tensile testing
christopherthomasb
Mar 29, 20252 min read


How to Run ASTM E8 - Equipment List & Procedure
The ASTM E8 tensile test is a fundamental method for evaluating the mechanical properties of metals. Proper setup is critical.
christopherthomasb
Mar 29, 20253 min read


What is a Video Extensometer?
What is a Video Extensometer and How Do They Work?
christopherthomasb
Mar 21, 20253 min read


What is Tensile Testing?
What is Tensile Testing and Why is it Important? What Type of Equipment do I need to perform Tensile Testing?
christopherthomasb
Mar 21, 20253 min read
bottom of page
