Home › Products › Shear Fixtures › Tile Adhesive Shear Fixture EN 12003





Tile Adhesive Shear Fixture EN 12003
Compression shear fixture for tile adhesives and mortars with a 12–45 mm jaw opening, rated to 20 kN, for EN 1324 Fig. 2, ANSI A118.1 and EN 12003.
Brand: Universal Grip | Model: UGC-SF-220 | ● Configured to order
Compression shear for EN 1324 Fig. 2, ANSI A118.1, EN 12003 and ISO 13007-2 Fig. 9
12–45 mm (0.47–1.77 in) jaw opening for different tile and substrate thicknesses
Rated to 20 kN (4,496 lbf) maximum test load
Rigid 13.15 kg nickel-plated steel body
Standard 0 to +70 °C version; special version for -40 to +100 °C
Ø 15.9 mm (5/8 in) female clevis; Ø 56 mm upper platen ordered separately
Standards: EN 12003 · EN 1324 · ANSI A118.1 · ISO 13007-2
Trusted by Global Companies


























Compression shear testing of tile adhesives and mortars
The UGC-SF-220 is for tile setting material manufacturers and construction labs that measure how well an adhesive or mortar holds a tile in shear. It covers both the European and ISO classification methods (EN 1324 Fig. 2, NF EN 12003, ISO 13007-2 Fig. 9) and ANSI A118.1, the US specification for dry-set cement mortar, so one fixture can serve a lab that tests for both markets.
How it works
The bonded specimen is clamped in the fixture, whose jaw opening adjusts from 12 to 45 mm (0.47 to 1.77 in) to suit different tile and substrate thicknesses. An upper compression platen then pushes down on the free tile until the adhesive layer fails in shear. The 13.15 kg nickel-plated steel body is built rigid for its 20 kN (4,496 lbf) rating, which keeps the tile square to the platen as the load rises.
The fixture connects with a female clevis with a Ø 15.9 mm (5/8 in) pin; other couplings are available on request. The Ø 56 mm upper compression platen is a required accessory and is ordered separately from our compression platens.
Standard and temperature versions
Standard version – 0 to +70 °C (32 to 158 °F), for tests at laboratory conditions after the specimen has been conditioned.
Temperature version – -40 to +100 °C (-40 to 212 °F), for labs that test shear strength at low or elevated temperature in an environmental chamber.
Machine fit
A 25 kN benchtop universal testing machine covers the full rating. For other frames, adapters are available. Specify the specimen size, test temperature range and machine coupling when ordering.
Typical applications
Ceramic tile adhesives
Cementitious dry-set mortars
Dispersion adhesives
Building materials testing and certification labs
Related tile adhesive fixture
For the arrangement of EN 1324 Fig. 3, EN 12003 Fig. 3 and ISO 13007-2 Fig. 10, use UGC-SF-210, the dispersion adhesive shear fixture. More options are on our shear fixtures and adhesives testing pages. Tell us your standard, specimen size and test temperatures, and we will quote the fixture with the matching platen.
Tile Adhesive Shear Fixture EN 12003 Specifications
TEST TYPE
Shear, compression mode
MAX. LOAD
20 kN (4,496 lbf)
JAW OPENING
12–45 mm
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin; others on request
MATERIAL
Steel, nickel-plated
TEMPERATURE RANGE
0 … +70 °C; -40 … +100 °C version
WEIGHT
13.15 kg
ACCESSORY
Upper compression platen Ø 56 mm (not included)
STANDARDS
EN 1324 Fig. 2, ANSI A118.1, EN 12003, ISO 13007-2 Fig. 9
DRAWINGS
Dimensional drawings on data sheet; 3D models on request
PART REF.
UGC-SF-220
Models & Options
Standard version — 0 … +70 °C (Specify at order)
Temperature version — -40 … +100 °C (Specify at order)
Upper compression platen Ø 56 mm — Required accessory, ordered separately (On request)
Other couplings — Alternatives to the Ø 15.9 mm female clevis (On request)
What's Included
1 tile adhesive shear fixture with Ø 15.9 mm female clevis coupling
Upper compression platen Ø 56 mm not included – order separately
Supported Test Standards
EN 12003 — Adhesives for tiles – shear adhesion strength of reaction resin adhesives
EN 1324 — Adhesives for tiles – shear adhesion strength of dispersion adhesives
ANSI A118.1 — Dry-set cement mortar for tile installation
ISO 13007-2 — Ceramic tiles – grouts and adhesives – test methods for adhesives
Compatible Grips & Fixtures
Compression platens — Ø 56 mm upper platen required for the test
Environmental chambers — For the -40 to +100 °C version
25 kN benchtop machine — Covers the 20 kN rating
Adhesives testing — Fixtures for adhesives and bonded assemblies
Shear testing — Overview of shear test methods
“Customer quote”
Related Equipment
UGC-SF-210 Dispersion Adhesive Shear Fixture EN 1324
Shear adhesion fixture for dispersion and tile adhesives, rated to 20 kN, for EN 1324 Fig. 3, EN 12003 Fig. 3 and ISO 13
UGC-SF-230 V-Notched Beam Shear Fixture
Iosipescu V-notched beam shear fixture for composite laminates, rated to 50 kN, with the compression probe and specimen
UGC-SF-200 Bolt and Pin Shear Platens
Clevis-mounted steel shear platens for single and double shear testing of bolts and pins in tension mode, with interchan
UGC-SF-240 Plastics Shear Punch Fixture
Punch-tool shear fixture for plastic sheet to ASTM D732 that cuts a 25.4 mm disk, offered as a 20 kN clevis version or a
Tile Adhesive Shear Fixture EN 12003 FAQ
Which standards is the fixture used for?
Tile adhesive shear tests such as EN 1324 Fig. 2, NF EN 12003, ISO 13007-2 Fig. 9 and ANSI A118.1.
Can I use it for ANSI A118.1 dry-set mortar testing?
Yes. ANSI A118.1 is one of the methods the fixture is built for, alongside the European and ISO tile adhesive standards.
What tile thicknesses fit?
The jaw opening adjusts from 12 to 45 mm (0.47 to 1.77 in).
Is the upper platen included?
No. The Ø 56 mm upper compression platen is a required accessory ordered separately.
Can I test at low or high temperature?
Yes, a special version covers -40 to +100 °C for use in an environmental chamber. The standard version is rated 0 to +70 °C.
What about EN 1324 Fig. 3?
That arrangement is covered by UGC-SF-210, our dispersion adhesive shear fixture.




