Home › Products › Shear Fixtures › Dispersion Adhesive Shear Fixture EN 1324





Dispersion Adhesive Shear Fixture EN 1324
Shear adhesion fixture for dispersion and tile adhesives, rated to 20 kN, for EN 1324 Fig. 3, EN 12003 Fig. 3 and ISO 13007-2 Fig. 10 tests.
Brand: Universal Grip | Model: UGC-SF-210 | ● Configured to order
Set up for EN 1324 Fig. 3, EN 12003 Fig. 3, ISO 13007-2 Fig. 10 and EN 12004-2 Fig. 4
Loads the adhesive layer parallel to the bond, in pure shear
Rated to 20 kN (4,496 lbf) maximum test load
Nickel-coated steel resists corrosion from cementitious and water-based products
Ø 15.9 mm (5/8 in) female clevis; other couplings on request
Approx. 2.8 kg, specified for 0 to +70 °C
Standards: EN 1324 · EN 12003 · ISO 13007-2 · EN 12004-2
Trusted by Global Companies


























Shear adhesion testing of dispersion and tile adhesives
The UGC-SF-210 is for building chemicals manufacturers and construction products labs that classify tile adhesives by their shear adhesion strength. It holds a bonded tile assembly and loads it parallel to the adhesive layer until the bond fails in shear, following the arrangement shown in EN 1324 Fig. 3, EN 12003 Fig. 3, ISO 13007-2 Fig. 10 and EN 12004-2 Fig. 4. One fixture therefore covers the dispersion adhesive and reaction resin adhesive methods used in European and ISO product classification.
How it works
The bonded specimen is placed in the fixture so that one tile is restrained and the other is pushed along the bond plane. Because the load acts parallel to the adhesive layer, the result is a shear adhesion strength rather than a tensile pull-off value, and it can be compared directly across conditioning regimes such as dry, water immersion or heat aging specified by the standard you follow.
The body is nickel-coated steel, which stands up to the alkaline residue and moisture that tile adhesive specimens bring onto the test bench. The fixture weighs approx. 2.8 kg and is specified for 0 to +70 °C (32 to 158 °F).
Machine fit
The fixture is rated to 20 kN (4,496 lbf) and connects with a female clevis with a Ø 15.9 mm (5/8 in) pin. A 25 kN benchtop universal testing machine covers the full rating with margin; a 10 kN frame is enough where your adhesive classes fail well below that. Other couplings and adapters are available.
Which tile adhesive fixture?
The same standards contain more than one test figure. This fixture covers EN 1324 Fig. 3 and ISO 13007-2 Fig. 10. For the compression-mode arrangement of EN 1324 Fig. 2 and ISO 13007-2 Fig. 9, and for ANSI A118.1 testing in the US, use UGC-SF-220, the tile adhesive shear fixture. If you are not sure which figure your specification calls for, send us the standard and clause and we will confirm.
Typical applications
Dispersion (ready-mixed) tile adhesives
Ceramic tile adhesives
Building chemicals development and QC
Third-party construction products labs
For block-shear tests on rigid adhesive joints, see UGC-SF-170, the adhesive shear strength fixture, and our adhesives testing page. Tell us the standard and figure, your tile specimen size and machine coupling, and we will quote the fixture.
Dispersion Adhesive Shear Fixture EN 1324 Specifications
TEST TYPE
Shear adhesion strength
MAX. LOAD
20 kN (4,496 lbf)
LOADING
Parallel to the adhesive layer
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin; others on request
MATERIAL
Steel, nickel coating
TEMPERATURE RANGE
0 … +70 °C
WEIGHT
Approx. 2.8 kg
SCOPE OF DELIVERY
1 fixture
STANDARDS
EN 1324 Fig. 3, EN 12003 Fig. 3, ISO 13007-2 Fig. 10, EN 12004-2 Fig. 4
DRAWINGS
Dimensional drawings on data sheet; 3D models on request
PART REF.
UGC-SF-210
Models & Options
Shear adhesion fixture — State the standard and figure plus tile specimen size (Specify at order)
Other couplings — Alternatives to the Ø 15.9 mm female clevis (On request)
What's Included
1 shear adhesion fixture, nickel-coated steel
Ø 15.9 mm (5/8 in) female clevis coupling
Adapters for other machine couplings available on request
Supported Test Standards
EN 1324 — Adhesives for tiles – shear adhesion strength of dispersion adhesives
EN 12003 — Adhesives for tiles – shear adhesion strength of reaction resin adhesives
ISO 13007-2 — Ceramic tiles – grouts and adhesives – test methods for adhesives
EN 12004-2 — Adhesives for ceramic tiles – test methods
Compatible Grips & Fixtures
25 kN benchtop machine — Covers the 20 kN rating with margin
10 kN benchtop machine — For lower-strength adhesive classes
Adhesives testing — Shear, peel and tensile fixtures for adhesives
Shear testing — Overview of shear test methods
Adapters — Fit the Ø 15.9 mm clevis to other couplings
“Customer quote”
Related Equipment
UGC-SF-170 Adhesive Shear Strength Fixture ISO 13445
Block-shear fixture for adhesive bonds between rigid substrates, rated to 20 kN, with interchangeable inserts for ASTM D
UGC-SF-220 Tile Adhesive Shear Fixture EN 12003
Compression shear fixture for tile adhesives and mortars with a 12–45 mm jaw opening, rated to 20 kN, for EN 1324 Fig. 2
UGC-SF-200 Bolt and Pin Shear Platens
Clevis-mounted steel shear platens for single and double shear testing of bolts and pins in tension mode, with interchan
UGC-SF-190 Reinforced Concrete Shear Fixture DIN 488
Weld shear fixtures for reinforcing steel lattice girders and welded wire fabric, bar diameters 3–32 mm and capacities f
Dispersion Adhesive Shear Fixture EN 1324 FAQ
Which test figures does this fixture cover?
EN 1324 Fig. 3, EN 12003 Fig. 3, ISO 13007-2 Fig. 10 and EN 12004-2 Fig. 4.
How is it different from UGC-SF-220?
UGC-SF-220 covers the compression arrangement of EN 1324 Fig. 2 and ISO 13007-2 Fig. 9, plus ANSI A118.1. This fixture covers the Fig. 3 / Fig. 10 arrangement.
What is the maximum load?
20 kN (4,496 lbf).
Why nickel-coated steel?
The coating protects the fixture from moisture and alkaline residue from cementitious and water-based specimens.
What coupling does it have?
A female clevis with a Ø 15.9 mm (5/8 in) pin. Other couplings and adapters are available on request.
Which machine should I use?
A 25 kN benchtop machine covers the full rating; see our universal testing machines for other sizes.




