top of page

Home  ›  Products  ›  Shear Fixtures  ›  Plastics Shear Punch Fixture

UGC-SF-240 plastics shear punch fixture for ASTM D732 punch-tool shear testing by Universal Grip
UGC-SF-240 plastics shear punch fixture for ASTM D732 punch-tool shear testing by Universal Grip
UGC-SF-240 Plastics Shear Punch Fixture by Universal Grip, view 2
UGC-SF-240 Plastics Shear Punch Fixture by Universal Grip, view 3
Product photo 4

Plastics Shear Punch Fixture – ASTM D732, 20 kN or 100 kN

Punch-tool shear fixture for plastic sheet to ASTM D732 that cuts a 25.4 mm disk, offered as a 20 kN clevis version or a 100 kN platen-loaded version.

Brand: Universal Grip  |  Model: UGC-SF-240  |  ● Configured to order

  • Built for the ASTM D732 punch-tool shear strength test of plastics

  • Punch cuts a 25.4 mm (1 in) diameter disk from the clamped sheet

  • 20 kN (4,496 lbf) version with a clevis-coupled punch

  • 100 kN (22,480 lbf) version loaded directly between two compression platens

  • Nickel-plated steel construction, approx. 4 kg (8.8 lb)

  • Usable from 0 to +70 °C (32 to 158 °F); other ranges on request

Standards: ASTM D732

Trusted by Global Companies

Punch-tool shear fixture for plastics

The UGC-SF-240 measures the shear strength of plastics by the punch-tool method of ASTM D732. Polymer QC labs use it on plastic sheet, molded plastics and composite laminates when they need a straightforward, repeatable shear value without machining dog-bone or notched specimens.

 

How it works

The sheet specimen is clamped in the fixture, and the fixture sits on a compression platen. As the machine closes, a punch is pushed through the clamped sheet and cuts out a disk 25.4 mm (1 in) in diameter. The peak force divided by the sheared area gives the shear strength. Because the whole test runs in compression mode, setup is quick: clamp the sheet, position the fixture on the platen and start the test.

Our complete ASTM D732 guide covers specimen preparation, procedure and the shear strength calculation; this page focuses on the fixture.

 

Two capacities

  • 20 kN version: the punch carries a female clevis (Ø 15.9 mm / 5/8 in or Ø 20 mm pin) and mounts on the crosshead. Only a lower compression platen is needed.

  • 100 kN version: the punch has no coupling. The fixture is loaded between an upper and a lower compression platen, which suits thicker or stronger sheet that needs more force to shear.

Both versions are nickel-plated steel, weigh approx. 4 kg (8.8 lb) and are rated for 0 to +70 °C; other temperature ranges are available on request.

 

Platens and machines

Compression platens are not included. Tell us which platens you already have, or add them from our compression platens range. The 20 kN version fits a 25 kN benchtop UTM, and the 100 kN version a 100 kN benchtop UTM or a larger Galdabini floor-standing frame. For thin, lower-strength sheet, a Mark-10 F-series motorized tester (up to 1,500 lbF, 6.7 kN) can also run the 20 kN version, provided the expected peak force stays within the frame. Where the clevis on your machine differs, our adapters bridge the gap.

For tensile, flexural and compression tooling for polymers, see our plastics testing page.

Tell us the capacity you need, your machine coupling and the platens on hand, and we will quote the right configuration.

Product video

At a glance

  • Test type: Punch shear, compression mode

  • Max. load: 20 kN (4,496 lbf) or 100 kN (22,480 lbf)

  • Punch diameter: 25.4 mm (1 in)

  • Coupling, 20 kN version: Female clevis, Ø 15.9 mm or Ø 20 mm pin

  • Coupling, 100 kN version: None; loaded between platens

  • Platens required: Lower platen (20 kN) / upper and lower platens (100 kN)

Plastics Shear Punch Fixture Specifications

TEST TYPE

Punch shear, compression mode

 

MAX. LOAD

20 kN (4,496 lbf) or 100 kN (22,480 lbf)

 

PUNCH DIAMETER

25.4 mm (1 in)

 

COUPLING, 20 KN VERSION

Female clevis, Ø 15.9 mm or Ø 20 mm pin

 

COUPLING, 100 KN VERSION

None; loaded between platens

 

PLATENS REQUIRED

Lower platen (20 kN) / upper and lower platens (100 kN)

 

MATERIAL

Steel, nickel-plated

 

TEMPERATURE RANGE

0 … +70 °C (others on request)

 

WEIGHT

Approx. 4 kg (8.8 lb)

 

ACCESSORIES

Compression platens (not included)

 

PART REF.

UGC-SF-240

 

Models & Options

  • 20 kN version — Punch with female clevis (Ø 15.9 mm or Ø 20 mm); lower compression platen required (Specify at order)

  • 100 kN version — Punch without coupling; upper and lower compression platens required (Specify at order)

  • Compression platens — Upper and/or lower platens to suit your machine (Specify at order)

  • Other couplings or temperature range — Beyond the standard clevis sizes or 0 … +70 °C (On request)

What's Included

  • Shear punch fixture with specimen clamp and 25.4 mm (1 in) punch

  • Female clevis coupling on the punch (20 kN version only)

  • Compression platens are not included and are ordered separately

Supported Test Standards

  • ASTM D732 — Shear strength of plastics by punch tool

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SF-230 V-Notched Beam Shear Fixture

UGC-SF-230 V-Notched Beam Shear Fixture

Iosipescu V-notched beam shear fixture for composite laminates, rated to 50 kN, with the compression probe and specimen

UGC-SF-250 V-Notched Rail Shear Fixture

UGC-SF-250 V-Notched Rail Shear Fixture

Pair of V-notched rail shear grips for composites to ASTM D7078, in 50 kN and 100 kN versions plus a -100 to +600 °C hig

UGC-SF-220 Tile Adhesive Shear Fixture EN 12003

UGC-SF-220 Tile Adhesive Shear Fixture EN 12003

Compression shear fixture for tile adhesives and mortars with a 12–45 mm jaw opening, rated to 20 kN, for EN 1324 Fig. 2

UGC-SF-260 Kramer Shear Cell for Food

UGC-SF-260 Kramer Shear Cell for Food

Ten-blade Kramer shear-compression cell for measuring the firmness of fruit, vegetables, meat and processed foods, rated

Plastics Shear Punch Fixture FAQ

What standard is this fixture for?

ASTM D732, the punch-tool shear strength test for plastics. See our ASTM D732 guide for procedure and calculations.

 

What is the difference between the 20 kN and 100 kN versions?

The 20 kN version has a clevis-coupled punch that mounts on the crosshead and needs only a lower platen. The 100 kN version has no coupling and is loaded between upper and lower platens.

 

Are compression platens included?

No. Order them with the fixture from our compression platens range, or tell us what you already have.

 

What size disk does the punch cut?

A disk 25.4 mm (1 in) in diameter.

 

Which clevis sizes are available?

The 20 kN version comes with a Ø 15.9 mm (5/8 in) or Ø 20 mm female clevis. Other couplings are available on request.

 

Can it test composites as well as plastics?

Yes. Composite laminates are among its applications, alongside plastic sheet and molded plastics.

 

Need help configuring a shear fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page