top of page

Home  ›  Products  ›  Shoulder and Button Head Grips  ›  Liquid-Applied Membrane Adhesion Fixture EN 14891

UGC-SH-090 EN 14891 crack-bridging fixture with guided blocks and wing-nut clamping plates by Universal Grip
UGC-SH-090 EN 14891 crack-bridging fixture with guided blocks and wing-nut clamping plates by Universal Grip
UGC-SH-090 Liquid-Applied Membrane Adhesion Fixture EN 14891 by Universal Grip, view 2
Product photo 3
Product photo 4

Liquid-Applied Membrane Adhesion Fixture EN 14891 – A.8 / A.2

Guided fixture that opens a crack beneath liquid-applied waterproofing for tiles to EN 14891 A.8, with a tensile adhesion version for A.2.

Brand: Universal Grip  |  Model: UGC-SH-090  |  ● Configured to order

  • Built for crack-bridging tests to EN 14891 Annex A.8

  • Guide rods keep both blocks aligned while the crack opens

  • Clamping plates with wing nuts for tool-free specimen mounting

  • Hardened, nickel-plated steel for long service life

  • Crack-bridging version rated 10 kN (2,248 lbf) with 5/8 in clevis

  • Separate 5 kN tensile adhesion version for EN 14891 Annex A.2

Standards: EN 14891

Trusted by Global Companies

Testing waterproofing membranes for tiled floors and walls

Liquid-applied waterproofing beneath ceramic tiles has to stay watertight when the substrate below it cracks. EN 14891 sets out how to check that. The UGC-SH-090 is a test fixture for liquid-applied waterproofing products used under tiling, built mainly for the crack-bridging test of EN 14891 Annex A.8. A separate version handles tensile adhesion strength to Annex A.2. Building chemical manufacturers, tile adhesive producers and construction materials labs use it in product development and certification work.

 

How the crack-bridging fixture works

The coated substrate is clamped between two guided blocks, each with a clamping plate tightened by wing nuts. As the testing machine pulls the blocks apart, the substrate cracks and the gap opens beneath the membrane. Guide rods keep the two blocks aligned the whole time, so the crack opens evenly rather than twisting or peeling the membrane at one corner. The test records how the membrane bridges the widening crack.

Wing-nut clamping means specimens are mounted and removed without tools. The fixture is hardened, nickel-plated steel, rated to 10 kN (2,248 lbf), with a female clevis coupling for a 15.9 mm (5/8 in) pin.

 

Versions

  • Crack-bridging, EN 14891 A.8: guided fixture, 10 kN, female clevis Ø 15.9 mm (5/8 in).

  • Tensile adhesion, EN 14891 A.2: pull-off fixture, 5 kN (1,124 lbf), male clevis Ø 16 mm.

Other couplings are available on request or through our adapters. The standard operating range is 0 to 70 °C, with other ranges on request, which is useful when a test program includes conditioned specimens tested in an environmental chamber.

 

Machine fit

Both versions suit a Galdabini 10 kN bench-top universal testing machine; the 5 kN adhesion version also fits a 5 kN frame. For pull-off tests on paints and coatings, see the coating bond strength fixture.

 

Typical applications

Waterproofing membranes under tiles, tile adhesives and building chemicals, construction product certification and building materials laboratories. See also our adhesives testing page.

Tell us which test you need (crack-bridging A.8 or tensile adhesion A.2), your substrate or specimen size and your machine coupling, and we will quote the right fixture. Request a quote.

Product video

At a glance

  • Max. load: 10 kN (crack-bridging); 5 kN (tensile adhesion)

  • Test type: Crack-bridging ability; tensile adhesion strength

  • Material: Steel, hardened, nickel-plated

  • Coupling: Female clevis, Ø 15.9 mm (5/8 in) pin; others on request

  • Temperature range: 0 to 70 °C; other ranges on request

  • Operation: Manual clamping with wing nuts

Liquid-Applied Membrane Adhesion Fixture EN 14891 Specifications

MAX. LOAD

10 kN (crack-bridging); 5 kN (tensile adhesion)

 

TEST TYPE

Crack-bridging ability; tensile adhesion strength

 

MATERIAL

Steel, hardened, nickel-plated

 

COUPLING

Female clevis, Ø 15.9 mm (5/8 in) pin; others on request

 

TEMPERATURE RANGE

0 to 70 °C; other ranges on request

 

OPERATION

Manual clamping with wing nuts

 

SCOPE OF DELIVERY

1 fixture

 

STANDARDS

EN 14891

 

PART REF.

UGC-SH-090

 

Models & Options

  • Crack-bridging, EN 14891 A.8 — Guided fixture, 10 kN, female clevis Ø 15.9 mm (5/8 in) (Specify at order)

  • Tensile adhesion, EN 14891 A.2 — Pull-off fixture, 5 kN, male clevis Ø 16 mm (Specify at order)

  • Other coupling or temperature range — Coupling or temperature range outside the standard (On request)

What's Included

  • 1 fixture in the version ordered

  • Clamping plates with wing nuts (crack-bridging version)

  • Dimensional drawings on page 2 of the data sheet; certified drawings and 3D models on request

Supported Test Standards

  • EN 14891 — Liquid-applied water-impermeable products for use beneath ceramic tiling

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SH-080 Net Holding Fixture 10 kN

UGC-SH-080 Net Holding Fixture 10 kN

Pin-bar fixture pair for tensile tests on nets and open mesh up to 10 kN: meshes hook over a row of pins and a clamping

UGC-SH-100 Adjustable Double Hook Grip

UGC-SH-100 Adjustable Double Hook Grip

Compact lower grip with two screw-adjusted hook arms for pulling loops, rings and eyelets, connected by an M12 male thre

UGC-SH-070 Pipe Tensile Test Grips ISO 6259-3

UGC-SH-070 Pipe Tensile Test Grips ISO 6259-3

Shoulder grips for dumbbell specimens machined from thermoplastic pipe walls, in two versions for 12 to 50 mm and 30 to

UGC-SH-110 Fine Ceramics Tensile Fixture ISO 15490

UGC-SH-110 Fine Ceramics Tensile Fixture ISO 15490

Steel tensile fixtures for monolithic fine ceramics to ASTM C1273 and ISO 15490, with seats for GIRI, Fig. 15 and Karlsr

Liquid-Applied Membrane Adhesion Fixture EN 14891 FAQ

Which EN 14891 tests does this cover?

The standard fixture is for the crack-bridging test of Annex A.8. A separate pull-off fixture is available for tensile adhesion strength to Annex A.2.

 

How does the fixture keep the crack even?

Guide rods keep the two clamping blocks aligned as they separate, so the crack opens evenly beneath the membrane.

 

What are the load ratings?

10 kN (2,248 lbf) for crack-bridging and 5 kN (1,124 lbf) for tensile adhesion.

 

What couplings do the versions use?

The crack-bridging fixture has a female clevis for a 15.9 mm (5/8 in) pin; the adhesion fixture has a male clevis Ø 16 mm. Other couplings are on request or via adapters.

 

Can I test at other temperatures?

The standard range is 0 to 70 °C; other ranges are available on request.

 

Need help configuring a shoulder and button head grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page