Home › Products › Wedge Grips › Pneumatic Wedge Grip 10-20 kN





Pneumatic Wedge Grip 10-20 kN – for Temperature Chambers
Pneumatic wedge grips with the control piston outside the chamber, for -70 to +350 °C tests on short, low-friction specimens such as fiberglass.
Brand: Universal Grip | Model: UGC-WG-140 | ● Configured to order
Control piston is mounted separately, outside the chamber's hot zone
Clamping force rises in proportion to the tensile load
Holds short, low-friction specimens such as fiberglass laminates
Temperature range -70 to +350 °C (-94 to +662 °F)
10 and 20 kN grips; series extends to 100 kN pneumatic and 250 kN hydraulic
Pyramid serrated jaws for flat, V-jaws for round specimens
Standards: ASTM D3039 · ASTM D6641 · ISO 14126
Trusted by Global Companies


























Pneumatic wedge grips built for the temperature chamber
Pneumatic cylinders and their seals are best kept away from chamber heat. The UGC-WG-140 is designed around that: the control piston is mounted separately, outside the hot zone, and only the wedge grip itself sits inside the chamber. The grips are rated for -70 to +350 °C (-94 to +662 °F) and offered at 10 kN (2,248 lbf) and 20 kN (4,496 lbf), as part of a series that runs to 100 kN pneumatic and 250 kN hydraulic.
How it works
Air pressure at the external piston drives the wedges forward to close the jaws. Because the jaws are wedge-mounted, the clamping force then rises in proportion to the tensile load. That combination of a firm initial grip and growing clamping force is what short, low-friction specimens such as fiberglass laminates need to avoid slipping. On the 20 kN grip the jaw opening is 0–17 mm (0–0.67 in).
The series
10 kN pneumatic: female clevis for a 15.9 mm (5/8 in) pin
20 kN pneumatic: opening 0–17 mm, -70 to +350 °C
50 kN pneumatic: clevis for a 31.8 mm (1-1/4 in) pin
100 kN pneumatic: 31 kN preload at 7 bar (102 psi), up to 184 kN clamping, 50 kg
100 kN hydraulic: clevis for a 40 mm pin, 50 kg
250 kN hydraulic: clevis for a 60 mm pin, 120 kg; available with a mounted combined loading compression (CLC) fixture for tests such as ASTM D6641 and ISO 14126
Hydraulic versions are driven by an air-operated hydraulic pump unit with Open, Stop and Close positions.
How it differs from our other pneumatic wedge grips
The UGC-PG-050 pneumatic wedge grips cover the same 10 and 20 kN loads with the pneumatic actuation built into the grip and centric jaw movement; their 10 kN stainless version runs from -70 to +280 °C and the 20 kN from 0 to +180 °C. The WG-140 moves the piston out of the chamber, extends the range to +350 °C and scales to 250 kN. The UGC-PG-170 non-shift grip is a third option, with horizontal-only jaw motion for brittle specimens such as ceramics at 0 to +70 °C.
Typical applications and machine fit
Fiberglass and composite laminates in tests such as ASTM D3039, high-temperature metals, and short or low-friction specimens. Pair the 10 kN grip with a Galdabini 10 kN frame and the 20 kN grip with a 25 kN frame, both fitted with one of our environmental chambers.
Tell us the capacity, pneumatic or hydraulic operation, chamber temperature range, jaw type and coupling, and we will configure the system. Request a quote.
Pneumatic Wedge Grip 10-20 kN Specifications
MAX. LOAD
10 kN or 20 kN (series up to 250 kN)
TEST TYPE
Tensile
JAW OPENING
0–17 mm (20 kN)
OPERATION
Pneumatic, separate control piston
COUPLING
Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm pin; others via adapter
MATERIAL
Steel, nickel-plated
TEMPERATURE RANGE
-70 to +350 °C
SCOPE OF SUPPLY
1 pair of grips
PART REF.
UGC-WG-140
Models & Options
Name — Description (Part #)
10 kN pneumatic — Ø 15.9 mm pin coupling (Specify at order)
20 kN pneumatic — Opening 0–17 mm, -70 to +350 °C (Specify at order)
50 kN pneumatic — Ø 31.8 mm pin coupling (Specify at order)
100 kN pneumatic — Preload 31 kN at 7 bar, up to 184 kN clamping, 50 kg (Specify at order)
100 kN hydraulic — Ø 40 mm pin coupling, 50 kg (Specify at order)
250 kN hydraulic — Ø 60 mm pin coupling, 120 kg (Specify at order)
CLC fixture — Combined loading compression fixture mounted on the 250 kN hydraulic grips (On request)
Pyramid jaws — Flat specimens; 0–15 or 15–30 mm on the 100 kN versions (Specify at order)
V-jaws — Round specimens; Ø 5–18 or 18–30 mm on the 100 kN versions (Specify at order)
Hydraulic pump unit — Air-operated, adjustable to 315 bar, Open-Stop-Close switch (Specify at order)
What's Included
One pair of wedge grips with separate control pistons, in the capacity ordered
Jaws are ordered separately (pyramid for flat, V for round specimens)
Hydraulic versions need the pump unit, ordered separately
Supported Test Standards
ASTM D3039 — Tensile properties of polymer matrix composites
ASTM D6641 — Combined loading compression of composites (250 kN hydraulic version with CLC fixture)
ISO 14126 — Compressive properties of fiber-reinforced plastics (250 kN hydraulic version with CLC fixture)
Compatible Grips & Fixtures
Environmental Chambers — Chambers for -70 to +350 °C testing
10 kN Benchtop Testing Machine — Galdabini frame for the 10 kN grip
25 kN Benchtop Testing Machine — Galdabini frame for the 20 kN grip
Pneumatic Wedge Grips 10-20 kN — Integrated pneumatic version, -70 to +280 °C
Pneumatic Non-Shift Wedge Grip 10-20 kN — Non-shift option for brittle specimens
Pneumatic Grips — Full range of air-operated grips
“Customer quote”
Related Equipment
UGC-WG-130 Manual Non-Shift Wedge Grips 50-250 kN
Manual wedge grips that close without moving the specimen axially, in 50, 100 and 250 kN sizes for flat and round specim
UGC-WG-150 Non-Shift Wedge Grip 20-50 kN
Self-clamping non-shift wedge grips whose jaws move only horizontally, in 20 and 50 kN sizes with 100 and 150 kN version
UGC-WG-120 Screw Action Wedge Grip 10 kN
10 kN grip that combines screw pre-tension with self-tightening wedge action for elastic, hard-to-hold specimens, with o
UGC-WG-160 Small Wedge Grip with Locking Function 10 kN
Spring-loaded 10 kN wedge grip that locks open for safe specimen loading, then springs closed to set a defined pre-clamp
Pneumatic Wedge Grip 10-20 kN FAQ
Why is the control piston separate?
Mounting the piston outside the chamber keeps it out of the hot zone, so the grips can run from -70 to +350 °C.
How is this different from the UGC-PG-050 pneumatic wedge grips?
The UGC-PG-050 has its actuation built in and reaches +280 °C (10 kN stainless version). The WG-140 moves the piston outside the chamber, reaches +350 °C and is part of a series up to 250 kN.
What specimens is it best for?
Short specimens with low friction, such as fiberglass and composite laminates, plus high-temperature metals.
How much clamping force does the 100 kN version produce?
31 kN of preload at 7 bar (102 psi), rising to as much as 184 kN as tensile load is applied.
Can the series be used for composite compression tests?
The 250 kN hydraulic grips are available with a mounted combined loading compression fixture for tests such as ASTM D6641 and ISO 14126.
What is the jaw opening?
0–17 mm (0.67 in) on the 20 kN grip.




