top of page

Home  ›  Products  ›  Wedge Grips  ›  Small Manual Wedge Grip 1 kN

UGC-WG-190 small manual wedge grip 1 kN with spring-loaded lever by Universal Grip
Product photo 1
Product photo 2
Product photo 3
Product photo 4

Small Manual Wedge Grip 1 kN – for Fine Wires and Films

Miniature 1 kN wedge grip with a spring-loaded lever and serrated 8 x 10 mm jaws for fine wires, fibers, films and micro components.

Brand: Universal Grip  |  Model: UGC-WG-190  |  ● Configured to order

  • Spring-loaded lever opens the jaws for quick loading

  • Wedge action tightens the jaws as the load increases

  • Serrated 8 x 10 mm (0.31 x 0.39 in) jaws included

  • Only 0.2 kg (0.44 lb) per grip including jaws

  • Temperature range -40 to +180 °C (-40 to +356 °F)

  • M4 female thread, or clevis adapter for a 15.9 mm (5/8 in) pin

Standards: ASTM D3822  ·  ASTM D882

Trusted by Global Companies

A miniature wedge grip for very small specimens

Fine wires, single fibers, thin films and micro components break at forces where the mass and size of a standard grip become a problem in themselves. The UGC-WG-190 is a miniature manual wedge grip rated at 1 kN (224.8 lbf) and weighing only 0.2 kg (0.44 lb) including jaws, so it adds very little mass to the load string and fits in tight spaces.

 

How it works

A spring-loaded lever opens the jaws quickly. The operator presses the lever, places the specimen and lets go; the spring brings the jaws onto the specimen. As load increases, the wedge action tightens the serrated jaws, so the hold grows with the force instead of relying on a hard initial squeeze that could cut a fine wire or fiber. The jaws have an 8 x 10 mm (0.31 x 0.39 in) pyramid-serrated clamping surface and open from 0 to 3 mm (0.12 in), enough for fine wire, monofilament, foil and thin film.

 

Coupling options

  • M4 female thread: for direct mounting on small load cells

  • With clevis adapter: female clevis for a 15.9 mm (5/8 in) pin

The grip is nickel-coated steel and works from -40 to +180 °C, with other ranges on request, so it can also be used inside an environmental chamber.

 

Typical applications

Fine wires and fibers, thin films and foils, micro components, and medical sutures and threads. These are specimens for tests such as ASTM D3822 on single fibers and ASTM D882 on thin film. For delicate film that should not see serrations, discuss other tensile grips with us.

 

Machine fit

A 1 kN grip belongs on a low-capacity system. Mark-10 F-series motorized testers are a good match: the 300 lbF model (about 1.33 kN) covers the grip's full rating, and the 100 lbF model suits finer specimens. On the Galdabini side, the 2.5 kN benchtop machine is the natural choice. The M4 thread or the clevis adapter, plus our adapters, cover the connection to either.

Let us know which coupling you need and the test temperature, and we will quote the grips. Request a quote.

Mechanical wedge grips

At a glance

  • Max. load: 1 kN

  • Test type: Tensile

  • Jaw opening: 0–3 mm

  • Clamping surface: 8 x 10 mm, pyramid serrated

  • Operation: Manual, spring-loaded lever

  • Coupling: M4 female thread; female clevis, Ø 15.9 mm (5/8 in) pin via adapter

Small Manual Wedge Grip 1 kN Specifications

MAX. LOAD

1 kN

 

TEST TYPE

Tensile

 

JAW OPENING

0–3 mm

 

CLAMPING SURFACE

8 x 10 mm, pyramid serrated

 

OPERATION

Manual, spring-loaded lever

 

COUPLING

M4 female thread; female clevis, Ø 15.9 mm (5/8 in) pin via adapter

 

MATERIAL

Steel, nickel-coated

 

TEMPERATURE RANGE

-40 to +180 °C (other ranges on request)

 

WEIGHT

0.2 kg per grip incl. jaws

 

PART REF.

UGC-WG-190

 

Models & Options

  • Name — Description (Part #)

  • M4 thread coupling — Direct mounting on small load cells (Specify at order)

  • With clevis adapter — Female clevis, Ø 15.9 mm (5/8 in) pin (Specify at order)

  • Other temperature ranges — Outside -40 to +180 °C (On request)

What's Included

  • Small manual wedge grip with serrated 8 x 10 mm jaws fitted

  • M4 thread coupling, or clevis adapter for a 15.9 mm pin, as ordered

  • Quantity (single grip or pair) confirmed at quote

Supported Test Standards

  • ASTM D3822 — Tensile properties of single textile fibers

  • ASTM D882 — Tensile properties of thin plastic sheeting

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-WG-170 Small Wedge Grip 10 kN

UGC-WG-170 Small Wedge Grip 10 kN

Compact self-tightening 10 kN wedge grips with 10 mm wide jaws for subsize metal and small plastic specimens, at about 1

UGC-WG-160 Small Wedge Grip with Locking Function 10 kN

UGC-WG-160 Small Wedge Grip with Locking Function 10 kN

Spring-loaded 10 kN wedge grip that locks open for safe specimen loading, then springs closed to set a defined pre-clamp

UGC-WG-150 Non-Shift Wedge Grip 20-50 kN

UGC-WG-150 Non-Shift Wedge Grip 20-50 kN

Self-clamping non-shift wedge grips whose jaws move only horizontally, in 20 and 50 kN sizes with 100 and 150 kN version

UGC-WG-140 Pneumatic Wedge Grip 10-20 kN

UGC-WG-140 Pneumatic Wedge Grip 10-20 kN

Pneumatic wedge grips with the control piston outside the chamber, for -70 to +350 °C tests on short, low-friction speci

Small Manual Wedge Grip 1 kN FAQ

What is the maximum specimen thickness?

The jaws open from 0 to 3 mm (0.12 in).

 

Are jaws included?

Yes, the grip comes with serrated 8 x 10 mm jaws fitted.

 

How does it connect to a load cell?

Directly via the M4 female thread, or with a clevis adapter for a 15.9 mm (5/8 in) pin. Adapters cover other connections.

 

Which tester suits a 1 kN grip?

A Mark-10 300 lbF tester covers the full 1 kN rating; the 2.5 kN Galdabini benchtop is the matching universal testing machine.

 

Can it be used at elevated temperature?

Yes, from -40 to +180 °C; other ranges on request.

 

How heavy is it?

0.2 kg (0.44 lb) per grip including jaws.

 

Need help configuring a wedge grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page