Home › Products › Wedge Grips › Small Wedge Grip with Locking Function 10 kN





Small Wedge Grip with Locking Function 10 kN
Spring-loaded 10 kN wedge grip that locks open for safe specimen loading, then springs closed to set a defined pre-clamping load.
Brand: Universal Grip | Model: UGC-WG-160 | ● Configured to order
Locking function holds the jaws open while the specimen is inserted
Springs close the jaws to a defined pre-clamping load on release
Three- or four-spring versions for a higher preload
Wedge action tightens the jaws further as the test load increases
Pyramid, sawtooth and V-jaws for flat and round specimens
2.23 kg (4.9 lb) per grip including jaws
Trusted by Global Companies


























A small wedge grip that locks open for loading
In high-throughput testing, the moment of loading a specimen is where time is lost and fingers get pinched. The UGC-WG-160 addresses both. It is a small, spring-loaded wedge grip rated at 10 kN (2,248 lbf) with a locking function that holds the jaws open while the operator inserts or removes the specimen.
How it works
With the jaws locked open, the specimen can be positioned without holding the grip apart by hand. Releasing the lock lets the springs close the jaws, applying a defined pre-clamping load that seats the specimen consistently from test to test. When tensile load is applied, the wedge action tightens the jaws further, so the grip force grows with the load instead of depending on how hard the operator clamped.
The standard version uses two springs. Versions with three or four springs give a higher pre-clamping load, which helps with stiffer specimens or where the initial bite has to be stronger before the wedges take over.
Jaws
Pyramid jaws, 40 x 34 mm: openings 0–10 or 6–16 mm
Pyramid jaws, 40 x 50 mm: openings 0–10 or 6–16 mm, for wider specimens
Sawtooth jaws, 40 x 34 mm: 1.25 mm tooth pitch, opening 0–10 mm
V-jaws: round specimens Ø 2–10 mm
Note that the serrated pyramid jaws are not intended for steel specimens; if you test steel strip or wire, discuss the jaw choice with us when you order.
Typical applications
Plastic tensile specimens, thin metal strips, wires and small rods, and high-throughput routine testing. Molded plastic bars for tests such as ASTM D638 and ISO 527-2 are a natural fit, as are thin metal strips of the kind tested to ASTM E8.
Machine fit
Each grip weighs 2.23 kg (4.9 lb) including jaws and couples through a female clevis for a 15.9 mm (5/8 in) or 20 mm pin, with other couplings via adapter. It is specified for 0 to +70 °C as standard; ask if you need another range. The grip suits a Galdabini 10 kN benchtop machine and, with an adapter, a Mark-10 1,500 lbF tester for loads within the tester's range. For a simpler 10 kN wedge grip without springs, compare the UGC-WG-110 universal wedge grip.
Specify the spring version, jaw types and coupling, and we will quote the grips for your lab. Request a quote.
Mechanical wedge grips
At a glance
Max. load: 10 kN
Test type: Tensile
Jaw opening: 0–16 mm flat; Ø 2–10 mm round
Clamping surface: 40 x 34 mm or 40 x 50 mm
Pre-clamping: Spring-loaded; 2 springs standard, 3 or 4 springs optional
Coupling: Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm pin; others via adapter
Small Wedge Grip with Locking Function 10 kN Specifications
MAX. LOAD
10 kN
TEST TYPE
Tensile
JAW OPENING
0–16 mm flat; Ø 2–10 mm round
CLAMPING SURFACE
40 x 34 mm or 40 x 50 mm
PRE-CLAMPING
Spring-loaded; 2 springs standard, 3 or 4 springs optional
COUPLING
Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm pin; others via adapter
BODY MATERIAL
Steel, nickel-plated
TEMPERATURE RANGE
0 to +70 °C (other ranges on request)
WEIGHT
2.23 kg per grip incl. jaws
SCOPE OF SUPPLY
1 pair of grips
PART REF.
UGC-WG-160
Models & Options
Name — Description (Part #)
2-spring standard — Standard pre-clamping load (Specify at order)
3- or 4-spring version — Higher pre-clamping load (Specify at order)
Pyramid jaws 40 x 34 mm — Openings 0–10 or 6–16 mm (Specify at order)
Pyramid jaws 40 x 50 mm — Openings 0–10 or 6–16 mm (Specify at order)
Sawtooth jaws 40 x 34 mm — 1.25 mm pitch, 0–10 mm (Specify at order)
V-jaws — Round Ø 2–10 mm (Specify at order)
Other temperature ranges — Outside 0 to +70 °C (On request)
What's Included
One pair of 10 kN spring-loaded wedge grips with locking function
Spring version as ordered (2, 3 or 4 springs)
Jaw type and opening range specified at order
Supported Test Standards
Compatible Grips & Fixtures
10 kN Benchtop Testing Machine — Galdabini frame matched to the rating
1,500 lb Tensile Tester — Mark-10 motorized tester, via adapter
Adapters — Couplings for other machines
Universal Wedge Grip 10 kN — Lighter 10 kN wedge grip without springs
Plastics Testing — Tensile setups for molded plastic specimens
“Customer quote”
Related Equipment
UGC-WG-110 Universal Wedge Grip 10 kN
Lightweight 10 kN wedge grips with 30 mm wide self-tightening jaws for thin strip, wire and film, plus a -70 to +280 °C
UGC-WG-150 Non-Shift Wedge Grip 20-50 kN
Self-clamping non-shift wedge grips whose jaws move only horizontally, in 20 and 50 kN sizes with 100 and 150 kN version
UGC-WG-170 Small Wedge Grip 10 kN
Compact self-tightening 10 kN wedge grips with 10 mm wide jaws for subsize metal and small plastic specimens, at about 1
UGC-WG-140 Pneumatic Wedge Grip 10-20 kN
Pneumatic wedge grips with the control piston outside the chamber, for -70 to +350 °C tests on short, low-friction speci
Small Wedge Grip with Locking Function 10 kN FAQ
What does the locking function do?
It holds the jaws open so the specimen can be inserted or removed safely; releasing it lets the springs close the jaws.
Why choose a three- or four-spring version?
More springs give a higher pre-clamping load, useful when the specimen needs a firmer initial grip before the wedges tighten under load.
Can I use the pyramid jaws on steel?
The serrated pyramid jaws are not intended for steel specimens. Tell us your material and we will recommend a jaw.
Which round diameters fit?
V-jaws take round specimens of Ø 2–10 mm.
How much does it weigh?
2.23 kg (4.9 lb) per grip including jaws.
What coupling does it use?
A female clevis for a 15.9 mm (5/8 in) or 20 mm pin; other couplings via adapters.




