top of page

Home  ›  Products  ›  Wedge Grips  ›  Non-Shift Wedge Grip 20-50 kN

UGC-WG-150 self-clamping non-shift wedge grip 20-50 kN with open construction by Universal Grip
UGC-WG-150 self-clamping non-shift wedge grip 20-50 kN with open construction by Universal Grip
UGC-WG-150 Non-Shift Wedge Grip 20-50 kN by Universal Grip, view 2
UGC-WG-150 Non-Shift Wedge Grip 20-50 kN by Universal Grip, view 3
UGC-WG-150 Non-Shift Wedge Grip 20-50 kN by Universal Grip, view 4

Non-Shift Wedge Grip 20-50 kN – Self-Clamping

Self-clamping non-shift wedge grips whose jaws move only horizontally, in 20 and 50 kN sizes with 100 and 150 kN versions for larger work.

Brand: Universal Grip  |  Model: UGC-WG-150  |  ● Configured to order

  • Jaws move horizontally only, so clamping does not shift the specimen

  • Wedge action generates the main grip force as the test load rises

  • Open construction accepts wider-than-usual jaws for broad specimens

  • Sizes of 20, 50, 100 and 150 kN

  • Hardened, nickel-plated pyramid and V-jaws; rounds up to Ø 30 mm

  • Operating range 0 to +130 °C (32 to 266 °F)

Standards: ASTM E8  ·  ISO 6892-1  ·  ASTM D3039

Trusted by Global Companies

Self-clamping wedge grips with non-shift jaws

The UGC-WG-150 is a self-clamping wedge grip for 20 kN (4,496 lbf) and 50 kN (11,240 lbf), with larger 100 and 150 kN versions in the same family. As the grip closes, the body moves upward while the jaws travel only horizontally. The specimen is therefore not shifted along its axis or preloaded during clamping, and the main gripping force comes from wedge action as the test load rises.

 

Why the open construction matters

The grip is built with an open construction, which leaves room for wider jaws than a closed wedge body allows. That is useful for broad specimens where a standard jaw would leave the edges unsupported, and for short specimens where every millimeter of grip length counts. Special wide jaws and diamond-coated jaws are available on request.

 

Sizes and jaws

  • 20 kN: jaws 52 x 40 mm; flat 0–22 mm, round Ø 3–22 mm; 4.8 kg (10.6 lb) per grip; clevis for a 15.9 mm (5/8 in) or 20 mm pin

  • 50 kN: jaws 66 x 80 mm; flat 0–30 mm, round Ø 4–30 mm; 15.2 kg (33.5 lb) per grip; clevis for a 31.8 mm (1-1/4 in) pin

  • 100 kN: jaws 95 x 100 mm; flat 0–28 mm; rated 80 kN at 350 °C; 43.2 kg (95.2 lb) per grip

  • 150 kN: jaws 95 x 100 mm; clevis for a 50 mm pin; 43.2 kg per grip

Each size takes hardened, nickel-plated pyramid jaws for flat specimens and V-jaws for round specimens in overlapping ranges, for example 0–10, 6–16 and 12–22 mm on the 20 kN grip. Grips are supplied as a pair without jaws. The standard operating range is 0 to +130 °C, with other ranges on request.

 

Typical applications

Metal flat and round specimens, plastics and composites, wires and bars, and short specimens. These include specimens for tests such as ASTM E8, ISO 6892-1 and ASTM D3039.

 

Related non-shift grips

For air-operated non-shift clamping at 10–20 kN, the UGC-PG-170 pneumatic non-shift wedge grip develops 22 kN of clamping at 7 bar and suits brittle specimens such as ceramics. For manual operation from 50 to 250 kN with a -20 to +180 °C range, see the UGC-WG-130 manual non-shift wedge grips.

On the machine side, the 20 kN grip suits a Galdabini 25 kN benchtop machine, the 50 kN grip a 50 kN frame, and the 100 and 150 kN grips a floor-standing testing machine.

Send us the capacity, specimen geometry and size range, the jaw sets and your coupling, and we will quote the grips. Request a quote.

Mechanical wedge grips

At a glance

  • Max. load: 20 kN or 50 kN (series up to 150 kN)

  • Test type: Tensile

  • Clamping principle: Wedge, non-shift, self-clamping

  • Jaw opening: Flat 0–22 mm (20 kN), 0–30 mm (50 kN)

  • Clamping surface: 52 x 40 mm (20 kN); 66 x 80 mm (50 kN); 95 x 100 mm (100/150 kN)

  • Coupling: Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm pin (20 kN); Ø 31.8 mm (1-1/4 in) pin (50 kN)

Non-Shift Wedge Grip 20-50 kN Specifications

MAX. LOAD

20 kN or 50 kN (series up to 150 kN)

 

TEST TYPE

Tensile

 

CLAMPING PRINCIPLE

Wedge, non-shift, self-clamping

 

JAW OPENING

Flat 0–22 mm (20 kN), 0–30 mm (50 kN)

 

CLAMPING SURFACE

52 x 40 mm (20 kN); 66 x 80 mm (50 kN); 95 x 100 mm (100/150 kN)

 

COUPLING

Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm pin (20 kN); Ø 31.8 mm (1-1/4 in) pin (50 kN)

 

MATERIAL

Steel, nickel-plated; jaws hardened

 

TEMPERATURE RANGE

0 to +130 °C (other ranges on request)

 

WEIGHT PER GRIP

4.8 kg (20 kN); 15.2 kg (50 kN); 43.2 kg (100/150 kN)

 

SCOPE OF SUPPLY

1 pair of grips without jaws

 

PART REF.

UGC-WG-150

 

Models & Options

  • Name — Description (Part #)

  • 20 kN — Jaws 52 x 40 mm; flat 0–22 mm, round Ø 3–22 mm (Specify at order)

  • 50 kN — Jaws 66 x 80 mm; flat 0–30 mm, round Ø 4–30 mm (Specify at order)

  • 100 kN — Jaws 95 x 100 mm; flat 0–28 mm; 80 kN at 350 °C (Specify at order)

  • 150 kN — Jaws 95 x 100 mm; Ø 50 mm pin coupling (Specify at order)

  • Pyramid jaws, 20 kN — Flat 0–10, 6–16 or 12–22 mm (Specify at order)

  • V-jaws, 20 kN — Round Ø 3–10, 8–16 or 12–22 mm (Specify at order)

  • Pyramid and V-jaws, 50 kN — Flat 0–17 or 15–30 mm; round Ø 4–17 or 16–30 mm (Specify at order)

  • Wide and diamond jaws — Special jaw widths and surfaces (On request)

What's Included

  • One pair of non-shift wedge grips in the size ordered

  • Jaws are not included; order pyramid or V-jaw sets (four jaws per set)

  • Female clevis matching the capacity ordered

Supported Test Standards

  • ASTM E8 — Tension testing of metallic materials

  • ISO 6892-1 — Tensile testing of metallic materials at room temperature

  • ASTM D3039 — Tensile properties of polymer matrix composites

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-WG-130 Manual Non-Shift Wedge Grips 50-250 kN

UGC-WG-130 Manual Non-Shift Wedge Grips 50-250 kN

Manual wedge grips that close without moving the specimen axially, in 50, 100 and 250 kN sizes for flat and round specim

UGC-WG-140 Pneumatic Wedge Grip 10-20 kN

UGC-WG-140 Pneumatic Wedge Grip 10-20 kN

Pneumatic wedge grips with the control piston outside the chamber, for -70 to +350 °C tests on short, low-friction speci

UGC-WG-160 Small Wedge Grip with Locking Function 10 kN

UGC-WG-160 Small Wedge Grip with Locking Function 10 kN

Spring-loaded 10 kN wedge grip that locks open for safe specimen loading, then springs closed to set a defined pre-clamp

UGC-WG-170 Small Wedge Grip 10 kN

UGC-WG-170 Small Wedge Grip 10 kN

Compact self-tightening 10 kN wedge grips with 10 mm wide jaws for subsize metal and small plastic specimens, at about 1

Non-Shift Wedge Grip 20-50 kN FAQ

How does the non-shift design work?

As the grip closes, the body moves upward and the jaws move only horizontally, so the specimen is not shifted or preloaded during clamping.

 

Where does the clamping force come from?

Mainly from wedge action as the test load rises, which is why the grip is described as self-clamping.

 

What is the benefit of the open construction?

It allows wider jaws than usual, which helps with broad and short specimens. Special wide jaws are available on request.

 

Which sizes are available?

20, 50, 100 and 150 kN. The 20 and 50 kN sizes are the core of the range.

 

How does it compare with the UGC-PG-170?

The UGC-PG-170 is pneumatically operated for 10–20 kN, while the WG-150 relies on self-clamping wedge action and extends to 150 kN.

 

Are jaws included?

No. The grips are supplied as a pair without jaws.

 

Need help configuring a wedge grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page