top of page

Home  ›  Products  ›  Wedge Grips  ›  Small Wedge Grip 10 kN

UGC-WG-170 small 10 kN wedge grip with 10 mm jaws for subsize specimens by Universal Grip
UGC-WG-170 small 10 kN wedge grip with 10 mm jaws for subsize specimens by Universal Grip
UGC-WG-170 Small Wedge Grip 10 kN by Universal Grip, view 2
UGC-WG-170 Small Wedge Grip 10 kN by Universal Grip, view 3
UGC-WG-170 Small Wedge Grip 10 kN by Universal Grip, view 4

Small Wedge Grip 10 kN – 10 mm Jaws for Subsize Specimens

Compact self-tightening 10 kN wedge grips with 10 mm wide jaws for subsize metal and small plastic specimens, at about 1 kg per grip.

Brand: Universal Grip  |  Model: UGC-WG-170  |  ● Configured to order

  • Wedge jaws tighten themselves as tensile force is applied

  • Narrow 10 mm (0.39 in) jaws for small and subsize specimens

  • Jaw opening 0–8 mm flat and Ø 2–8 mm round

  • About 1 kg (2.2 lb) per grip, suited to small load frames

  • Suitable for ASTM E8 subsize metallic specimens

  • Stainless steel version for -70 to +280 °C (-94 to +536 °F)

Standards: ASTM E8  ·  ASTM D638

Trusted by Global Companies

Compact 10 kN wedge grips for small specimens

Subsize and miniature specimens are easy to overload in a grip built for full-size coupons, and heavy grips eat into the capacity of small load frames. The UGC-WG-170 is sized for the job: a compact, easy-to-use wedge grip with 10 mm (0.39 in) wide jaws, rated at 10 kN (2,248 lbf) and weighing about 1 kg (2.2 lb) per grip.

 

How it works

The jaws are wedge-mounted and tighten themselves as tensile force is applied. Because the grip force builds with the load, there is no need for a high initial clamping force, which reduces the risk of crushing or notching a thin specimen in the grip section before the test starts. Pyramid (serrated) jaws open from 0 to 8 mm for flat specimens, and V-jaws take round specimens of Ø 2–8 mm.

 

Versions

  • Standard: nickel-coated steel, 0 to +70 °C, female clevis for a 15.9 mm (5/8 in) pin

  • Stainless steel: corrosion resistant, -70 to +280 °C, female clevis for a 20 mm pin

Pyramid jaws have a 40 x 10 mm clamping surface; V-jaws are 40 mm high. Further jaw surfaces are available on request. Jaws are ordered separately, and the grips can be ordered singly as well as in pairs.

 

Typical applications

Subsize metal tensile specimens, small plastic specimens, wires and thin rods, and micro and miniature specimens. The grip is suitable for subsize metallic specimens to ASTM E8, and small plastic specimens such as the smaller types in ASTM D638. The stainless version can be used with our environmental chambers across its -70 to +280 °C range.

 

Machine fit

At about 1 kg per grip, the WG-170 works well on lighter frames. It suits Galdabini 5 kN and 10 kN benchtop machines and, with an adapter, Mark-10 F-series motorized testers such as the 750 lbF and 1,500 lbF models, where the tester's capacity sets the limit. If you need wider 30 mm jaws for strip or film, see the UGC-WG-110 universal wedge grip.

Tell us whether you need the standard or stainless version, the jaw type and your coupling, and we will quote the grips. Request a quote.

Mechanical wedge grips

At a glance

  • Max. load: 10 kN

  • Test type: Tensile

  • Jaw opening: 0–8 mm flat; Ø 2–8 mm round

  • Clamping surface: 40 x 10 mm

  • Coupling: Female clevis, Ø 15.9 mm (5/8 in) pin; stainless version Ø 20 mm pin

  • Body material: Steel, nickel-coated (stainless steel version available)

Small Wedge Grip 10 kN Specifications

MAX. LOAD

10 kN

 

TEST TYPE

Tensile

 

JAW OPENING

0–8 mm flat; Ø 2–8 mm round

 

CLAMPING SURFACE

40 x 10 mm

 

COUPLING

Female clevis, Ø 15.9 mm (5/8 in) pin; stainless version Ø 20 mm pin

 

BODY MATERIAL

Steel, nickel-coated (stainless steel version available)

 

TEMPERATURE RANGE

0 to +70 °C (stainless version -70 to +280 °C)

 

WEIGHT

1 kg per grip without jaws

 

SCOPE OF SUPPLY

1 pair of grips without jaws

 

STANDARD

Suitable for ASTM E8 subsize specimens

 

PART REF.

UGC-WG-170

 

Models & Options

  • Name — Description (Part #)

  • Standard — Nickel-coated steel, 0 to +70 °C (Specify at order)

  • Stainless steel — Corrosion resistant, -70 to +280 °C (Specify at order)

  • Pyramid jaws — Serrated, 40 x 10 mm, 0–8 mm (Specify at order)

  • V-jaws — 40 mm height, Ø 2–8 mm (Specify at order)

  • Single grip — Grips can be ordered singly (Specify at order)

  • Other jaw surfaces — Special faces for your specimen (On request)

What's Included

  • One pair of small 10 kN wedge grips (single grips also available)

  • Jaw sets are ordered separately (serrated pyramid or V)

  • Clevis coupling for a 15.9 mm pin (standard) or 20 mm pin (stainless)

Supported Test Standards

  • ASTM E8 — Tension testing of metallic materials (subsize specimens)

  • ASTM D638 — Tensile properties of plastics (small specimen types)

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-WG-110 Universal Wedge Grip 10 kN

UGC-WG-110 Universal Wedge Grip 10 kN

Lightweight 10 kN wedge grips with 30 mm wide self-tightening jaws for thin strip, wire and film, plus a -70 to +280 °C

UGC-WG-160 Small Wedge Grip with Locking Function 10 kN

UGC-WG-160 Small Wedge Grip with Locking Function 10 kN

Spring-loaded 10 kN wedge grip that locks open for safe specimen loading, then springs closed to set a defined pre-clamp

UGC-WG-190 Small Manual Wedge Grip 1 kN

UGC-WG-190 Small Manual Wedge Grip 1 kN

Miniature 1 kN wedge grip with a spring-loaded lever and serrated 8 x 10 mm jaws for fine wires, fibers, films and micro

UGC-WG-150 Non-Shift Wedge Grip 20-50 kN

UGC-WG-150 Non-Shift Wedge Grip 20-50 kN

Self-clamping non-shift wedge grips whose jaws move only horizontally, in 20 and 50 kN sizes with 100 and 150 kN version

Small Wedge Grip 10 kN FAQ

Is this grip suitable for ASTM E8 subsize specimens?

Yes. The 10 mm wide jaws and 0–8 mm opening suit subsize metallic specimens to ASTM E8.

 

Why is no high initial clamping force needed?

The wedge jaws tighten themselves as tensile force is applied, so the grip force builds with the load.

 

What temperature range is available?

0 to +70 °C for the standard nickel-coated grip, and -70 to +280 °C for the stainless steel version.

 

Can I buy a single grip?

Yes. The grips are normally supplied as a pair without jaws, but they can be ordered singly.

 

Which jaws fit round specimens?

V-jaws, 40 mm high, for diameters of 2 to 8 mm.

 

Can it be used on a Mark-10 tester?

Yes, with an adapter, on F-series testers such as the 750 lbF model.

 

Need help configuring a wedge grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page